Innovatronix Tronix Explorer Mini User manual
User's Guide
Explorer Mini User's Manual | © Innovatronix Inc. | www.innovatronix.com | Revision Date: March 10 2015
Foreword
“Shoot in more locations than one”
TRONIX EXPLORER by Innovatronix
Congratulations on your purchase of the Tronix Explorer Mini!
The Tronix Explorer Mini rated at 400 Watts continuous and at 1200-Watts peak power is designed to provide
power to most flash and power pack units. It makes your studio lights work on location or when power is not
available - with faster recycling time more power better performance and a much lighter set up compared to
previous Tronix Explorer models.
•Power and Reliability
400 W continuous 1200Ws peak power inverter
Provides a clean sine wave from a 12V source
Efficient circuit design that generates hundreds of pops for a 500ws lighting set up
•Portability and Flexibility
A very light yet powerful battery pack for about 5 kilos
Compatible to a wide range of bi-voltage digital and analog flash units
Auto-volt/Global charging feature (100V-240VAC)
Comes with Tronix Explorer Mini Carrying Case
It can also be used for powering battery chargers laptops printers etc.
•Safe and Easy to Use
Plug and play
Battery power and charging indicators
Explorer Mini User's Manual | © Innovatronix Inc. | www.innovatronix.com | Revision Date: March 10 2015
Service and Warranty
The Tronix Explorer Mini is covered by a one-year warranty starting from the date of
purchase. From that date the product should be free of any defect in material and
workmanship and it will function in accordance to its stated performance.
Within this period Innovatronix Inc. will repair or replace defective parts. This warranty
only covers failures due to manufacturing defects and workmanship. Hence breakdown of the
product due to gross abuse use with non-recommended equipment or devices and normal
wear and tear is not covered in this warranty.
There are no warranties by use except as stated therein. For unsafe and/or faulty
repairs Innovatronix Inc. and/or sellers shall not be liable by such cases. Any alternation
made to this product by unauthorized service technicians are the sole responsibility of the
owner. Maximum liability for any breach of this agreement or other claim to the use of this
product shall not exceed the purchase price of the product by the customer.
Warranty registration is not required. Warranty is applicable if and only if the product is
used under normal conditions and for its intended purpose.
IMPORTANT!
Limited Warranty on SLA (Sealed-Lead) atteries
Only items with manufacturing defects should be returned for repair replacement or
refund. If the product returned was found opened altered or modified in any way the product
warranty is voided.
SLA battery set is not included in the warranty. Battery performance depends on
charge discharge cycle under the customer's use. In addition SLA batteries must be properly
maintained by keeping it charged or charging every after usage. Otherwise if the battery gets
dried up or diminished hence the product warranty on battery is voided.
Product returns and/or refund policies may differ on every vendor. Contact your vendor
for their customer satisfaction guarantee and warranty programs.
Explorer Mini User's Manual | © Innovatronix Inc. | www.innovatronix.com | Revision Date: March 10 2015
Contents
Important Safety Instructions ...................................................................1
•General Safety
•Electrical Safety
•Battery Safety ...................................................................2
Getting Started ...................................................................3
•hat's in the box?
Installation ...................................................................3
Operation ...................................................................4
Charging ...................................................................5
Maintenance
Battery Replacement ...................................................................6
Troubleshooting ...................................................................7
Frequently Asked Questions ...................................................................8
Technical Specifications ...................................................................10
Service and arranty Contact Information .................................................................11
Explorer Mini User's Manual | © Innovatronix Inc. | www.innovatronix.com | Revision Date: March 10 2015
Important Safety Instructions
Save this User’s Guide. Contents of this user's guide should be followed during installation operation and maintenance of Explorer Mini.
General Safety
•Do NOT expose the Tronix Explorer Mini to dust moisture liquids rain or snow.
•Do NOT block ventilation openings of the Tronix Explorer Mini; Overheating may occur.
•Do NOT place the Tronix Explorer Mini in a compartment with zero clearance.
•Not recommended attachments when used with Tronix Explorer Mini may result in risk of fire electrical
hazard or injury.
