Inland 08419 User manual
Quick setup guide for the 08419 USB 2.0 SATA enclosure
The included accessories:
Step 1.) Unpack your enclosure to ensure you have all the necessary components.
Remove cover so you can install your drive.
Step 2.) Locate the SATA connector on your hard drive.
Step 3.) Lineup your drive’s SATA connector with the SATA connector located inside
the enclosure.
Step 4.) Carefully insert the drive into the enclosure.
Step 5.) Lineup the four (4) screw holes between the enclosure and the cover.
Step 6.) Install the four (4) black screws
Step 7.) Install the four (4) silver color screws on the bottom to secure your drive to the
enclosure
Step 8.) Attach the included power adapter to an available power outlet. Attach the other
end of the power adapter to the enclosure as shown
Step 9.) Attach the included USB cable to the enclosure as shown
Step 10.) Attach the included USB cable to your desktop or notebook computer. This
will work in any available USB port.
Step 11.) Switch-on your enclosure
Enjoy! You are now completed in setting up the enclosure.
For use with the “OTB” One Touch Backup features, please refer to the inland Products,
Inc. website for the latest software downloads and instructions.
Here is the link to the product page:
http://inlandproduct.com/35satausb20hddenclosure.aspx
For help with this product, please complete the above steps, then go to our support page:
http://www.inlandus.com/support.html
Other Inland Enclosure manuals
