InFocus IN119HDxa User manual
1English
Setup |
Audio Settings.................................... 44
Setup |
Advanced........................................... 45
Options .............................................. 46
Options | Advanced............................ 48
Options |
Lamp Settings.................................... 49
Options | ........................................... 50
Optional Filter .................................... 50
Settings............................................. 50
Appendices....................................51
Troubleshooting ................................51
Image Problems................................. 51
Other Problems.................................. 53
Remote Control Problems ................. 53
LED Lighting Messages..................... 54
On Screen Messages ........................ 55
Replacing the Lamp..........................56
Installing and Cleaning the Dust Filter.. 58
Compatibility Modes .........................59
Ceiling Mount Installation..................61
Regulation & Safety Notices .............62
FCC Notice ........................................ 62
Declaration of Conformity for
EU countries ...................................... 63
Table of Contents ............................1
Usage Notice...................................2
Safety Information...............................2
Precautions.........................................3
Eye Safety Warnings ..........................6
Introduction......................................7
Package Overview..............................7
Product Overview ...............................8
Main Unit.............................................. 8
Keypad................................................. 9
Input/Output Connections .................. 10
Remote Control.................................. 11
Installation .....................................12
Connecting to the Projector ..............12
Connecting a Computer/Notebook .... 12
Connecting a Video source................ 13
Connect to 3D Video Devices...........14
Using the 3D glasses........................16
Powering On/O the Projector..........17
Powering On the Projector................. 17
Powering O the Projector ................ 18
Warning Indicator............................... 19
Adjusting the Projected Image..........20
Adjusting the Projector’s Height ........ 20
Adjusting the Projector’s Zoom / Focus... 21
Adjusting Projection Image Size ........ 21
User Controls ................................23
Keypad & Remote Control ................23
Keypad............................................... 23
Remote Control.................................. 24
On-screen Display Menus ................30
How to operate .................................. 30
Menu Tree.......................................... 31
Image................................................. 35
Image | Advanced .............................. 37
Display ............................................... 39
Display | 3D ...................................... 41
Setup ................................................. 42
Table of Contents
2
English
Usage Notice
The lightning ash with arrow head within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sucient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH
VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE
CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
Class B emissions limits
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Important Safety Instruction
1. Do not block any ventilation openings. To ensure reliable operation of the
projector and to protect from over heating, it is recommended to install the
projector in a location that does not block ventilation. As an example, do
not place the projector on a crowded coee table, sofa, bed, etc. Do not
put the projector in an enclosure such as a book case or a cabinet that
restricts air ow.
2. Do not use the projector near water or moisture. To reduce the risk of re
and/or electric shock, do not expose the projector to rain or moisture.
3. Do not install near heat sources such as radiators, heaters, stoves or any
other apparatus such as ampliers that emit heat.
4. Clean only with dry cloth.
5. Only use attachments/accessories specied by the manufacturer.
6. Do not use the unit if it has been physically damaged or abused. Physical
damage/abuse would be (but not limited to):
- Unit has been dropped.
- Power supply cord or plug has been damaged.
- Liquid has been spilled on to the projector.
- Projector has been exposed to rain or moisture.
- Something has fallen in the projector or something is loose inside.
Do not attempt to service the unit yourself. Opening or removing covers
may expose you to dangerous voltages or other hazards. Please call
InFocus before you send the unit for repair.
7. Do not let objects or liquids enter the projector. They may touch
dangerous voltage points and short out parts that could result in re or
electric shock.
8. See projector enclosure for safety related markings.
9. The unit should only be repaired by appropriate service personnel.
Safety Information
3English
Usage Notice
Please follow all warnings, precautions and
maintenance as recommended in this user’s guide.
When the lamp
reaches the end
of its life, the
projector will not
turn back on until
the lamp module
has been replaced.
To replace the
lamp, follow the
procedures listed
under “Replacing
the Lamp”
section on pages
56-57.
▀■Warning- Do not look into the projector’s lens when the
lamp is on. The bright light may hurt your eyes.
▀■Warning- To reduce the risk of re or electric shock, do
not expose this projector to rain or moisture.
▀■Warning- Please do not open or disassemble the
projector as this may cause electric shock.
▀■Warning- When replacing the lamp, please allow the unit
to cool down. Follow instructions as described
on pages 56-57.
▀■Warning- This projector will detect the life of the lamp
itself. Please be sure to change the lamp when
it shows warning messages.
▀■Warning- Reset the “Lamp Reset” function from the on-
screen display “Options|Lamp Settings” menu
after replacing the lamp module (refer to page
49).
▀■Warning- When switching the projector o , please ensure
the cooling cycle has been completed before
disconnecting power. Allow 90 seconds for the
projector to cool down.
▀■Warning- When the lamp is approaching to the end of its
life time, the message “Lamp life exceeded.”
will show on the screen. Please contact your
local reseller or service center to change the
lamp as soon as possible.
Precautions
4
English
Usage Notice
Do:
Turn o and unplug the power plug from the AC outlet before
cleaning the product.
Use a soft dry cloth with mild detergent to clean the display
housing.
Disconnect the power plug from AC outlet if the product is not
being used for a long period of time.
Do not:
Block the slots and openings on the unit provided for ventilation.
Use abrasive cleaners, waxes or solvents to clean the unit.
Use under the following conditions:
- In extremely hot, cold or humid environments.
`Ensure that the ambient room temperature is within 5°C ~
40°C
`Relative humidity is 10% ~ 85%
- In areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic eld.
- In direct sunlight.
