USER INSTRUCTION MANUAL
TURNING ON/OFF THE UNIT
In standby mode, press “ON” button once to turn the FM radio on or switch to AM band. In radio mode,
long press “OFF” button for 1-2 seconds to turn the radio off.
SETTING THE TIME
1. In standby mode, press and hold “TIME” button, the display will flash. Set the time with “HR” hours
and/or “MIN” minutes
2. Press “TIME” button again to confirm
NOTE:
- If during the adjustment time no key is activated in around 4 seconds, the current display will be
automatically stored.
LISTENING TO THE RADIO
When the unit is ON, the corresponding Indicator lights up
Manual search
1. Adjust the volume by “—” Volume down or “+” Volume up to the desired level.
2. Choose your radio station with -Tuning down or + Tuning up.
Automatic search
Press and hold “∨” Tuning down or “∧” Tuning up for 2 seconds. The automatic search locates strong
stations. A station with a weak
signal can be set manually by repeatedly pressing -Tuning down or + Tuning up.
To enhance radio reception ability:
FM: Extend the wire antenna or move another proper position.
AM: Rotate the unit horizontally for optimum reception or move to another proper place.
Preset stations
This unit can store 10 FM and 10 AM stations.
Long press and hold the “PRESET” button for around 4 seconds to start AUTO SCAN of radio station
Manual storage:
1. Select a radio station manually or in automatic search.
2. Press and hold the “PRESET” button for around 1 second. 'P 01' blinks on the screen.
3. Press “P-“ or “P+” to select a channel.
4. Press the “PRESET” button to save it
5. Repeat steps 1-4 to store other stations
Listen to station presets
Press the “PRESET” button “P 01” blinks on the screen
Press “PRESET” repeatedly to select your desired channel
You can also press “P-“ or “P+” to select your desired channel
SETTING THE ALARM AND THE ALARM MODE3
