Infineon TLD7002-16SHIELD User manual

TLD7002-16SHIELD

User guide

Z8F80318869

About this document

Scope and purpose

The TLD7002-16SHIELD is an LED driver shield compatible with Arduino UNO. The TLD7002-16ES is a 16

independent-channel-LED driver with individual output current from 5 mA to 76 mA and UART over CAN

interface.

The scope of this user manual is to provide instructions on use of the TLD7002-16SHIELD for a jump-start on the

TLD7002-16ES programming with the simple Arduino IDE.

This user guide describes the TLD7002-16SHIELD with PCB version P03 and P04 in which, only thermal vias are

changed. Additionally, schematic version S03 is described.

This board will be used during design-in, for evaluation and proof of concepts for new projects adopting the

TLD7002-16ES.

Figure 1 TLD7002-16SHIELD

Intended audience

Hardware engineers and soware engineers

User guide Please read the sections "Important notice" and "Warnings" at the end of this document Rev.1.00

www.infineon.com 2022-07-26

Table of contents

About this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.1 UART over CAN interface connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.2 TLD7002-16ES Power supply options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2 Quick start procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2.1 OTP configuration array and OTP wizard tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

4 Bill of material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

5 PCB layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

6 Schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

TLD7002-16SHIELD

User guide

Table of contents

User guide 2 Rev.1.00

2022-07-26

1 Description

The core of the shields is the TLD7002-16ES which features:

• Output current up to 16 x 76.5 mA

• UART over CAN interface up to 2 Mbit/s compliant with ISO11898-2 (2016) CAN physical layer

• 16 independent 14-bit PWM engines from 100 Hz up to 2 kHz

• Integrated diagnostics for load monitoring and device fault monitor

• ISO26262 compliant development up to ASIL B

The only needed connection from Arduino to drive 16 mid power LEDs is an UART interface and optionally the

TLD7002-16ES GPIN0 pin, which acts as a chip-select during the TLD7002-16ES one time programmable (OTP)

memory programming/emulation.

1.1 UART over CAN interface connections

The TLD7002-16ES has an UART over CAN physical layer interface called HSLI (High Speed Lighting Interface)

which is a dierential BUS. The HSLIL output pin it is an open drain with a diode in series, and it can be

connected directly to a standard UART with a simple workaround without the need for a transceiver. The

resulting logic levels on the RX and TX pins are not CMOS or TTL compliant, and they will have slightly reduced

noise margin compared to standard CMOS gates.

µC

UART TX

UART RX

HSLIH

HSLIL

HSLIH

HSLIL

HSLIH

HSLIL

U1 TLD7002-16ES

CBUS

RTX = 1k

2.5 V

40k typ

RUP

RDN

3k3

2.5V

2.5V 2.5V

U2 TLD7002-16ES

U3 TLD7002-16ES

Figure 2 TLD7002-16ES direct UART connection

Arduino has an internal pull up on the RX pin therefore, instead of the resistor on the TX pin, a diode is placed

on the TX pin. See Figure 3.

TLD7002-16SHIELD

User guide

1 Description

User guide 3 Rev.1.00

2022-07-26

GPIN0

HSLI-L

µC(HW)RX

µC(SW)TX

GND

TLD7002-16

Figure 3 TLD7002-16SHIELD HSLI interface and GPIN0 connections

The TLD7002-16ES UART has a 200 kbps minimum speed. In order to have the serial monitor prints available for

debugging, the TLD7002-16ES has been connected to a so serial port for the Arduino TX, and a hardware serial

port for the Arduino RX signal. UART speed has been set to a standard 230400 bps.

This so/hard serial division is needed because the so serial cannot handle 230 kbps in reception, and

therefore it is not possible to have both so serial for TX and RX connected to TLD7002-16ES UART. The so

serial library has been slightly modified in order to handle the 230 kbps with reduced delay on adjacent bytes.

The Arduino UNO can be programmed even if the TLD7002-16SHIELD is plugged into the Arduino.

1.2 TLD7002-16ES Power supply options

The TLD7002-16ES applications has 2 supply rails:

•VSto power TLD7002-16ES device (VS pin, 6 V to 20 V functional range)

•VLED to power the LEDs

Since its outputs are linear current sources, when possible is better to keep VLED voltage close to the LED load

voltage plus the TLD7002-16ES dropout, to limit the power dissipation on the LED driver. Since the load is only

1 LED per output, the recommended VLED is approximately 4 V, while the VSmust be higher than 6 V.

In order to avoid 2 power supplies connected to the TLD7002-16ES shield, and to supply the board directly by

the Arduino USB, a charge pump has been designed on Arduino pin 9 and 10. The power supply connections are

illustrated below.