•Periodically observe the status of the LED indicators to make sure that Tronix Explorer Mini works as
intended.
Electrical Safety
•Always connect Tronix Explorer Mini to a grounded outlet. The socket outlet to which the product is
connected must be in close proximity and must be easily accessed.
•Flash units and other supported equipment must be properly connected to Tronix Explorer Mini. Secure
working connection and socket from outlet to the inverter.
•Always turn OFF and unplug Tronix Explorer Mini before doing any maintenance.
•Tronix Explorer Mini incorporates multiple power sources. Connect only ONE of these sources at a time.
Though not posing any danger simultaneous connection of any of these sources is NOT recommended.
Disconnect ALL power cords to completely remove power from the unit.
1
Explorer Mini User's Manual | © Innovatronix Inc. | www.innovatronix.com | Revision Date: March 10 2015
Battery Safety
Warning!
Contains potentially hazardous voltages. Do NOT make any changes or modifications to Tronix Explorer Mini
unless otherwise specified. Except for the batteries Tronix Explorer Mini has no serviceable parts.
•CAUTION: Do NOT place the battery near open flame or heat. Explosion may occur.
•CAUTION: Do NOT open the battery. It contains chemicals that are harmful to the skin and eyes. The
battery may also emit dangerous and explosive gas.
•CAUTION: To avoid injury due to electrical hazard remove metal accessories such as wristwatch and
jewelry when replacing battery. Use properly insulated tools and handles.
•CAUTION: Tronix Explorer Mini uses one (1) 12 Vdc/ 9 Ah Sealed Lead-Acid battery pack. Replace with
the same type as originally installed in Tronix Explorer Mini.
•CAUTION: Observe proper polarity when connecting the battery. Incorrect polarity will cause electrical
hazard or damage to Tronix Explorer Mini.
Dispose replaced battery properly. Deliver the battery to its manufacturer for recycling.
I portant!
Innovatronix Inc. does not reco end Explorer Mini for use in life support equip ent, where
alfunction of the product will significantly degrade effectiveness of such equip ent.
Exa ples of life support equip ent are, but not li ited to, the following:
pace akers, blood pu ps, ventilators and dialysis syste s.
2
Explorer Mini User's Manual | © Innovatronix Inc. | www.innovatronix.com | Revision Date: March 10 2015
Getting Started
What's in the box?*
1 x Tronix Explorer Mini Main Inverter unit
1 x Power Cord
1 x Universal Adapter (only for 115 – 60 models)
1 x Car Battery Charger
1 x Carrying Case
1x Tronix Explorer Mini User's Manual
*Contact Tronix customer care service (or seller) if package is deemed incomplete.
Installation
Always place the Tronix Explorer Mini in an environment there is no excess of heat dust and moisture.
1. Make sure that the Tronix Explorer Mini Inverter is switched OFF.
2. Connect the charger plug of battery charger unit to the charging port (14Vdc) located on the front top
panel of the Tronix Explorer Mini Inverter Unit. Make sure that connector is securely plugged in.
3. Plug the power cord to the 100-240 Vac socket of the battery charger unit and plug the power cord to the
100-240 Vac convenience socket or main supply.
4. The red LED (Power indicator) should be ON. When the battery is fully charged the red LED and the
green LED are both turned ON.
If Tronix Explorer Mini is being charged the first time charge the unit for 12 to 15 hours. This step ensures
optimum battery performance. Succeeding charges would only take 4 to 6 hours.
NOTE: The socket outlet to which Tronix Explorer Mini is connected must be in close proximity and must be
easily accessed.
3
Explorer Mini User's Manual | © Innovatronix Inc. | www.innovatronix.com | Revision Date: March 10 2015
Operation
1. Make sure that Tronix Explorer Mini is charged as instructed in Installation. Set up the necessary lighting
equipment.
2. Connect the plug of the flash unit being used to one of the Tronix Explorer Mini's sockets.
Note: The connections between the flash units and Explorer ini ust be in close proxi ity and ust be easily accessed.
3. Turn on Tronix Explorer Mini by switching the power switch to “|” position. There are two (2) battery level
indicators (Green LED for Battery Full and Red LED for Battery Low).
