
IVHD-1000 Operation manual
(17) Auto Exposure Detection
Average/Center-Weighted/Spot/BacklightCompensation
(18) Flicker cancellation
*
Valid at 60fps,59.94fps,30fps,and 29.97fps.
(19) Edge Enhancement OFF,1~7 (typ.2)
(20) Color Correction Standard, Fluorescent Light, Tungsten Lamp
(21) Color Saturation Adjustment 0% (B/W)~100% (typ.)~200%
(22) Color Compression OFF, 1~7(typ.5)
(23) Noise Reduction ON,OFF
(24) Contrast/D Range Contrast-2, Contrast-1,Standard, Contrast+1, Contrast+2, D-range Extension
(25) Master Pedestal
~
~
(26) Pedestal (R, G, B)
~
~
(27) Color Balance RGB: 50 ~100(typ.) ~150 each
(28) Pixel Defect (White spot)
Correction Corrected at factory setting.
(29) Preset (Camera settings) 1, 2, 3, and 4 (4 presets can be set.)
(30) DC Iris Output
of today) Auto/Open selectable. Can be used with electric shutter. (Electric shutter has priority.)
(31) Remote Control Operation The camera can be controlled via RS-422 communications with DATA connector.
With connecting the optional
camera operational control panel, camera settings can be set
on OSD (On Screen Display).
(32) Durability Vibration Acceleration
Frequency
Direction
Testing time
: 98m/s2 (10G)
: 20~200 Hz
: X,Y, and Z, 3 directions
: 120min for each direction
Shock
No malfunction shall be occurred with 980m/s2(100G) for ±X,±Y, and ±Z,
6 directions.
(33) Operation environment Performance
Guaranteed
20 ~ 80%RH with no condensation
Operation 5 ~+45℃Humidity with no condensation
guaranteed 20 ~ 80%RH
※Performance guaranteed: All the specifications specified in this manual is guaranteed under
performance guaranteed temperature.
※Operation guaranteed: All the camera functions operate normally under operation
guaranteed temperature.
(34) Storage Environment Storage Temperature: -25 ~ +60℃, Humidity: 20 ~ 80%RH with no condensation.
<3G-SDI output Level A and Level B>
The difference between Level A and Level B is a way of mapping Y signal and Cb/Cr signal onto 3G-SDI standard signal. The
difference does not affect the resolution of the video signal. Some 3G-SDI receivers correspond to either Level A or B,
whereas other receivers correspond to both Levels, so please set the camera mode to match your 3G-SDI receiver.
℃