IKK IK-WM01 User manual

iKK – WIRELESS MICROPHONE

USER MANUAL

Model: IK- WM01

–

UHF Wireless Microphone – IK-WM01

Welcome

Congratulations on choosing to buy an iKK® product.

All products brought to you by iKK® are manufactured to the highest

standards of performance and safety and, as part of our philosophy

of customer service and satisfaction, are backed by our

comprehensive we hope you will enjoy using your purchase for many

years to come.

–

UHF Wireless Microphone – IK-WM01

Contents

02 - Welcome

03 - Accessories

04 - Basic information

04 - Instruction for use

04 - Battery status

05 - Paring Devices

06; 07; 08; 09 - Installation

10 - Repeater function

10 - Headset,

11 - Features; Specification; Maintenance, Cleaning, Storage,

Troubleshooting

–

UHF Wireless Microphone – IK-WM01

ACCESSORIES:

Cable 3,5mm TRS / TRS

Adapter 3,5mm, TRS (3 pole) / TRRS (4 pole)

Adapter 3,5mm, TRS (3 poles) / 6,5mm, TS (2 poles)

Headset for transmitter (TX)

Short MIC / TRS (3 poles)

Lapel Mic / TRS (3 poles)

Transmitter / Receiver

Cable 3,5mm TRRS (4 poles)/ TRS (3 poles)

–

UHF Wireless Microphone – IK-WM01

BASIC INFORMATION:

1st identifying the devices:

RECEIVER (RX)

TRANSMITTER (TX)

1. This product is a sound signal transmitter and receiver equipment.

2. It needs to be equipped with 3,5mm cable interface, input/ output interface or

suitable Audio, Loudspeaker, Power amplifier, Computer, Camera and others

equipment connected to our device by correct accessories.

3. This product is divided into Two parts: TRANSMITTER and RECEIVER using

3,5mm to connect external for wireless performance. Are provided some basic

accessories for easy help to use our product in most external devices, please

check the INSTALATION for more details.

4. This model WM-01, works by UHF frequency, high end, wireless technology

with good amplification that allow to reach up to 40 meters distance in open

field, no directional restriction, no dead angle or interference, with clear sound,

with high quality performance.

INSTRUCTION FOR USE:

1. TURN ON the Transmitter, will shows the Blue light On.

2. TURN ON the Receiver, will shows the Blue light ON, and both devices will

PAIRING automatically, after will keep Red light On, as well.

3. Connect the Receiver unit into an External device by INPUT connection of

device.

4. Select the Input mode on External Device, by switching “MODE button”, to

confirm the INPUT connection.

5. Connect the microphone into the Transmitter unit, try to speak some word and

check if sound is getting into receiver by External device sounds.

Mic in / Line in

ON/ OFF (key)

RF Antenna

On/Off (Blue light)

Vol. / Ch (-)

Vol. / Ch (+)

Charging (Red light)

Pairing (Blue light)

Audio Output

3,5mm

ON/ OFF (key)

On/Off (Blue light)

Charging (Red light)

Pairing (Red light)

–

UHF Wireless Microphone – IK-WM01

BATTERY STATUS:

a) Light Status: The transmitter and Receiver are built-in, with re-chargeable

polymer battery.

b) These products can be charged by any Computer USB port or Mobile AC

adapter USB charging, connecting by USB /Micro USB cable.

c) When the Blue Light flashes or goes out, or turning to Red Light, its mean that

the battery power is insufficient, so it requires to be charge both devices

Transmitter/ Receiver at same time.

d) After charging is completed, the Red light will turn off.

PAIRING DEVICES:

Transmitter (Tx) and Receiver (Rx).

Normally the units will be factory default, it means pairing AUTOMATICALLY when

turned ON. If it doesn’t happen please follow the procedures below.

Note:

- The Receiver has a 1 Blue light to indicate unit “ON” mode and 1 Red light to

indicate that Transmitter and Receiver are connected it mean “Paired”.

- The Transmitter has 2 Blue Light, one light to indicate ON mode, and 1 light to

indicate Pairing procedures when it needs to be in pairing mode procedure.

Pairing procedure:

Turn the Transmitter ON (Tx)

Press and Hold per 1 second “Up” or

Confirm if Tx blue light is ON

“Down” key, to confirm the Step.

Press and Hold the Vol.keys Up/Down at

Now Turn OFF both Rx/Tx units, and

same time, until Tx blue light get flashes

Turn ON again Rx and Tx, will be seen

then release the keys.

Rx Red and Blue light “ON” by Tx unit ON.

Turn the Receiver ON (Rx)

Its mean that units are paired successfully!

Confirm if Rx Red light get 3 flashes

If your connection problem persists

and Stopped flash, that indicates Tx and Rx

Please repeat the procedure.

has communicated.