TLD7002-16SHIELD

User guide

1 Description

User guide 4 Rev.1.00

2022-07-26

Arduino

5V pin

D9_PWM

NXP_BAT46WJ5V_ARDUINO

NXP_BAT46WJ

GND

4.7uF 25V 0805

D10_PWM

470nF 25V 0603

D10

Arduino

USB

VS≈9V

charge pump

Arduino sch.

5V USB protection circuit

VLED

Arduino sch.

5V from Vin regulator

JVLED

Jumper

VS_REV

5V_REV

5V_arduino

Figure 4 TLD7002-16SHIELD power supply connections with Arduino UNO R3

The TLD7002-16ES output currents can be as high as 76.5 mA per channel, for a total current of 1224 mA in case

all outputs are on @100% duty. The current setting on the TLD7002-16ES outputs must be adjusted in order to

avoid damages to the Arduino UNO circuitry.

In the provided sketch, the LED current has been set to 20 mA for a total LED current of 320 mA.

The board can be powered in several ways:

• Arduino USB B connector

- Keep total LED current below 400 mA to avoid damages to Arduino T1 transistor, see Figure 4

• Powering the Arduino VIN port with 7 V to keep power on the Arduino LDO (IC2) low

- Keep total LED current below 400 mA

• Providing external 5 V to the Arduino 5V_REV test point with an external power supply

- Keep total LED current below 800 mA to avoid damages to D5 and D3

- Do not exceed 5.5 V or the the Arduino UNO board will be damaged

• Powering the Arduino with one power supply (Either at VIN or USB) while VLED is powered by an external

power supply (4 V to 6 V is recommended). Remove JVLED Jumper for this option

- Total LED current can go up to 1224 mA

TLD7002-16SHIELD

User guide

1 Description

User guide 5 Rev.1.00

2022-07-26

2 Quick start procedure

A step-by-step procedure is laid out for setting up and running the shield.

1. Download the TLD7002SHIELD_DEMO sketch from the TLD7002SHIELD webpage

2. Plug the TLD7002SHIELD on the Arduino UNO board

3. Connect the TLD7002SHIELD to the PC with a USB cable

4. Download and open the Arduino IDE [1]

5. Select the correct COM PORT on the Tools > Port menu

6. Upload the TLD7002SHIELD_DEMO sketch in the Arduino UNO

7. Press BUTTON on TLD7002-16SHIELD to change the animation

8. Optional: open Tools > Serial Monitor and set the speed to 230400 bps to see diagnostic printf

Figure 5 TLD7002-16SHIELD plugged in the Arduino UNO with USB cable

The TLD7002-16SHIELD is equipped with eicient white LEDs, therefore in order to keep the glare low, a duty

cycle is set to 10% on the TLD7002-16DEMO sketch V.1.0. The brightness can be easily increased by modifying

the provided sketch.

2.1 OTP configuration array and OTP wizard tool

The TLD7002-16SHIELD is assembled with a TLD7002-16ES device with unwritten OTP.

The TLD7002SHIELD_DEMO sketch V.1 initialize the TLD7002-16ES device by emulating the LED driver OTP with

a hard-coded configuration array:

const uint16 OTP_hex_cfg[] = {0x0000, 0x0000, 0x0000, 0x0000, 0x4D4D...};

This is needed because the TLD7002-16ES cannot be in ACTIVE mode if the OTP has not been written or

emulated.

A dierent configuration array can be easily generated by the OTP wizard tool. The OTP wizard is a GUI/tool

used to easily configure the OTP memory of the TLD7002-16ES device.

The OTP configuration array is prepared in advance. This can be easily achieved by clicking save configuration

in the OTP wizard tool. The configuration array is located at the end of the .ocfg saved file: in the

HEX_DATA_16BIT field. The file is of txt format and can be opened with a text editor.

TLD7002-16SHIELD

User guide

2 Quick start procedure

User guide 6 Rev.1.00

2022-07-26

The OTP wizard GUI is installed via the Infineon Developer Center Launcher (IDC) [2] following one of the 2

installation paths:

Infineon Developer Center [3]: online repository listing all available tools, soware and services

Launcher [4]: oline utility to manage and update all tools aer downloading from the IDC online repository

Once IDC is installed, run it and click on Manage Tools.

