Infineon AIROC CYW20829 User manual

Quick start guide

AIROC™CYW20829 Bluetooth®LE SoC Evaluation Kit

CYW920829M2EVK-02

www.infineon.com/CYW920829M2EVK-02

Kit contents

1. CYW20829 Evaluation Board (CYW9BTM2BASE3+CYW920829M2IPA2)

2. USB Type-A to Micro-B cable

3. Six jumper wires (five inches each)

4. Quick start guide (this document)

Quick start guide

Before you start

1. Ensure that you have the following:

• PC with USB 2.0 port

• UART terminal soware such as

Tera Term or Minicom

• Download and install the AIROC™ Bluetooth®

Connect app from Play Store or iOS App Store.

2. Visit the kit website to download and

install the required soware.

3. Ensure the following jumper settings to select 3.3 V:

5. Wait for the driver installation to complete.

6. Open the UART terminal soware and set the

USB-UART COM port terminal setting by referring

to COM port setup image.

4. Connect the KitProg3 USB connector (J5)

to your PC.

USB cable connected to the

KitProg3 USB connector

Jumper

J10

J12

1 – 3

1 – 2

Position

Run the AIROC™Bluetooth®Connect application

1. Turn ON Bluetooth® on your Android or iOS device.

2. Launch the AIROC™Bluetooth®Connect app.

3. Press the reset switch on the CYW920829M2EVK-02

board to start sending advertisements and observe

the “Advertisement started” message on the serial

terminal and confirm USER LED2 blinking.

4. Swipe down on the AIROC™Bluetooth®Connect app

home screen to start scanning for LE Peripheral

devices.

5. Your device (“Find Me Target”) appears on the

home screen. Tap Connect to establish a Bluetooth®

LE connection with the device.

6. The USER LED2 changes from blinking state to

always ON state aer establishing a successful

connection with the device.

7. Select ‘Find Me Profile’ and select an Alert level.

The USER LED1 state is linked to the type of

alert sent.

• No alert: USER LED1 OFF

• Mild alert: USER LED1 blinking

• High alert: USER LED1 ON

AIROC™Bluetooth®Connect app – Android

AIROC™Bluetooth®Connect app – iOS

USB-UART COM port setup

Quick start guide

1. Power LED (LED1)

2. KitProg3 USB Micro-B connector (J5)

3. KitProg3 programming mode selection button (SW3)

4. KitProg3 (PSoC™ 5LP) programmer

and debugger (CY8C5868LTI - LP039, U5)

5. VBAT voltage selection jumper (J9)

6. VIO_BASE voltage selection jumper (J10)

7. VDDPA voltage selection jumper (J12)

8. Analog mic (U13)**

9. Power header compatible with

Arduino Uno R3 (J1)

10. Reset button (SW1)

11. 10-pin MCU PROG/DEBUG header (J11)

12. Analog header compatible with

Arduino (J2)

13. User Button 1 (SW2)

14. Digital mic (U11)**

15. User Button 2 (SW4)

16. User LED 1 (LED3)

17. User LED 2 (LED4)

18. M.2 stand-oﬀ (MT1)

19. AIROC™ CYW20829 Bluetooth® and

Bluetooth® LE system on chip

20. M.2 E-key interface connector (J16)

21. RGB LED (LED5)

22. Thermistor (TH1)

23. Thermistor enable header (J14)

24. Peripheral enable header (J13)

25. VDDIO current measurement header (J17)

26. Six-axis IMU (U12)

27. QSPI flash memory (U14)*

28. Digital I/O headers compatible

with Arduino Uno R3 (J3, J4)

29. Extended GPIO header (J18)

30. KitProg3 status LED (LED2)

AIROC™CYW20829 Evaluation Board details

89 10 11 12 13 14

252627282930

*Footprint only, not populated on the board

**Component is located at the bottom side of the board

See the kit guide available at www.infineon.com/CYW920829M2EVK-02 for details.

Published by

Infineon Technologies AG

81726 Munich, Germany

Please note! Additional information

For further information on technologies, our products, the

application of our products, delivery terms and conditions

and/or prices, please contact your nearest Infineon Technologies

oﬀice (www.infineon.com).

Warnings

Due to technical requirements, our products may contain

dangerous substances. For information on the types in question,

please contact your nearest Infineon Technologies oﬀice.