Viewing 3D projection using the 3D function
IMPORTANT SAFETY INFORMATION. READ THE FOLLOWING
WARNINGS BEFORE YOU OR YOUR CHILD USE THE 3D FUNCTION.
Warning
Children and teenagers may be more susceptible to health issues
associated with viewing in 3D and should be closely supervised
when viewing these images.
Photosensitive Seizure Warning and Other Health Risks
Some viewers may experience an epileptic seizure or stroke when
exposed to certain ashing images or lights contained in certain
Projector pictures or video games. If you suer from, or have a
family history of epilepsy or strokes, please consult with a medical
specialist before using the 3D function.
Even those without a personal or family history of epilepsy or
stroke may have an undiagnosed condition that can cause
photosensitive epileptic seizures.
5English
Usage Notice
Pregnant women, the elderly, suerers of serious medical
conditions, those who are sleep deprived or under the inuence of
alcohol should avoid utilizing the unit’s 3D functionality.
If you experience any of the following symptoms, stop viewing
3D pictures immediately and consult a medical specialist: (1)
altered vision; (2) light-headedness; (3) dizziness; (4) involuntary
movements such as eye or muscle twitching; (5) confusion; (6)
nausea; (7) loss of awareness; (8) convulsions; (9) cramps; and/
or (10) disorientation. Children and teenagers may be more
likely than adults to experience these symptoms. Parents should
monitor their children and ask whether they are experiencing
these symptoms.
Watching 3D projection may also cause motion sickness,
perceptual after eects, disorientation, eye strain and decreased
postural stability. It is recommended that users take frequent
breaks to lessen the potential of these eects. If your eyes
show signs of fatigue or dryness or if you have any of the above
symptoms, immediately discontinue use of this device and do not
resume using it for at least thirty minutes after the symptoms have
subsided.
Watching 3D projection while sitting too close to the screen for
an extended period of time may damage your eyesight. The
ideal viewing distance should be at least three times the screen
height. It is recommended that the viewer’s eyes are level with the
screen.
Watching 3D projection while wearing 3D glasses for an extended
period of time may cause a headache or fatigue. If you experience
a headache, fatigue or dizziness, stop viewing the 3D projection
and rest.
Do not use the 3D glasses for any other purpose than for
watching 3D projection. Wearing the 3D glasses for any other
purpose (as general spectacles, sunglasses, protective goggles,
etc.) may be physically harmful to you and may weaken your
eyesight.
Viewing in 3D projection may cause disorientation for some
viewers. Accordingly, DO NOT place your 3D PROJECTOR near
open stairwells, cables, balconies, or other objects that can be
tripped over, run into, knocked down, broken or fallen over.
6
English
Usage Notice
▀■Avoid staring/facing directly into the projector beam at all
times. Keep your back to the beam as much as possible.
▀■When projector is used in a classroom, adequately supervise
students when they are asked to point out something on the
screen.
▀■In order to minimize the lamp power, use room blinds to
reduce ambient light levels.
Eye Safety Warnings
7English
Introduction
Unpack and inspect the box contents to ensure all parts listed
below are in the box. If something is missing, please contact
InFocus customer service.
Package Overview
Standard Accessories
CD User Manual
Quick Start Card
Projector Power Lead Documentation
VGA
Ent er
Menu Zoom
Remote HDMI Cable
8
English
Introduction
Product Overview
Main Unit
Do not block
projector in/out air
vents.
1. Lens
2. IR Receivers
3. Keypad
4. Input / Output
Connections
5. Power Socket
6. Tilt-Adjustment Feet
7. Speaker
8. Zoom Lever
9. Focus Ring
10. Lamp Cover
11. Ventilation (inlet)
12. Ventilation (outlet)
13. KensingtonTM Lock Port
7
6
9
810 12
11
613
1 32 54
9English
Introduction
Keypad
11
1 3
10
5
1. Source
2. Enter
3. Keystone Correction
4. Re-Sync
5. Menu
6. Help
7. Lamp LED
8. On/Standby LED
9. Power
10. Temperature LED
11. Four Directional Select Keys
6
7
2 4
8 9
10
English
Introduction
Input/Output Connections
AUDIO-OUT 12V OUT Out (5V)
3D SYNC
HDMI 1
HDMI 2
USB
1. 12V Relay Trigger (12V, 250mA, 3.5mm mini jack)
2. 3D Sync Out (5V) connector
3. HDMI 1 connector
4. Security Bar
5. Audio Out connector (3.5mm mini jack)
6. HDMI 2 connector
7. USB-B mini connector (Firmware upgrade)
8. Power Socket
2 31
4 7 86
5
Remote mouse
requires special
remote.
Table of contents
Other InFocus Projector manuals
InFocus
InFocus SP7205 User manual
InFocus
InFocus Projectors User manual
InFocus
InFocus LP 600 Manual
InFocus
InFocus sp1080 User manual
InFocus
InFocus ScreenPlay 4800 User manual
InFocus
InFocus LP 120 User manual
InFocus
InFocus SP4800 User manual
InFocus
InFocus IN24+EP User manual
InFocus
InFocus IN5132 User manual
InFocus
InFocus IN5534 User manual
InFocus
InFocus LASER PROJECTOR LP 540 User manual
InFocus
InFocus IN5312 User manual
InFocus
InFocus X3 User manual
InFocus
InFocus X1 User manual
InFocus
InFocus SP4805 Specification sheet
InFocus
InFocus SplashX User manual
InFocus
InFocus IN32 User manual
InFocus
InFocus X1a User manual
InFocus
InFocus LP 70+ User manual
InFocus
InFocus IN1110 User manual
