Infinity NV22 User manual
Owner’s Guide
Manual del usuario
Guide d’utilisation
NV22 |NV22C |NV22P |NV22T
English
Contents
Thank you for
purchasing the
Infinity Upright
Vacuum.
Important Safety Instructions 2
Getting Started 4
Using the Vacuum 6
Transporting the Vacuum 7
Cleaning with the Vacuum Accessories 8
Emptying the Dust Cup Assembly 10
Proper Care of Your Infinity Upright Vacuum 11
Troubleshooting 12
Checking for Blockages 13
Maintenance 14
Warranty and Registration 16
www.infinityvac.com 1
TOLL FREE: 1-888-668-9600
2TOLL FREE: 1-888-668-9600
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS For Household Use Only
General Electrical Safety:
Unplug from electrical outlet when not in use and before servicing.
DO NOT use vacuum with a damaged cord or plug.
DO NOT pull or carry vacuum by the cord.
DO NOT unplug by pulling on cord; to unplug, grasp the plug, not the cord.
DO NOT handle plug or vacuum cleaner with wet hands.
DO NOT run the vacuum over the power cord.
DO NOT use the cord as a handle.
DO NOT close a door on the cord.
DO NOT pull cord around sharp corners.
DO NOT leave appliance when plugged in.
Keep cord away from heated surfaces.
Turn off all controls before plugging or unplugging vacuum cleaner.
Hose Attachments:
DO NOT use if air flow is restricted; if the air paths, the hose or the extension
tube become blocked, turn the vacuum cleaner off. Remove all obstructions
before you turn on the unit again.
Keep the end of the hose, wands and other openings away from face and body.
Keep rotating brush and suction openings away from hair, face, fingers,
uncovered feet or loose clothing.
Only use manufacturer’s recommended attachments.
General Use:
Use only as described in this manual.
DO NOT put any objects into openings.
Keep your work area well lit.
Keep the vacuum moving over the carpet surface at all times to avoid damaging
the carpet fibers.
DO NOT place vacuum on unstable surfaces such as chairs or tables.
DO NOT allow young children to operate the vacuum or use as a toy.
DO NOT use vacuum cleaner if it has been dropped, damaged, left outdoors or
submerged in water. Return to EURO-PRO Operating LLC for examination, repair
or adjustment.
When using an electrical appliance, basic
safety precautions should always be
observed, including the following:
READ ALL INSTRUCTIONS BEFORE
USING YOUR INFINITY UPRIGHT
VACUUM.
WARNING:
To reduce the risk of electric shock,
the two-pronged power cord plug
is polarized [one prong is larger
than the other]; it will fit into the
outlet only one way. DO NOT
force into outlet or try to modify
to fit.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK OR INJURY.
DO NOT USE OUTDOORS OR ON WET SURFACES:
3www.infinityvac.com
English
Cyclonic Chamber/Dust Cup/Filters:
Before turning on the vacuum:
• Make sure that dust cup, cyclonic chamber and all filters are in place after
routine maintenance.
• Make sure that all components and filters are thoroughly dry after routine
cleaning.
• Only use filters and accessories provided by EURO-PRO Operating LLC
[Failure to do so will void the warranty.]
General Cleaning:
DO NOT run the vacuum over large-sized objects.
DO NOT pick up hard or sharp objects such as glass, nails, screws or coins that
could damage the vacuum cleaner.
DO NOT pick up smoking or burning objects such as hot coals, cigarette butts or
matches.
DO NOT pick up flammable or combustible materials such as lighter fluid,
gasoline, kerosene or use in areas where they may be present.
DO NOT pick up toxic solutions such as chlorine bleach, ammonia or drain
cleaner.
DO NOT use in an enclosed space where vapors are present from paint, paint
thinner, moth-proofing substances, flammable dust or other explosive or toxic
materials.
DO NOT vacuum up any liquids.
DO NOT immerse vacuum cleaner in water or other liquids.
DO NOT use outdoors or on wet surfaces; use only on dry surfaces.
Use extra care when cleaning on stairs.
4TOLL FREE: 1-888-668-9600
Along with your upright unit, you will
find the following components:
aHandle Assembly
bCleaning Attachments
cExtra Filters
dSuper Stretch Hose
eFloor Power Nozzle
fVacuum Body
gCleaning Wand
*
Note: models NV22C ,NV22P and NV22T include
the optional Pet Hair Power Brush (
h
). NV22T and
NV22P include the optional extra 24" crevice tool
(
i
).These tools can be stored in separate accessory
bag. Optional tools are available for sale for
any NV22 model: 1-888-668-9600.
Your Infinity Upright is easy
to assemble:
1Lay your vacuum body on a level
surface.
2Slide the electrical connection from
the power nozzle into the main body
to click into place.
3Connect the hose from the main
body to the power nozzle; push with
a slight turning motion to create
a snug fit.
4Slide the handle assembly into the
upright unit aligning the hose hook
on the handle assembly with the
power cord hooks on the back of
the unit.
5Secure the handle assembly in place
with included nut/bolt (shipped
attached to handle assembly).
6Place the vacuum in the upright
position.
7Store the Crevice Tool, Dusting
Brush and Cleaning Wand on
the unit.
