INNOCN 25G1G User manual
25G1G
English
Contents
Precautions
Package Content
Installation
Adjustment of monitor
Instructions for use
OSD menu
Specification
German Rhine TÜV Low Blue Light Certfication
Common troubleshooting
Warranty Information
Contact us
1
2
3
5
10
7
10
11
12
12
5
English
1
Precautions
Keep the monitor away from water sources or damp places, such as bath rooms, kitchens,
basements and swimming pools.
Make sure the monitor is placed on a flat surface. If the monitor falls down, it may cause human
injury or device damage.
Store and use the monitor in a cool, dry and well ventilated place, and keep it away from emission
and heat sources.
Do not cover or block the vent hole in the rear casing, and do not use the product on a bed,sofa,
blanket or similar objects.
The range of the supply voltage of the monitor is printed on the label on the rear casing.If it is
impossible to determine the supply voltage, please consult the distributor or local power
company.
If the monitor will not be used for a long period, please cut off the power supply to avoid electric
shock in rainy days and damage due to abnormal supply voltage.
Please use a reliable grounded socket,Do not overload the socket, or it may cause fire or electric
shock.
Do not put foreign matters into the monitor, or it may cause short circuits resulting fire or electric
shock.
Do not disassemble or repair this product by self to avoid electric shock. If faults occur, please
contact the after-sales service directly.
Do not pull or twist the power cable forcedly.
There is a polarizer layer (not a protective film) on the surface of the screen. Do not peel it off, or
the product may be damaged and the warranty will be invalid.
English
2
2
Package Content
Packing list
Please check that the package of the monitor contains all parts. If any part is lost, please contact
the distributor.
The color and shape of parts may vary with models. Figures in this User Manual are for reference only.
Cables supplied may vary with purchased products. Figures in this User Manual are for reference only.
Display screen Stand Base
ScrewdriverPower AdapterDP Cable
QSG
25G1G
Quick Installation Guide
使用产品前请仔细阅读本说明书，并妥善保管
Beforeusing this product, please read this User Manual carefully and keep it well
本製品をご使用になる前に、本ユーザーマニュアルをよくお読みになり、大切に保管してください
Veuillez,avant d'utiliser ce produit, lire attentivement ce manuel et le conserver en lieu sûr
LesenSie vor Verwendung dieses Produkts sorgfältig die Bedienungsanleitung und bewahren Sie sie gut auf
3pcs screws PM4*8mm3pcs screws KM4*8mm
Warranty Card
Need Help? We are here!
Contact Us
service@innocn. com
Home Page
www.innocn.com
We are fully dedicated to your 100 %satisfact ion.
Please do not return this product back to the store directly. We are alwa ys
here to help! Innocn provide s 1 Year Warranty.If you have any questio ns using
the product, please contact o ur surpport team.We will resolve yo ur problem
over online chat or e mail, provice replacement pro duct or warranty repair.
English
3
Installation of base
Installation
Note: During standing of the monitor, do not take out the monitor from foams, and do not pinch
the liquid crystal screen with hand to avoid damage to the screen.
1.Open the package,take out the product with foam still attached,and gently place it on a desktop or
table.
3.Buckle the assembled bracket chassis on the whole machine(insert the upper part and press down).
If you want to remove the bracket chassis,pull down the button on the rear shell to remove the
bracket chassis.
4.Place the monitor on your desktop or table after completing installation.
2.Take out the shaft assembly,bracket and base,use two pm4x8 blue zinc plated acrews to lock the
shaft assembly and bracket,and then use two km4x8 black zinc plated screws to lock the bracket
and base.
Do not press the LCD
PM4*8x2
KM4*8x2
English
4
Wall mounting
1. Remove the whole machine (Polygon together)
and place it on a horizontal table.
