Ingersoll-Rand BL2000B User manual
BALLOON
LIGHT
BL2000B
Operation and
Maintenance
Manual
This manual contains important safety information.
Do not destroy this manual.
This manual must be available to all personnel who operate and maintain this device.
4900059 (04-06) April 2006
Revised (01-13)
Doosan purchased Bobcat Company from Ingersoll-Rand Company in
2007. Any reference to Ingersoll-Rand Company or use of trademarks,
service marks, logos, or other proprietary identifying marks belonging
to Ingersoll-Rand Company in this manual is historical or nominative
in nature, and is not meant to suggest a current affiliation between
Ingersoll-Rand Company and Doosan Company or the products of
either.
Models represented in this manual may be used in various locations world-wide. Equipment shipped
within European Union territories is required to display a CE mark and conform to various Directives. In
these cases the design specification of the equipment is certified as complying with EC Directives listed.
Any modification of the part is absolutely prohibited and would result in the CE Certification and Marking
being rendered invalid. A declaration of that conformity follows :
DECLARATION OF CONFORMITY WITH EC DIRECTIVES
89/336/EEC
Ingersoll-Rand European Sales
Company Limited
Swan Lane, Hindley Green
Wigan WN2 4EZ
United Kingdom
We
Represented in EC by:
Declare that, under our sole responsibility for manufacture and supply, the models
BL2000 - 220/60
BL2000 - 220/50
BL2000 - 110/50
To which this declaration relates, is (are) in conformity with the provisions of the
directives using the following principal standards:
NF EN 50081 - 1&2 ; NF EN 50082 - 1&2 ; NF EN 55015 ; NF EN 60598 - 1, 2 & 4
Issued at Hindley Green, February 2006
Mr. P Edgeller
Technical Manager
Ingersoll-Rand Company
P.O. Box 868
501 Sanford Avenue
Mocksville, North Carolina 27028
4900059 (04-06) 1 Balloon Light BL2000B
Operation and Maintenance Manual
Contents
Contents
Contents............................................................................................................................................................................1
Foreword...........................................................................................................................................................................1
Safety................................................................................................................................................................................3
Operating Instructions.......................................................................................................................................................5
Maintenance......................................................................................................................................................................9
Fault finding.....................................................................................................................................................................11
Specifications..................................................................................................................................................................13
Parts................................................................................................................................................................................15
Warranty..........................................................................................................................................................................17
Foreword
The contents of this manual are considered to be proprietary and confidential to Ingersoll-Rand and should not be
reproduced without the prior written permission of Ingersoll-Rand.
Nothing contained in this document is intended to extend any promise, warranty or representation, expressed or implied,
regarding the Ingersoll-Rand products described herein. Any such warranties or other terms and conditions of sale of
products shall be in accordance with the standard terms and conditions of sale for such products, which are available
upon request.
This manual contains instructions and technical data to cover all routine operation and scheduled maintenance tasks by
operation and maintenance staff. Major overhauls are outside the scope of this manual and should be referred to an
authorized Ingersoll-Rand service department.
Details of approved equipment are available from Ingersoll-Rand Service departments.
The use of repair parts other than those included within the Ingersoll-Rand approved parts list may create hazardous
conditions over which Ingersoll-Rand has no control. Therefore, Ingersoll-Rand cannot be held responsible for
equipment in which non-approved repair parts are installed.
Ingersoll-Rand reserves the right to make changes and improvements to products without notice and without incurring
any obligation to make such changes or add such improvements to products sold previously.
This company accepts no responsibility for errors in the translation of this manual from the original English version.
Balloon Light BL2000B 2 4900059 (04-06)
Operation and Maintenance Manual
Foreword
4900059 (04-06) 3 Balloon Light BL2000B
Operation and Maintenance Manual
Safety
Safety
Contents
General safety information................................................................................................................................................3
Storage..............................................................................................................................................................................3
Transport...........................................................................................................................................................................3
General safety information
Protect the envelope from aggressive external contacts
(projectiles, electric wires, walls, trees, animals, etc.)
Do not clean the Balloon BL2000B with a solvent.
If the envelope gets damp, dry before storing.
Do not kick the Balloon BL2000B.
To extend bulb lifetime, avoid touching the bulbs with your
bare hands. Use the glove provided.
Do not cut the electric cable.
Do not switch on the Balloon BL2000B if the cable is
wound up.
Make sure that the tripod is stable and firmly anchored in
windy conditions.
Do not use the Balloon BL2000B if wind speed exceeds
80 km/h.
Generator set: minimum recommended capacity:
• Single phase 230V - 2kVA - 10A minimum.
• Single phase 115V - 2kVA - 20 A minimum.