Or make sure the battery are charged

Change Frequency:

If your environment produce interference that can affect your device performance, you

can try to reduce interference by changing the frequency, following the below Step.

Changing Frequency

Turn ON both items Rx/Tx

At Tx, press and hold per 2 second the key “Up or Down”, pay attention that both

units the lights will flashes, its indicates that frequency is changing in booth units.

Release the key and the frequency will stop and keeping automatically paired in

new frequency.

If your problem persists, please repeat the procedure to get another frequency

–

UHF Wireless Microphone – IK-WM01

INSTALATION/ Configuration:

2nd Connecting into External Devices.

Receiver + Speaker box by (Line IN)

Transmitter + Lavalier microphone

Receiver + Mixer by (Line IN)

Transmitter + Lavalier microphone

Remark: After the parts are connected, please make some noise into MIC to confirm

the sound is working.

Connect Lapel Mic into Transmitter

(TX)

Note: TRS cable adapter it's included in the

package, to perform all connections.

Please select “Line In" mode at panel control of

Speaker box

+ TRS adapter to

"LINE IN”

Speaker

Box

(RX)

(TX)

Please select “Line In" mode at panel control of

Mixer or Sound table.

Or 3,5mm TRS adapter

to "LINE IN”

Sound table

or Mixer

6,5mm TS adapter

to "LINE IN”

(RX)

Connect Lapel Mic into Transmitter

–

UHF Wireless Microphone – IK-WM01

Receiver + MAC OSX by (Earphone)

Transmitter + Lavalier microphone

How to Set configuration at MAC OSX

2- click in Sound icon

3- select Output,

4- select Mac “Speaker”,

5- select “INPUT”,

6- choose External microphone.

Its Done! Now you can hear or record your

Lavalier Mic into you computer, if needed

just adjust the volume level.

Remark: After all connected and adjusted, please open your APP, ex. “Garage Band”

(TX)

1- Please select “System" mode at panel

control of Speaker box.

Note: Connect the Receiver into “Earphone”.

(RX)

Connect Lapel Mic into Transmitter

–

UHF Wireless Microphone – IK-WM01

Receiver + Windows PC (front/ top)

OR Receiver + Windows PC (back side)

1- With “Right click” on speaker Icon in your screen below, right side, to open

sound setup.

How to Set configuration at Windows PC

2- click in Open sound setting

3- select Input device,

4- Make some noise in your TX Microphone,

5- Check out if the “blue bar” will working by

Mic sound.

6- choose External microphone.

Its Done! Now you can hear or record your

Transmitter Mic into your computer, if needed

adjust the volume level.

Remark: After all connect and adjusted, please open your APP, ex. “AUDACITY”

+ Cable adapter

to "LINE IN”

(RX)

Note: PC front or Top panel, Connect the

Receiver into “Mic in”.

+ Cable adapter

to "MIC IN”

(RX)

–

UHF Wireless Microphone – IK-WM01

Mic direct connections

3 pole/ 4 pole

Lapel Mic direct to devices below

Apple system. and Android system

If wishes, the microphone can be connected direct to devices using the adapter.

Receiver + MOBILE by (Earphone)

Transmitter + Lavalier microphone

How to Set configuration for Android or iOS devices

1- Insert the Receiver into “Earphone

jack”.

2- Open your App to “Record”the sounds

3- Speak to microphone and check

Its Done! Now you can hear or record

your Lapel Mic into your mobile, if

needed just adjust the volume level in your

APP.

Reminding: Some version Apple devices

requires specific adapter, that you should

provide by your own.

Remark: After all connect and adjusted, please open your APP, ex. “Garage Band”

NOTE: Apply this same configuration for iPad;

iPhone.

Connect Lapel Mic into jack IN of “Transmitter".

(TX)

Note: Using the earphone as an Input "Line IN".

(RX)

Lapel Mic / TRS (3 poles)

Table of contents

Other IKK Microphone manuals

IKK

IKK IK-UM01 User manual

Popular Microphone manuals by other brands

IK Multimedia

IK Multimedia iRig Stream MIC PRO user manual

DAPAudio

DAPAudio RM-101 user manual

AKG

AKG CHM 21 User instructions

Sennheiser

Sennheiser evolution wireless series EM 100 instruction manual

Sony

Sony C-48 operating instructions

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG user manual

Shure

Shure WH30TQG user guide

auna PRO

auna PRO MIC-900 manual

AKG

AKG D 3800 User instructions

Shure

Shure KSM141 user guide

MAIIN SOUND

MAIIN SOUND IIN style instruction manual

Earthworks

Earthworks TC25 user manual

Sennheiser

Sennheiser evolution D1 user manual

Alesis

Alesis MicLink Wireless user guide

DSPPA

DSPPA D6234 manual

Monacor

Monacor IMG STAGELINE ECM-300B manual

Ansr Audio

Ansr Audio Scan16 user manual

Shure

Shure MXA710 Series user guide