Figure 6 Manage Tools

Then search for OTP Wizard (point 1) and click on Install (point 2).

Figure 7 Searching Tools

Once OTP wizard installation has completed, select My Tools tab (point 3) in Infineon Toolbox, then click on

Start (point 4) in OTP Wizard to start the tool.

Figure 8 Starting the OTP Wizard GUI

TLD7002-16SHIELD

User guide

2 Quick start procedure

User guide 7 Rev.1.00

2022-07-26

3 Electrical characteristics

Table 1 Electrical characteristics

Parameter Symbol Values Unit Note or test condition

Min. Typ. Max.

Input voltage VIN_5V 4.5 5 5.5 V VIN_5V is directly connected to

Arduino 5 V, voltage higher than 5.5 V

will damage your Arduino UNO

Input current IIN_5V 50 470 1300 mA TLD7002SHIELD_DEMO sketch sets

OUT current to 25 mA per channel.

If duty cycle is modified to 100%

and all outputs are ON, then the 5 V

current will be approximately 470 mA

LED power supply VLED 4.5 – 35 V VLED can be as low as 0 V if JVLED

jumper is open and JVLED resistor

not populated

TLD7002-16ES power

supply

VS6 – 20 V –

Output voltage VOUT_n 0 – 20 V Diagnostic setting has to be adapted

in the OTP configuration file for the

shield to be used with dierent loads

Output current IOUT_n 5.6 – 76.5 mA TLD7002SHIELD_DEMO V1 is set to

25 mA

PWM frequency fPWM 99.9 – 1997 Hz –

The input current on the TLD7002-16SHIELD is equal to the sum of all of the following:

• The LED currents multiplied by their duty cycle

• The TLD7002-16ES supply current (VS pin) multiplied by 2, due to the charge pump

• The Arduino UNO supply current

In the provided sketch the output current is set to 20 mA per channel, if duty cycle is set to 100% and all outputs

are ON, the current consumption would be approximately:

I5V_REF =IOUT_n⋅16 +IV S_typ +IArduinoUNO_typ =25mA ⋅16 +15mA ⋅2+40mA =470mA (1)

TLD7002-16SHIELD

User guide

3 Electrical characteristics

User guide 8 Rev.1.00

2022-07-26

4 Bill of material

Table 2 Bill of material

Designator Description Footprint Quantity

5V, GND3, GND4, GPIO0, GPIO1, HSLI-H,

HSLI-L, VDD, VLED, VS, VS_REV

NO_POP_KEYSTONE 5117-1 TESTPAD KEYSTONE

5117-1

AD NO_POP_Head 6 STRIP 6V P2.54 MD 1

BUTTON PTS636 SK25F SMTR LFS PULS 6,1X3,5 SMD C&K

PTS636 F

C1, C2, C6 4.7uF 25V 0805 C0805 3

C3, C4, C7 470nF 25V 0603 C0603 3

C5 100nF 16V 0603 C0603 1

COUT0, COUT1, COUT2, COUT3, COUT4,

COUT5, COUT6, COUT7, COUT8, COUT9,

COUT10, COUT11, COUT12, COUT13,

COUT14, COUT15

10nF C0603 16

D1, D2, D3, D4, D5, D6 BAS3010A-03W SOD323F 6

DA0, DA1, DA2, DA3, DA4, DA5, DA6, DA7,

DA8, DA9, DA10, DA11, DA12, DA13, DA14,

DA15

JB2835AWT-W-H30 LED SMD 2835 CREE

JE2835AWTE

IOH NO_POP_Head 10 STRIP 10V P2.54 MD 1

IOL, POWER NO_POP_Head 8 STRIP P2.54 2

J0, J1, J2, J3, J4, J5, J6, J7, J8, J9, J10,

J11, J12, J13, J14, J15, JVLED

0R 0603 17

JBUT NO_POP TSW-102-08-G-S STRIP P2.54 1

NTC1 Mitsubishi TD11-3H103F

NTC(0603 10K 3370K)

