infaco SC160P3 User manual
3
Contents EN
PW3, a multi-function handle 4
Compatible tools 5
Precautions before use 6
Personal protection equipment 6
Protection of the environment 6
General product view 7
Specifications 7
Compatible batteries 8
User guide 9
Tool gap adjustment 13
Precautions for use and safety 14
Servicing and maintenance 16
Safety instruction 21
Warranty conditions 22
Advice 23
Troubleshooting 24
Technical information 27
54
PW3
+ TR9
PW3
+ SC160P3
PW3
+ THD600P3
PW3
+ THD700P3
PW3
+ PWMP3
+ PWP36RB
PW3
+V5000P3ET
PW3
+V5000P3AF
PW3
+V5000P3EF
PW3
+ PW930P3
+ TR9
PW3
+ PW930P3
+SC160P3
PW3
+ PW930P3
+ THD700P3
PW3
+ PW930P3
+ THD600P3
Compatible tools
PW3
+ PS1P3 (sarclage)
PW3
+EP1700P3
PW3
+EC1700P3
PW3
+ PB100P3 (hoeing)
+PB150P3 (hoeing)
+PB220P3 (hoeing)
+PN370P3 (sweeping)
Pole tools
Hand tools
PW3, a multi-function handle
rEfErence description
THD600P3 Double hedge-trimmer, blade length 600mm.
THD700P3 Double hedge-trimmer, blade length 700mm.
TR9 Arborists chainsaw, maximum cutting capacity Ø150mm.
SC160P3 Saw head, max cutting capacity Ø100mm.
PW930p3 Carbon extension, length 930mm.
Pw1830p3 Carbon extension, length 1830mm.
PWT1650p3 Carbon extension, length 1650mm.
Ps1p3 Fixed tying pole 1480mm.
PB100P3 Fixed hoe pole 1430mm Cutting head Ø100mm.
PB150P3 Fixed hoe pole 1430mm Cutting head Ø150mm.
PB220P3 Fixed hoe pole 1430mm Cutting head Ø200mm.
PN370P3 Fixed sweeping pole 1430mm Brush Ø370mm.
PWMP3 + PWP36RB De-cankering tool (mill diameter 36mm)
PWMP3 + PWP25RB De-cankering tool (file diameter 25 mm)
EP1700P3 Desuckering tool (telescopic pole 1200mm to 1600mm).
EC1700P3 Blossom thinner (telescopic pole 1500mm to 1900mm).
V5000p3ef Olive harvester (fixed pole 2500mm).
v5000p3et Olive harvester (telescopic pole 2200mm to 2800mm).
v5000p3AF Alternative olive harvester (fixed pole 2250mm)
76
Precautions before use
Protection of the environment
Read the instructions for use carefully, especially the safety instructions.
The wearing of a hard hat, eye and ear protection is MANDATORY
Hand protection using cut-prevention work gloves.
Foot protection using safety footwear.
Face protection using a visor
Body protection, using cut protection overalls.
IMPORTANT! Extensions can be made of conductive materials. Do not use near
sources of electricity or electric wires
IMPORTANT! Do not approach any part of the body to the blade. Do not remove
the cut material or hold the material to be cut while the blades are moving.
WARNING. Read all the safety warnings and all the instructions. Failing to
heed warnings and follow instructions may lead to an electric shock, a fire and/or
serious injury.
Keep all warnings and instructions for future reference. The term “tools” in the war-
nings refers to your battery powered electric tool (with power cord), or your tool operating
on a battery (without power cord).
Observe all country-specific waste disposal rules and regulations.
>Power tools must not be disposed of with household refuse.
>The device, accessories and packaging must be taken to a recycling centre.
>Ask the approved INFACO dealer for up-to-date information on the eco-
compatible elimination of waste.
