Ikan PT3700-TK User manual

PT3700-TK

PT3700 Teleprompter & Hard Case Travel Kit

QUICKSTART GUIDE

Checked by

www.ikancorp.com

CONDITIONS OF WARRANTY SERVICE

• Free service for one year from the day of purchase if the problem is caused by manufacturing errors.

• The components and maintenance service fee will be charged if the warranty period has expired.

Free Service will not be Provided in the Following Situations: (* Even if the product is still within the warranty period.)

• Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.

• Damage caused by natural disaster, abnormal voltage, and environmental factors etc.

1.713.272.8822

support@ikancorp.com

QUICKSTART GUIDE

PT3700-TK

QUICKSTART GUIDE

PT3700 Teleprompter & Hard Case Travel Kit

What’s included

www.ikancorp.com 713-272-8822

Teleprompter Frame

Assembly with Monitor

Camera Mount

Assembly

18"Rods x2Hood 200mm Riser

Rods x2

PrompterPro Software



  



5/32 Hex Key Cork Strips x 4

 DRS-01 x 2

PT-CASE



PT3700-TK

QUICKSTART GUIDE

PT3700 Teleprompter & Hard Case Travel Kit

713-272-8822

www.ikancorp.com

Place teleprompter

frame assembly on a at

surface and slide the 18

in. rods into rod mounts.

Rod Mounts

You can position the

glass at any angle you

want but the preferable

angle is 45°

STEP 1:

STEP 2:

PT3700-TK

QUICKSTART GUIDE

PT3700 Teleprompter & Hard Case Travel Kit

713-272-8822

www.ikancorp.com

The tripod mount has 3

sets of holes that allow

you to mount the plate

either towards the front or

rear to help balance the

telepromter better.

For larger cameras its is

better to have the plate

toward the rear and for

smaller cameras towards

the front.

STEP 3:

Slide the Camera Mount

Assembly onto the 15mm

Rods.

Use the included

5/32 Hex Key to

remove and attach

the Raiser Rods.

PT3700-TK

QUICKSTART GUIDE

PT3700 Teleprompter & Hard Case Travel Kit

713-272-8822

www.ikancorp.com

Attach camera to

camera mount and

slide to best position.

Make sure all thumb

screws are secure.

If you require the camera to

be positioned higher you

can replace the 200mm

raiser bars in place of the

pre-installed 130mm Rods.

STEP 4:

DSLR CAMCORDER

PT3700-TK

QUICKSTART GUIDE

PT3700 Teleprompter & Hard Case Travel Kit

713-272-8822

www.ikancorp.com

Attach hood to glass frame

using the integrated

magnets. You can attach

the optional side aps.

STEP 5:

PT3700 Teleprompter & Hard Case Travel Kit

Checked by

www.ikancorp.com 713-272-8822

Glass can be removed from

the frame by removing the

two phillip head screws.

Easily slide the glass out

of the frame.

*You should only need to do this for cleaning*

PT3700-TK

QUICKSTART GUIDE

Monitor Ports

BNC – AV Composite Input

VGA – Video Graphics Array DE15 Connection

HDMI – High-Deﬁnition Multimedia Interface Input Connection

Power Port – 12-24v Input

HDMI – Switch HDMI input

VGA – Switch to VGA input

AV – Switch to composite BNC input

Flip – Toggle image ﬂip

(Can be set to horizontal, vertical, or both via menu)

Up Arrow – Toggle up to adjust setting

Menu – Access to monitor settings

Down Arrow – Toggle down to adjust setting

Monitor Menu Settings

Video Conﬁg

Contrast (White Level)

Brightness (Black Level)

Tint (Chroma Hue)

Chroma (Chroma Saturation)

Sharpness (Detail)

RGB Setup – Manually conﬁgure RGB

Return

System Conﬁg

Menu Duration – Set duration of how long menu stays

on screen

Video Ratio – Set screen aspect ratio 16:9 or 4:3 (4:3 is

native resolution, 16:9 will create black bars)

Flip-H – Assign toggle button to ﬂip image horizontally

Flip-V – Assign toggle button to ﬂip image vertically

Reset – Factory reset

Return

PC Setup (Only available for VGA)

H-Position – Adjust horizontal position

V-Position – Adjust vertical position

Auto – Monitor automatically adjust position

Return

Exit

HDMI

How to set-up FLIP button feature:

1. Press MENU button

2. Navigate to SYSTEM CONFIG.

3. Navigate to FLIP-V or FLIP-H

4. Change FLIP-V and/or FLIP-H to “ON”

5. Exit MENU

6. The FLIP button should now be activated and can be

pressed to mirror the image Horizontally or Vertically

7. When FLIP-H is ON, the image will ﬂip Horizontally

8. When FLIP-V is ON, the image will ﬂip Vertically

9. If both are ON, the FLIP button will toggle both

Horizontal and Vertical ﬂip

Table of contents

Popular Lighting Equipment manuals by other brands

Brizo

Brizo 8SP-MU-4 manual

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 installation instructions

IKEA

IKEA BJÖRKSPIREA manual

Laserworld

Laserworld Evolution Series ES-400RGB manual

Alien

Alien RG STAR user manual

EuroLite

EuroLite LED B-40 user manual

Qazqa

Qazqa Suplux SL 3 Black 103062 instruction manual

Commercial Electric

Commercial Electric 54568141 Use and care guide

CREE LIGHTING

CREE LIGHTING 304 Series installation instructions

Goobay

Goobay 49867 user manual

ECOMAN ITALIA

ECOMAN ITALIA LED T8 instruction manual

Alkalite

Alkalite Krypton KT-81 user manual

Clas Ohlson

Clas Ohlson GU10 manual

DTS

DTS DELTA 10 F user manual

ring

ring Solar Steplight manual

One Stop Gardens

One Stop Gardens 57696 Owner's manual & safety instructions

Chauvet DJ

Chauvet DJ COREpar UV120 ILS user manual

SIREM

SIREM Swimeo A2 instructions