Ingrasys iPoMan II-1200 User manual
Power Distribution Unit
(iPoMan II-1200)
V
Ve
er
rs
si
io
on
n
1
1.
.0
0
iPoMan II-1200
~2~
Preface
About this Manual
Congratulations on purchasing the iPoMan II-1200. This user
manual provides detailed descriptions of the hardware
components and how to use the iPoMan II-1200. Read this
manual carefully and follow the instructions while using the
iPoMan II-1200.
Copyright Information
No part of this manual, including the products and software
described in it, may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language in
any form or by any means, except documentation kept by the
purchasers for backup purposes, without the express written
permission of the manufacturer.
Products and corporate names appearing in this manual may or
may not be registered trademarks or copyrights of their
respective companies, and are used only for identification or
explanation and to the owners’ benefit, without intent to
infringe. All trademarks are the property of their respective
owners.
Copyright © 2007. All rights reserved.
iPoMan II-1200
~3~
Safety Instructions
Follow these safety instructions to avoid injury to self and
damage to the iPoMan II-1200.
•To reduce the risk of fire or electric shock, install the
unit in a temperature-controlled indoor area free of
conductive contaminants. Do not place the unit near
liquids or in an excessively humid environment.
•Do not allow liquids or foreign objects to enter the unit.
•The unit does not contain any user-serviceable parts. Do
not open the unit.
•Servicing, maintenance, and repair for this equipment
must be performed by qualified service personnel.
Remove rings, watches and other jewelry before
servicing the unit.
•Before maintenance, repair or shipment, the unit must be
completely switched off and unplugged and all
connections must be removed.
•Before plugging in the power cord of the device, make
sure that the power source rating matches the power
rating of the iPoMan II-1200.
•Use a standard power cord when connecting any device
to the outlets of iPoMan II-1200.
•The digital output only can connect switches, indicators,
or other output devices that are normally open or
normally closed.
iPoMan II-1200
~4~
Safety Notices
Caution:
This unit has been provided with a real time
clock circuit. There is a danger of explosion
if the battery is incorrectly replaced.
Replace only with a 3V Lithium cell
(CR2032) or equivalent type. Discard used
b
atteries according to the manufacturer’s
instructions.
Caution:
Rack-Mounted Equipment – The unit is
intended to be rack-mounted, the
Installation Instructions shall contain
wording to address the following concerns
when the unit is mounted in a rack system.
A.
“The equipment is to be installed
in an environment with maximum
ambient temperature must not
exceed 50°C.”
B. “The openings on the enclosure
are for air convection hence
protected the equipment from
overheating. DO NOT COVER
THE OPENINGS.”
C. “Lay this equipment on a reliable
surface when install. A drop or
fall could cause injury.”
D. “The equipment shall be installed
according to specification as
nameplate. Make sure the voltage
of the power source when connect
the equipment to the power outlet.
The current of load and output
iPoMan II-1200
~5~
power of loads shall be not over
the specification.”
E. “This equipment must be
connected to the reliable earth
before using.”
iPoMan II-1200
~6~
Table of Content
Preface......................................................................... 2
About this Manual................................................................... 2
Copyright Information............................................................ 2
Safety Instructions .................................................................. 3
Safety Notices......................................................................... 4
Introduction the iPoMan II-1200.............................. 7
Features................................................................................... 8
Package Contents.................................................................... 9
Hardware Components.......................................................... 10
Getting Started ......................................................... 14
Attaching the Feet................................................................. 14
Attaching the Ears................................................................. 14
Rack Mounting...................................................................... 14
Making Connections............................................................. 15
Daisy Chaining...................................................................... 20
Using the Console Menu.......................................... 23
Using HyperTerminal ........................................................... 23
Navigating through the Console Menu................................. 25
Setting the IP Address........................................................... 27
Using the Web Interface.......................................... 28
Overview............................................................................... 28
Modifying the Basic Settings................................................ 29
Modifying Application Settings............................................ 31
Appendix................................................................... 35
Specifications........................................................................ 35
Error codes............................................................................ 37
Regulatory Information......................................................... 38
iPoMan II-1200
~7~
Introduction the iPoMan II-1200
Congratulations on purchasing the iPoMan II-1200, an
intelligent power management system. The iPoMan II-1200 is
designed to measure the input and individual outlet current
consumption and auto email history report to supervisor for
power bill charge. At the same time, the iPoMan II provides the
useful ability of managing power for any combination of
network equipment connected to it. User can control the power
on/off for any device connected to the iPoMan II-1200,
remotely, using a console or Ethernet connections. The iPoMan
II-1200 comes with twelve power outlets, each of which can be
monitored and controlled through the console or web interfaces.
The iPoMan II-1200 is also equipped with a console port for
connecting an EMD (Environmental Monitoring Device) for
sensing temperature and humidity along with two alarms that
can be activated when either of the sensors shows unusual
values. The iPoMan II-1200 is provided with two digital outputs
which users can use for connecting status indicators or digital
switches.
iPoMan II-1200
~8~
Features
•To calculate the power consumption on hourly basis, and
have an accumulation of daily
•Provide detail data-logging for statistical analysis and
diagnostic then auto email daily history report
•Daisy-chaining can cascade up 6 pieces iPoMan II
•Sequential power-up on the outlets / Allows users to
configure the sequence in which power is turned on or
off for each outlet
•Intelligently turn on/off devices based on event
occurrence or planned schedule
•Event notification by pop-up/Sending Trap or E-Mail for
events notification
•Twelve power outlets that can be turned on or off in
multiple ways, with easy monitoring of current
consumption
•Set over-current watchdog for each outlet (Threshold
settings for over-current warnings and alerts)
•Versatile sensors supported through EMD
(Environmental Monitoring Device) inputs
•Activate extended devices via digital outputs
•Comprehensive power management and flexible
configuration through web browser, NMS, Telnet,
SNMP, or HyperTerminal (console)
•Support Secure Socket Layer V3 and Secure Shell V1
protocols
•Administrator and multiple users with password
protection for double-layer security
•Address-specific IP security masks to prevent
unauthorized access
•User-friendly interface to display input and output status
•Upgrade utility for easy firmware upgrade
•Available in 120V and 230V models
iPoMan II-1200
~9~
Package Contents
Make sure the iPoMan II-1200 package has the following items.
If any of items is missing or damaged, contact your nearest
service center or vendor.
1. iPoMan II-1200
2. Ears (x2)
3. U-type handles (x2)
4. U-type handle screws (x4)
5. Ear screws (x6)
6. Feet screws (x4)
7. Software CD
8. Feet (x4)
9. Quick Install Guide
10. Power cord (x2) for 2-inlet model;
Power cord (x1) for 1-inlet model
11. Serial cable
iPoMan II-1200
~10~
Hardware Components
Take a moment to familiarize yourself with the iPoMan II-1200
front and rear panels. The following sections provide
descriptions about the front and rear panel components and how
to use them.
Front Panel of 2-inlet Model
Front Panel of 1-inlet Model
Component Description
1. Input power status
indicator 2-inlet Model: Display power status for
each input power G1 through G2
1-inlet Model: Display power status for the
input power G1
2. Output power status
indicator (A ~ L) Display power status for each power outlet
A through L
3. Status indicator Display input current, voltage, frequency,
12
3
4
5
67
8 9
Other manuals for iPoMan II-1200
1
Table of contents
Other Ingrasys Power Distribution Unit manuals