R0603 1

R1 10k 1% 0603 R0603 1

R2, R3, R4, R5 4k7 1% 0603 R0603 4

U1 TLD7002-16ES PG-TSDSO-24 1

TLD7002-16SHIELD

User guide

4 Bill of material

User guide 9 Rev.1.00

2022-07-26

5 PCB layout

TLD7002-16SHIELD

P04

NTC divider

GND

LED DRIVER

3V3

CHARGE PUMP

13 70

G5V

REF

Vin 0

JBUT

BUTTON 5V

DA10

JVLED

J15

J14

J13

J12

J11

J10

VDD

5V_REV

COUT15

COUT14

COUT13

COUT12

COUT11

COUT10

COUT9

COUT8

COUT7

COUT6

COUT5

COUT4

COUT3

COUT2

COUT1

COUT0

VS_REV

VLED

NTC1

HSLI-L

HSLI-H

GPIO1

GPIO0

DA15DA14DA13DA12

DA11

DA9DA8

DA7DA6DA5DA4

DA3DA2DA1DA0

POWER

IOL

IOH

PA5V01

CO5V

PA5V0REV01

CO5V0REV

PAAD03

PAAD04

PAAD05

PAAD06 PAAD02 PAAD01

COAD

PABUTTON01

PABUTTON02

COBUTTON

PAC101

PAC102

COC1

PAC201

PAC202

COC2

PAC302 PAC301

COC3

PAC401

PAC402

COC4

PAC502 PAC501

COC5

PAC602

PAC601

COC6

PAC701

PAC702

COC7

PACOUT001

PACOUT002

COCOUT0

PACOUT102 PACOUT101

COCOUT1

PACOUT201

PACOUT202

COCOUT2

PACOUT302 PACOUT301

COCOUT3

PACOUT401

PACOUT402

COCOUT4

PACOUT502 PACOUT501

COCOUT5

PACOUT601

PACOUT602

COCOUT6

PACOUT702 PACOUT701

COCOUT7

PACOUT801

PACOUT802

COCOUT8

PACOUT902 PACOUT901

COCOUT9

PACOUT1001

PACOUT1002

COCOUT10

PACOUT1102 PACOUT1101

COCOUT11

PACOUT1201

PACOUT1202

COCOUT12

PACOUT1302 PACOUT1301

COCOUT13

PACOUT1401

PACOUT1402

COCOUT14

PACOUT1502 PACOUT1501

COCOUT15

PAD10A

PAD10K

COD1

PAD20K

PAD20A

COD2

PAD30A

PAD30K

COD3

PAD40K

PAD40A

COD4

PAD50A

PAD50K

COD5

PAD60K PAD60A

COD6

PADA00A

PADA00K

CODA0

PADA10A

PADA10K

CODA1

PADA20A

PADA20K

CODA2

PADA30A

PADA30K

CODA3

PADA40A

PADA40K

CODA4

PADA50A

PADA50K

CODA5

PADA60A

PADA60K

CODA6

PADA70A

PADA70K

CODA7

PADA80A

PADA80K

CODA8

PADA90A

PADA90K

CODA9

PADA100A

PADA100K

CODA10

PADA110A

PADA110K

CODA11

PADA120A

PADA120K

CODA12

PADA130A

PADA130K

CODA13

PADA140A

PADA140K

CODA14

PADA150A

PADA150K

CODA15

PAGND101

COGND1

PAGND201

COGND2

PAGND301

COGND3

PAGND401

COGND4

PAGND501

COGND5

PAGPIO001

COGPIO0

PAGPIO101

COGPIO1

PAHSLI0H01

COHSLI0H

PAHSLI0L01

COHSLI0L

PAIOH03 PAIOH04 PAIOH05 PAIOH06

PAIOH02

PAIOH01 PAIOH07 PAIOH08 PAIOH09

PAIOH010

COIOH

PAIOL08

PAIOL07

PAIOL01 PAIOL02 PAIOL06

PAIOL05

PAIOL04

PAIOL03

COIOL

PAJ002 PAJ001

COJ0

PAJ101

PAJ102

COJ1

PAJ202 PAJ201

COJ2

PAJ301

PAJ302

COJ3

PAJ402 PAJ401

COJ4

PAJ501

PAJ502

COJ5

PAJ602 PAJ601

COJ6

PAJ701

PAJ702

COJ7

PAJ802 PAJ801

COJ8

PAJ901

PAJ902

COJ9

PAJ1002 PAJ1001

COJ10

PAJ1101

PAJ1102

COJ11

PAJ1202 PAJ1201

COJ12

PAJ1301

PAJ1302

COJ13

PAJ1402 PAJ1401

COJ14

PAJ1501

PAJ1502

COJ15

PAJBUT01