2. Remove the pivot bracket.
3. The back shell on this location 4 silk removed.
Remove the 4 screws from this position
4. Screw the 4 hexagonal studs of the attachment
in this position, for transferring to the
wall-mounted rack. (This machine does not
come with a wall bracket, you have to buy it
separately. Standard VESA hole 75*75mm)
Screw the attached 4 hexagonal
studs in this position
Wall
Wall Mount
Bracket
Wall
5. Assembled products can be wall-mounted, hanging products in the process, please do not use
your hands directly pinch the screen to prevent broken screen.
English
5
Instructions for use
Cable connection：
* The bottom interface configuration at the back of the monitor varies with products.
* Note: If the power cable or signal cable is damaged, you must replace it with special soft cables or
special components purchased from the manufacture or maintenance department.
OR
AUDIO OUT
Connect audio outputting
devices such as earphones
to the AUDIO OUT port.
DP interface
Use the DP cable to
connect the DP IN port of
the product to the DP
OUT port of a PC.
HDMI interface
Use the HDMI-DVI cable
(not included) to connect
the HDMI IN port of the
product to the DVI OUT
port of a PC.
Use the HDMI cable to
connect the HDMI IN port
of the product to the
HDMI OUT port of a PC
DC IN port
Please connect the power adap-
ter to the power cord,connect
the power adapter plug to the
corresponding power port of
the monitor, and then connect
the power cord to a properly
grounded power socket.
-5° 20°
Tilting angle
-5.0°- +20°
Adjustment of monitor
English
6
Instructions for use
Description of buttons
Explanation of indicator light
1 2 3 4 5
6
6. Solid blue light indicates power is on and the monitor is operating normally. Flashing blue light
indicates no video source , no horizontal or vertical signal has been detected or power is low.
Please ensure your computer is on and all video cables are fully inserted and / or connected.
Button Function
1
2
3
4
5
Press Rocker up: Select upwards/plus. Light effect switch shortcut button.
Power Button: Turn monitor off/on.
Press Rocker to the right: Main Menu / Ok.
Press Rocker down: Select downwards/minus. Crosshair shortcut button.
Press Rocker to the left: Exit / return.
English
7
OSD menu
Menu description
The color and shape of the OSD menu of the actual computer may be slightly different from them
shown in the figure.
Specifications of the OSD menu may change with improvements of functions without prior notice.
The screen display (OSD) menu can be used to adjust settings of the monitor and is shown on the
screen after the monitor is powered on and the button is pressed.
1. Press one of the buttons ( ) to activate the browser screen.
When booting for the first time, you need to set the default language of the monitor menu.
Press buttons ( ) to select the language to be set, and press the OK right( ) to confirm.
Please select the default language
请选择默认语言
简体中文
ENGLISH
DEUTSCH
ITALIANO
한국어
日本語
TURKCE
POLSKI
NEOERLANDS
1
2
3
1 Light effect switch shortcut button
2 Turn off/on the monitor
3 Exit
4 Crosshair shortcut button
5 Main Menu
4
5
English
8
3. Press or to scroll through the functions.
- Select the desired function, and press to enter the sub-menu.
- Press or to scroll through sub-menus, and press key to select and confirm the desired function.
- Press or to select one option, and press to confirm settings and exit from the current menu.
4. Press to exit from the menu screen
2. Press to enter the OSD screen.
Functions of the monitor vary with models, and the functions in this manual are for reference only
BRIGHTNESS
BRIGHTNESS 0 - 100
0 - 100
STANDARD/TEXT/GAME/MOVIE/FPS/RTS
ON/OFF
CONTRAST
ECO
DCR
Table of contents
Other INNOCN Monitor manuals
INNOCN
INNOCN PU15-PRE User manual
INNOCN
INNOCN 15K1F User manual
INNOCN
INNOCN 27G1G User manual
INNOCN
INNOCN 27G1G User manual
INNOCN
INNOCN 40C1R User manual
INNOCN
INNOCN 39G1R User manual
INNOCN
INNOCN 34C1Q User manual
INNOCN
INNOCN 27C1U-D User manual
INNOCN
INNOCN 13A1F User manual
INNOCN
INNOCN N2F User manual