Getting Started
g
h
i
2
3
4
5
7
5www.infinityvac.com
English
8Attach each end of the Super Stretch
Hose to the vacuum, routing the
hose around the anti-tip hose hook
and the hose holder on the handle
assembly.
IMPORTANT:
To prevent vacuum
from tipping, secure
hose under the
anti-tip hose hook.
IMPORTANT:
For suction to reach the Floor Power
Nozzle, the Cleaning Wand and
Super Stretch Hose must be attached
securely on the vacuum body.
9When storing your vacuum, wind
cord around the two cord holders
and secure with cord clip:
•Quick Cord release at the top of
the unit – place in the upright
position.
•Second holder near the base –
turn until it is pointing down.
To release the cord, turn the Quick
Cord release to the left or right.
8
9
6TOLL FREE: 1-888-668-9600
1
Carpets
Bare Floors / Tools
4
Off
Indicator Light
Using the Vacuum
1Start with the Power Switch in the
“O Off” position.
2Place your foot on the Floor Power
Nozzle and pull handle towards you.
3Set the Power Switch to desired
cleaning setting.
Your Infinity Upright Vacuum is a versatile
tool that can be used to clean bare floor
surfaces or carpets – with the click of
a switch.
Stand the vacuum into the upright position.
Plug in the vacuum.
4When cleaning bare floors:
Select the “IOn” position for
suction only cleaning to avoid
scattering dirt while cleaning.
When cleaning carpets:
Ensure you have pulled the handle
towards you and select the
“II Brush Roll On” position to
agitate the carpet fibers for
deeper cleaning performance.
IMPORTANT: To protect your
carpets, the Brush Roll will only turn
on when you have pulled the handle
towards you and released the Floor
Power Nozzle.
IMPORTANT: Your Brush Roll
Indicator Light will illuminate solid
green when brush roll is on,
or solid red if there is a
blockage. This feature is designed
to protect your Lifetime Belt that
powers your Brush Roll. See
Checking for Blockages
on page 13.
7www.infinityvac.com
English
1
2
Transporting the Vacuum
NOTE: The height of your power
nozzle has been optimized for easy
pushing and superior cleaning on
all floor types, so there is no need
to make any height adjustments
as you transition to different floor
& carpet types.
1To roll the vacuum:
Hold the handle from either
direction, and tilt unit back
on wheels.
2To carry the vacuum:
With the unit in the standing
position, lift by the Dust Cup
Assembly Handle (carry handle).
CAUTION:
When lifting or carrying,
DO NOT press Dust Cup
Assembly release button.
Stand the vacuum into the upright position.
Unplug the vacuum.
Wind cord around the two cord holders.
Secure Super Stretch Hose in place.
8TOLL FREE: 1-888-668-9600
Cleaning with the Vacuum Accessories
Before cleaning with your accessories:
Stand vacuum into upright position.
Secure Super Stretch Hose in the anti-tip
hose hook to prevent tipping.
Select the “IOn” position for
suction only cleaning.
DO NOT pull vacuum cleaner
around by the hose.
DO NOT overextend the hose.
Vacuum Accessories
Your vacuum comes with a Super Stretch
Hose and Cleaning Wand. Use one or
the other to attach your cleaning
accessories.
Crevice Tool – this tool is used for
cleaning between cushions, under
radiators and baseboards, or hard-
to-reach crevices and corners.
Dusting Brush – this tool is used to dust a variety of surfaces from
furniture and window blinds to lamp shades and book shelves, as well
as remove dirt and pet hair from upholstery surfaces and stairs.
1Using the Super Stretch Hose:
Stand the vacuum into upright
position.
Remove the hose from the
Cleaning Wand.
Push the selected tool into the
hose connector.
IMPORTANT:
To prevent vacuum
from tipping, secure
hose under the
anti-tip hose hook.
1
9www.infinityvac.com
English
2Using the Cleaning Wand:
Stand the vacuum into upright
position.
Remove the Cleaning Wand (with
hose attached) from the unit.
Push the selected tool into the end
of the Cleaning Wand.
*
Note: for models NV22C / NV22P / NV22T, your Infinity comes with a Pet Hair Power
Brush that is kept in a separate accessory bag.
Pet Hair Power Brush – this unique tool has dual felt strips
along the cleaning surface that are designed for heavy-duty pet
hair removal from carpeted stairs and upholstery.
*
Note: for model NV22T, your Infinity comes with an extra 24” crevice tool.
24” Crevice Tool – allows you to reach deep into narrow
cleaning spaces.
To order additional parts and accessories, go to
www.infinityvac.com or call 1-888-668-9600.
Note: some
parts may be available at your local Infinity retailer.
2
This manual suits for next models
3
Table of contents
Languages:
Other Infinity Vacuum Cleaner manuals
Infinity
Infinity Infinity BG1 Silence User manual
Infinity
Infinity NV30CN User manual
Infinity
Infinity NV31 User manual
Infinity
Infinity NV31W User manual
Infinity
Infinity NV30CN User manual
Infinity
Infinity NV29 User manual
Infinity
Infinity V12 User manual
Infinity
Infinity NV22Q User manual
Infinity
Infinity NV29 User manual