PAJBUT02

COJBUT

PAJVLED02

PAJVLED01

COJVLED

COMK10

PANTC101

PANTC102

CONTC1

PAPOWER08 PAPOWER07 PAPOWER01

PAPOWER02

PAPOWER06 PAPOWER05 PAPOWER04 PAPOWER03

COPOWER

PAR102

PAR101

COR1

PAR201

PAR202

COR2

PAR302

PAR301

COR3

PAR402 PAR401

COR4

PAR502

PAR501

COR5

PAU10EP

PAU1020

PAU1019

PAU1018

PAU1017

PAU1016

PAU1015

PAU1014

PAU1013

PAU1012 PAU1010

PAU109 PAU108 PAU107 PAU106 PAU105 PAU104 PAU103 PAU102

PAU101

PAU1011

PAU1024

PAU1023

PAU1022

PAU1021

COU1

PAVDD01

COVDD

PAVLED01

COVLED

PAVS01

COVS

PAVS0REV01

COVS0REV

PA5V01

PAD20A

PAD30A

PAD50K

PAPOWER04

PABUTTON02

PAIOL03

PAJBUT01

PAC401

PAIOH09

PAC701

PAIOH08

PABUTTON01

PAC101

PAC201

PAC301

PAC501

PAC601

PAGND101

PAGND201

PAGND301

PAGND401

PAGND501

PAJBUT02

PANTC101

PAPOWER02

PAPOWER03

PAR401

PAU1022

PAU10EP

PAGPIO001

PAIOL01

PAU102

PAC502

PANTC102

PAR101

PAR501

PAU103

PAHSLI0H01

PAR201

PAR402

PAU1024

PAD10A

PAHSLI0L01

PAIOL08

PAU1023

PAC202

PAR102

PAR202

PAU101

PAVDD01

PA5V0REV01

PAD50A

PAC402

PAC702

PAD20K

PAD40A

PAD30K

PAJVLED02

PAD60A PAVS0REV01

PADA00K

PAJ002

PADA10K

PAJ102

PADA20K

PAJ202

PADA30K

PAJ302

PADA40K

PAJ402

PADA50K

PAJ502

PADA60K

PAJ602

PADA70K

PAJ702

PADA80K

PAJ802

PADA90K

PAJ902

PADA100K

PAJ1002

PADA110K

PAJ1102

PADA120K

PAJ1202

PADA130K

PAJ1302

PADA140K

PAJ1402

PADA150K

PAJ1502

PAGPIO101

PAR502

PAR302

PAU104

PACOUT002

PAJ001

PAU105

PACOUT102

PAJ101

PAU106

PACOUT202

PAJ201

PAU107

PACOUT302

PAJ301

PAU108

PACOUT402

PAJ401

PAU109

PACOUT502

PAJ501

PAU1010

PACOUT602

PAJ601

PAU1011

PACOUT702

PAJ701

PAU1012

PACOUT802

PAJ801

PAU1013

PACOUT902

PAJ901

PAU1014

PACOUT1002

PAJ1001

PAU1015

PACOUT1102

PAJ1101

PAU1016

PACOUT1202

PAJ1201

PAU1017

PACOUT1302

PAJ1301

PAU1018

PACOUT1402

PAJ1401

PAU1019

PACOUT1502

PAJ1501

PAU1020

PAD10K

PAIOL05

PAPOWER01

PAC102

PACOUT001

PACOUT101

PACOUT201

PACOUT301

PACOUT401

PACOUT501

PACOUT601

PACOUT701

PACOUT801

PACOUT901

PACOUT1001

PACOUT1101

PACOUT1201

PACOUT1301

PACOUT1401

PACOUT1501

PADA00A PADA10A PADA20A PADA30A

PADA40A PADA50A PADA60A PADA70A

PADA80A PADA90A

PADA100A PADA110A

PADA120A PADA130A PADA140A PADA150A

PAJVLED01

PAR301

PAVLED01

PAC302

PAC602

PAD40K

PAD60K

PAU1021

PAVS01

Figure 9 PCB layout top

PA5V01

CO5V

PA5V0REV01

CO5V0REV

PAAD03

PAAD04

PAAD05

PAAD06 PAAD02 PAAD01

COAD

PABUTTON01

PABUTTON02

COBUTTON

PAC101

PAC102

COC1

PAC201

PAC202

COC2

PAC302 PAC301

COC3

PAC401

PAC402

COC4

PAC502 PAC501

COC5

PAC602

PAC601

COC6

PAC701

PAC702

COC7

PACOUT001

PACOUT002

COCOUT0