Except as otherwise explicitly approved by us in a written

document signed by authorized representatives of Infineon

Technologies, our products may not be used in any life-

endangering applications, including but not limited to medical,

nuclear, military, life-critical or any other applications where a

failure of the product or any consequences of the use thereof

can result in personal injury.

www.infineon.com

Document Number: 002-37204 Rev. *A

Date: 08/ 2023

Quick start guide

VIO/IOREF

RST/RESET

V3.3/V3.3

V5.0/V5.0

GND/GND

NC/VIN

AIROC™CYW20829 Evaluation Board pinout details

This Document is for information purposes only and any

information given herein shall in no event be regarded as a

warranty, guarantee or description of any functionality,

conditions and/or quality of our products or any suitability

for a particular purpose. With regard to the technical

specifications of our products, we kindly ask you to refer

to the relevant product data sheets provided by us.

Our customers and their technical departments are

required to evaluate the suitability of our products

for the intended application.

We reserve the right to change this document and/or

the information given herein at any time.

P4.0/SCL

P4.1/SDA

GND/GND

P1.1/D13

P1.3/D12

P1.2/D11

P1.0/D10

P1.6/D9

P1.5/D8

GND

P3.1

P3.0

P0.4

P0.3

P0.2

P0.5

P5.2

P1.1

P0.1/D7

P0.0/D6

P1.2/D5

P1.3/D4

P1.0/D3

P1.4/D2

P3.3/D1

P3.2/D0

P3.4/A0

P3.5/A1

P3.6/A2

P3.7/A3

P0.0/A4

P0.1/A5

P5.0/A6

P5.1/A7

Legend I/Os compatible with Arduino Uno R3 CYW20829 I/Os

Other manuals for AIROC CYW20829

This manual suits for next models

Other Infineon Microcontroller manuals

Infineon

Infineon XMC4000 series User manual

Infineon

Infineon XDPL8220 User manual

Infineon

Infineon XMC4000 series User manual

Infineon

Infineon XMC4000 series User manual

Infineon

Infineon CY4613 User manual

Infineon

Infineon PSoC 6 User manual

Infineon

Infineon Cypress PSoC CY8CKIT-147 User manual

Infineon

Infineon XC800 Series User manual

Infineon

Infineon XC164CM Series User manual

Infineon

Infineon TRAVEO T2G Product manual

Infineon

Infineon TC2X5 User manual

Infineon

Infineon XC2236N User manual

Infineon

Infineon EZ-PD PMG1 User manual

Infineon

Infineon EVAL-M3-302FTOBO1 User manual

Infineon

Infineon XC800 Series User manual

Infineon

Infineon XE166 Series User manual

Infineon

Infineon XMC7000 Series Guide

Infineon

Infineon FX3 EZ-USB DEMO_FX3_LVDS_CAM01 User manual

Infineon

Infineon TC2X4 User manual

Infineon

Infineon XC164 Series Installation and operating instructions

Infineon

Infineon PSoC 4100S Max pioneer kit User manual

Infineon

Infineon PSoC 6 User manual

Infineon

Infineon TriBoard TC176X User manual

Infineon

Infineon AIROC CYW20829 User manual

Popular Microcontroller manuals by other brands

AMS

AMS AS7261 Demo Kit user guide

Novatek

Novatek NT6861 manual

Espressif Systems

Espressif Systems ESP8266 SDK AT Instruction Set

Nuvoton

Nuvoton ISD61S00 ChipCorder Design guide

STMicrolectronics

STMicrolectronics ST7 Assembler Linker user manual

Texas Instruments

Texas Instruments Chipcon CC2420DK user manual

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM user guide

NEC

NEC 78GK0S/K 1+ Series Application note

Mikroe

Mikroe SEMITECH N-PLC Click Application note

Intel

Intel Agilex user guide

Cypress

Cypress CY4607 HX2VL quick start guide

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE manual

Texas Instruments

Texas Instruments TMS320F2837 D Series Workshop Guide and Lab Manual

CYPRES

CYPRES CY14NVSRAMKIT-001 user guide

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM user guide

Espressif Systems

Espressif Systems ESP8266EX Programming guide

Abov

Abov AC33M8128L user manual

Laird

Laird BL654PA user guide