Be careful of phase unbalance if several devices are
connected to the same generator.
Storage
Store the Balloon BL2000B in its storage bag.
Store in a dry, ventilated area.
Do not store the Balloon BL2000B near a heat source.
Donotstore the BalloonBL2000B near chemical products.
Do not store anything else in the storage bag that may
interfere with the envelope or equipment provided.
Transport
Transport the Balloon BL2000B in its storage bag.
Balloon Light BL2000B 4 4900059 (04-06)
Operation and Maintenance Manual
Safety
4900059 (04-06) 5 Balloon Light BL2000B
Operation and Maintenance Manual
Operating Instructions
Contents
Overview ...........................................................................................................................................................................6
Identification of elements ........................................................................................................................................6
List of parts .............................................................................................................................................................6
Assembly and installation..................................................................................................................................................7
Unfolding the envelope...........................................................................................................................................7
Assembling (bulb installation).................................................................................................................................7
Installing the Balloon BL2000B...............................................................................................................................8
Inflating and switching on the Balloon BL2000B.....................................................................................................8
Disassembly......................................................................................................................................................................8
Switching off and deflating......................................................................................................................................8
Folding and storing .................................................................................................................................................8
Balloon Light BL2000B 6 4900059 (04-06)
Operation and Maintenance Manual
Operating Instructions
Overview
The Balloon BL2000B is an illumination device specifically
designed for night work inside and outside to assist during
rescue, safety, worksite operations etc.
Identification of elements
Figure 1
List of parts
Figure 2
Reference Description
1Nut
2 Envelope
3 Protection bowl
4 Support stand
5Zip
6Bulbs
7 Cover
8 South pole
9 Telescopic pole (optional)
10 Power supply cable
S1702
5
1
2
3
4
10
6
7
8
9
Reference Description
11Envelope
2 1 Internal equipment (bowl + base + support stand)
34Bulbs
4 1 Accessory kit (glove, thumb wheels, nut, fuses)
5 1 Repair kit (2 sheets)
6 1 Storage bag
7 1 User manual
8 1 Packing foam
S1735
1234
56 7
4900059 (04-06) 7 Balloon Light BL2000B
Operation and Maintenance Manual
Operating Instructions
Assembly and installation
Unfolding the envelope
1. Unfold the envelope on a smooth, clean surface.
2. Open the zip.
Assembling (bulb installation)
Note: This operation is necessary before using the
equipment for the first time. Afterwards, the
bulbs may be left installed for transport.
1. Open the zip.
2. Unscrew the plastic thumb wheels and remove the
envelope.
Figure 3
3. Remove the protective bowl from the fan part.
Figure 4
4. Place the 4 bulbs in their respective lamp holders
inside the protective bowl.
Figure 5
5. Put the protective bowl back on the fan part.
6. Put the envelope back in place.
7. Tighten the thumb wheels.
8. Close the zip.
S1710
S1711
IMPORTANT
Handle the bulb with the supplied gloves. We
recommend cleaning the bulb with methylated
spirits before each use.
WARNING
If a bulb breaks or cracks inside the balloon,
disconnect the electrical power supply and
disassemble the envelope to remove the fragments
of glass.
Use a vacuum cleaner to clean the equipment. Be
careful not to cut your fingers when handling the
fragments of glass.
S1712
Balloon Light BL2000B 8 4900059 (04-06)
Operation and Maintenance Manual
Operating Instructions
Installing the Balloon BL2000B
1. Install the Balloon BL2000B on the telescopic pole.
2. The equipment is now ready for inflation.
Inflating and switching on the Balloon BL2000B.
1. Connect the power plug to the mains or generating set.
Figure 6
2. The envelope will start to inflate.
Disassembly
Switching off and deflating
1. Disconnect the Balloon BL2000B from its power
supply.
2. Wait 5 minutes for the bulbs to cool down.
3. Remove the Balloon BL2000B from its telescopic pole.
4. Open the zip to accelerate deflation.
Folding and storing
1. Place the Balloon BL2000B in its storage bag.
WARNING
When assembling the telescopic pole, pay
attention to carefully lock the tightening rollers of
the pole. If the elements of the pole come loose,
they might pinch or injure your fingers.
S1713
Table of contents
Other Ingersoll-Rand Work Light manuals
Popular Work Light manuals by other brands
PowerSmith
PowerSmith PWLD080T Operator's manual
MaxLite
MaxLite 73683 installation instructions
Heitronic
Heitronic Trend 27867 Installation and operating instructions
Monzana
Monzana Gore MZCL10 manual
EINHELL
EINHELL TE-CL 18/2000 LiAC Original operating instructions
Bayco
Bayco NIGHTSTICK Dual-Light Xtreme Lumens... instruction manual