4. The Tronix Explorer Mini is now supplying power to the flash units. Test the flash units. If desired lighting
requirements are set proceed with the photo shoot.
NOTE: Using odeling la ps in the flash units will prolong recycling charging ti e and will easily discharge the battery.
Therefore, it is advised not to use odeling lights when using the Tronix Explorer Mini as a power source.
5. Observe proper positioning of Tronix Explorer Mini air vents should not be obstructed to avoid
overheating.
Below is a table of Tronix Explorer Mini LEDs’ status and its corresponding indication:
Status Indication Voltage Output
Battery Full Green LED indicator stays lit Yes
Battery Low (Warning) Red LED indicator is blinking with two
times beeping sound.
Yes
Battery Low (Shutdown) Red LED indicator is blinking with three
times beeping sound.
No
Overload Condition Green and Red LED is lit off with
beeping sound.
No
Thermal Shutdown Green LED is blinking and Red LED is
off with pulsating beep
No
I portant: Make sure that the air vents (a) at the back of the unit are not obstructed. You can operate the unit
while inside the bag given that the unit is as demonstrated in figure (b) it may also be in a different position as
long as the vents are unobstructed. Positioning the unit as demonstrated in figure (c) (upright) may cause the
Mini to overheat.
4
Explorer Mini User's Manual | © Innovatronix Inc. | www.innovatronix.com | Revision Date: March 10 2015
Charging
•Make sure that the Tronix Explorer Mini is switched OFF.
•See Installation procedures above.
REMINDER: DO NOT STORE THE UNIT FOR MORE THAN A MONTH WITHOUT CHARGING. CHARGE IT AT
LEAST ONCE A MONTH FOR OPTIMUM BATTERY PERFORMANCE.
When the unit is accidentally discharged in full (unit was left-on for a long time even after low battery shut down) slight
abnormality may be observed when trying to recharge the unit. When charged unit may falsely show that battery is full. Just
repeatedly plug and unplug the unit every 30 minutes until battery recovers and the indicator starts to blink.
Charging Guide
Status Indication
Not Connected Red LED is on
Charging Red LED is on Green LED is blinking
Battery Full Red LED is on and Green LED is on
Maintenance
•For optimum performance keep the battery fully charged. A lit Green charging LED indicates a fully
charged battery. On the other hand when the inverter gives three (3) beeps prior to shutdown the
batteries are discharged.
•Turn off the unit when not in use. Leaving Tronix Explorer Mini on when unused will severely drain the
battery.
•Use a dry cloth when cleaning the unit. Do not use any liquid or detergents.
•Coil cables when not in use. Loose cables may cause accidents.
5
Explorer Mini User's Manual | © Innovatronix Inc. | www.innovatronix.com | Revision Date: March 10 2015
attery Replacement
Caution!
Risk of electric shock. Extre e caution should be observed at all ti es. Before replacing the
batteries, disconnect all cords and wait 30 inutes before proceeding with the repair. Re ove all
etal objects attached to the body such as jewelry, wristwatch, and the like. Use properly insulated
tools and handles. Strictly follow the instructions to avoid further da age and injury.
1. Make sure Explorer Mini is switched off.
2. Remove the screws on the side of the top plastic cover.
3. Remove the plastic cover. Remove the screws on the side of the top metal cover.
4. Remove the metal cover. Lift the battery and carefully disconnect the wires on the battery terminals.
5. Connect a new 12 V/9 Ah SLA battery
6. Connect the red wire to the positive (+) terminal
7. Connect the black wire to the negative (–) terminal.
8. Place the battery back to its position.
9. Place back the metal cover. Tighten all screws.
10. Place back the plastic cover. Tighten all screws.
Dispose replaced battery properly. Deliver the battery to its manufacturer for recycling or observe proper battery
disposal.
Note:
Do not interchange the polarity of the wires. Black wire is for the negative (–) terminal and red wire is for the
positive (+) terminal.
6
Explorer Mini User's Manual | © Innovatronix Inc. | www.innovatronix.com | Revision Date: March 10 2015
Table of contents