PACOUT102 PACOUT101

COCOUT1

PACOUT201

PACOUT202

COCOUT2

PACOUT302 PACOUT301

COCOUT3

PACOUT401

PACOUT402

COCOUT4

PACOUT502 PACOUT501

COCOUT5

PACOUT601

PACOUT602

COCOUT6

PACOUT702 PACOUT701

COCOUT7

PACOUT801

PACOUT802

COCOUT8

PACOUT902 PACOUT901

COCOUT9

PACOUT1001

PACOUT1002

COCOUT10

PACOUT1102 PACOUT1101

COCOUT11

PACOUT1201

PACOUT1202

COCOUT12

PACOUT1302 PACOUT1301

COCOUT13

PACOUT1401

PACOUT1402

COCOUT14

PACOUT1502 PACOUT1501

COCOUT15

PAD10A

PAD10K

COD1

PAD20K

PAD20A

COD2

PAD30A

PAD30K

COD3

PAD40K

PAD40A

COD4

PAD50A

PAD50K

COD5

PAD60K PAD60A

COD6

PADA00A

PADA00K

CODA0

PADA10A

PADA10K

CODA1

PADA20A

PADA20K

CODA2

PADA30A

PADA30K

CODA3

PADA40A

PADA40K

CODA4

PADA50A

PADA50K

CODA5

PADA60A

PADA60K

CODA6

PADA70A

PADA70K

CODA7

PADA80A

PADA80K

CODA8

PADA90A

PADA90K

CODA9

PADA100A

PADA100K

CODA10

PADA110A

PADA110K

CODA11

PADA120A

PADA120K

CODA12

PADA130A

PADA130K

CODA13

PADA140A

PADA140K

CODA14

PADA150A

PADA150K

CODA15

PAGND101

COGND1

PAGND201

COGND2

PAGND301

COGND3

PAGND401

COGND4

PAGND501

COGND5

PAGPIO001

COGPIO0

PAGPIO101

COGPIO1

PAHSLI0H01

COHSLI0H

PAHSLI0L01

COHSLI0L

PAIOH03 PAIOH04 PAIOH05 PAIOH06

PAIOH02

PAIOH01 PAIOH07 PAIOH08 PAIOH09

PAIOH010

COIOH

PAIOL08

PAIOL07

PAIOL01 PAIOL02 PAIOL06

PAIOL05

PAIOL04

PAIOL03

COIOL

PAJ002 PAJ001

COJ0

PAJ101

PAJ102

COJ1

PAJ202 PAJ201

COJ2

PAJ301

PAJ302

COJ3

PAJ402 PAJ401

COJ4

PAJ501

PAJ502

COJ5

PAJ602 PAJ601

COJ6

PAJ701

PAJ702

COJ7

PAJ802 PAJ801

COJ8

PAJ901

PAJ902

COJ9

PAJ1002 PAJ1001

COJ10

PAJ1101

PAJ1102

COJ11

PAJ1202 PAJ1201

COJ12

PAJ1301

PAJ1302

COJ13

PAJ1402 PAJ1401

COJ14

PAJ1501

PAJ1502

COJ15

PAJBUT01

PAJBUT02

COJBUT

PAJVLED02

PAJVLED01

COJVLED

COMK10

PANTC101

PANTC102

CONTC1

PAPOWER08 PAPOWER07 PAPOWER01

PAPOWER02

PAPOWER06 PAPOWER05 PAPOWER04 PAPOWER03

COPOWER

PAR102

PAR101

COR1

PAR201

PAR202

COR2

PAR302

PAR301

COR3

PAR402 PAR401

COR4

PAR502

PAR501

COR5

PAU10EP

PAU1020

PAU1019

PAU1018

PAU1017

PAU1016

PAU1015

PAU1014

PAU1013

PAU1012 PAU1010

PAU109 PAU108 PAU107 PAU106 PAU105 PAU104 PAU103 PAU102

PAU101

PAU1011

PAU1024

PAU1023

PAU1022

PAU1021

COU1

PAVDD01

COVDD

PAVLED01

COVLED

PAVS01

COVS

PAVS0REV01

COVS0REV

PA5V01

PAD20A

PAD30A

PAD50K

PAPOWER04

PABUTTON02

PAIOL03

PAJBUT01

PAC401

PAIOH09

PAC701

PAIOH08

PABUTTON01

PAC101

PAC201

PAC301

PAC501

PAC601

PAGND101

PAGND201

PAGND301

PAGND401

PAGND501

PAJBUT02

PANTC101

PAPOWER02

PAPOWER03

PAR401

PAU1022

PAU10EP

PAGPIO001

PAIOL01

PAU102

PAC502

PANTC102

PAR101

PAR501

PAU103

PAHSLI0H01