Personal protection equipment
Reference SC160p3
Rated power supply 48 VDC
Max power 1300 W
Weight 3440 g
Length 570 mm
Speed 3200 cuts / min
These specifications are given as an indication only. Under no circumstances may they be considered as
contractually binding. They are subject to modification without prior notice in the interests of product
development.
Patented equipment
General product view
Specifications
Box contents
SC160
1 Protective cover
1 Blade cover
Manual
Saw blade Handle tip
Blade cover
Cover screw Hook
Cover
98
User guide
Compatible batteries
120Wh battery
831B
Cable compatibility
825S
500Wh battery
L810B
Cable compatibility
PW225S
150Wh battery
731B
Cable compatibility
PW225S (requires fuse
replacement by 539F20).
820Wh battery
L850B
Cable compatibility
L856CC
First use
The first time you use the equipment, we strongly recommend you to ask the advice of your
dealer, who is qualified to give you all the advice you need for correct use and optimum
performance. It is imperative to carefully read the tool and accessory user manuals before
handling or powering up the tool.
Installation and connection
Only use INFACO brand batteries with a 48 Volt power supply.
Any use with batteries other than INFACO batteries may lead to damage. The
warranty on the motorized handle will be void if batteries other than those
manufactured by INFACO are used.
In wet weather, it is imperative to carry the battery belt under waterproof clothing
to keep the battery unit protected from the rain.
Disconnect
the power cord
1110
> Mounting the saw on the handle
Mounting the handle
Using the machine
> It is IMPERATIVE to fit the blade cover.
> Tighten the wing nut
> Connect the battery > Connect the power cable
> First start-up
1st start-up: 2 short presses on the trigger = ON
Exit from standby mode: 2 short presses on the trigger = ON
Normal operation: 1 long press on the trigger = ON
Trigger release: OFF
It is mandatory to hold it with bovth hands
1312
Assembly on a pole
Tighten the wing nut
No movements
Presence of movements
GAP OK
ADJUST
THE GAP
It is imperative to disconnect the machine.
Tool gap adjustment
Disconnect
the power cord
1514
Precautions for use and safety
Travail en hauteur
Warning about risks when working at heights using a ladder.
High-risk work configuration not recommended.
We recommend the use of the extension (option) for all work at heights. In order to prevent
any risk of falls and other accidents.
It is mandatory to hold it with both hands
Storage and transport
When storing and transporting the chainsaw, we recommend draining off the oil and storing
the tool in a box, as oil seepage can occur.
It is IMPERATIVE to fit the blade
cover and disconnect the power cord
for storage and transport.
For the transport, storage, servicing, maintenance of the tool, or any other
operations not related to tool function operations, it is imperative to disconnect
the device.
Disconnect
before transport
and storage
Disconnect
before transport
and storage
1716
All servicing and maintenance operations must be
carried out with the tool disconnected from all power
sources:
Adapt the servicing frequencies to your tool use.
Occasional use, space out the frequency. Intensive use,
increase the frequency.
Before starting work
At the end of the day
Each time the battery is charged
Once per week
Once per month
Once per year
In the event of damage
In the event of a malfunction
When necessary
Complete machine
Visual inspection of its
condition
Cleaning
Inspection by the dealer
Accessory assembly Cleaning and lubrication
Saw blade gap
Inspection
Adjust
Saw blade
Visual inspection of its
condition
Cleaning
Replacement
Saw head
Gap check
Lubrication
Inspection by the dealer
Power cord Visual inspection of its
condition
Battery Visual inspection of its
condition
Vest Visual inspection of its
condition
Handle Visual inspection of its
condition
Servicing and maintenance
It is imperative to disconnect the
machine from the battery
Changing the blade
New saw blade
SCP3 SCP4 SCP4S
Only use POWERCOUP blades specific to
the saw.
1 2
3 4
5 6
1918
7 8
910
11 12
Blade gap
1 2
3 4
2211
22
5 6
This manual suits for next models
5
Table of contents
Other infaco Saw manuals