PAR201

PAR402

PAU1024

PAD10A

PAHSLI0L01

PAIOL08

PAU1023

PAC202

PAR102

PAR202

PAU101

PAVDD01

PA5V0REV01

PAD50A

PAC402

PAC702

PAD20K

PAD40A

PAD30K

PAJVLED02

PAD60A PAVS0REV01

PADA00K

PAJ002

PADA10K

PAJ102

PADA20K

PAJ202

PADA30K

PAJ302

PADA40K

PAJ402

PADA50K

PAJ502

PADA60K

PAJ602

PADA70K

PAJ702

PADA80K

PAJ802

PADA90K

PAJ902

PADA100K

PAJ1002

PADA110K

PAJ1102

PADA120K

PAJ1202

PADA130K

PAJ1302

PADA140K

PAJ1402

PADA150K

PAJ1502

PAGPIO101

PAR502

PAR302

PAU104

PACOUT002

PAJ001

PAU105

PACOUT102

PAJ101

PAU106

PACOUT202

PAJ201

PAU107

PACOUT302

PAJ301

PAU108

PACOUT402

PAJ401

PAU109

PACOUT502

PAJ501

PAU1010

PACOUT602

PAJ601

PAU1011

PACOUT702

PAJ701

PAU1012

PACOUT802

PAJ801

PAU1013

PACOUT902

PAJ901

PAU1014

PACOUT1002

PAJ1001

PAU1015

PACOUT1102

PAJ1101

PAU1016

PACOUT1202

PAJ1201

PAU1017

PACOUT1302

PAJ1301

PAU1018

PACOUT1402

PAJ1401

PAU1019

PACOUT1502

PAJ1501

PAU1020

PAD10K

PAIOL05

PAPOWER01

PAC102

PACOUT001

PACOUT101

PACOUT201

PACOUT301

PACOUT401

PACOUT501

PACOUT601

PACOUT701

PACOUT801

PACOUT901

PACOUT1001

PACOUT1101

PACOUT1201

PACOUT1301

PACOUT1401

PACOUT1501

PADA00A PADA10A PADA20A PADA30A

PADA40A PADA50A PADA60A PADA70A

PADA80A PADA90A

PADA100A PADA110A

PADA120A PADA130A PADA140A PADA150A

PAJVLED01

PAR301

PAVLED01

PAC302

PAC602

PAD40K

PAD60K

PAU1021

PAVS01

Figure 10 PCB layout bottom

TLD7002-16SHIELD

User guide

5 PCB layout

User guide 10 Rev.1.00

2022-07-26

Table of contents

Other Infineon DC Drive manuals

Infineon

Infineon EiceDRIVER 6ED Series Installation and operating instructions

Infineon

Infineon TLE94112ES User manual

Popular DC Drive manuals by other brands

Vincent Associates

Vincent Associates UNIBLITZ ED12DSS user manual

EKSMA OPTICS

EKSMA OPTICS DQ-100-4 Technical description

Chamberlain Garog

Chamberlain Garog D Series operating manual

Parker

Parker PDS Series user guide

Festo

Festo DGC G Series Repair instructions

Binks

Binks QS-5012-1-CE Service manual

Danfoss

Danfoss VLT 2800 Series Quick setup

ABB

ABB ACQ580-01 Series Quick installation and start-up guide

YASKAWA

YASKAWA CANopen SI-S3 Technical manual

GE D20A6 instructions

Unex

Unex MC-D-250-1000-050W-TW operating manual

Geckodrive

Geckodrive G213V manual

ABB

ABB RSYC-01 user manual

Rockwell Automation

Rockwell Automation PowerFlex 700S Programming manual

WEG

WEG DeviceNet CFW500 user manual

Siemens

Siemens SINAMICS G List manual

Siemens

Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Operating instructions & installation instructions

SOMFY

SOMFY JR RU 30 instructions