iHome AutoVac Eclipse iHRV2 User manual
Owner’s Guide
Model iHRV2
CONTENTS
Safety Instructions.................................................1
Product Overview.............................................2-3
Setting Up................................................................4
How to Use........................................................5-10
Maintenance......................................................11-13
Troubleshooting...................................................14
FCC Info...................................................................15
Check out our helpful setup videos
For support content and the latest digital version of this manual scan
the QR code below or visit ihomeautovac.com/eclipsevideos
Questions? Contact Customer Service
Web: iHomeautovac.com
Email: [email protected]
Phone: 877-370-4580
SAFETY INSTRUCTIONS 1
Before using this product, please read the following safety instructions and follow all safety precautions. Any operation inconsistent
with this instruction manual may cause damage to this product.
• Only authorized technicians can disassemble this product. Users are not recommended to disassemble this product by themselves. Doing
so will void warranty.
• Only use the included power adapter. Third part adapters may damage the iHome Autovac.
• Do not touch wires, sockets or power adapters when your hands are wet.
• Do not place this product near cigarette butts, lighters and other materials with smoldering fire
• Please clean Dustbin and brushes regularly.
• Do not place any object, pets or people on top of the iHome Autovac.
• This product is an indoor household product. Do not use outdoors.
• Do not use this product in wet environment (i.e, bathroom)
• Before using this product, please clear the floor of all objects other than furniture as some small objects may obstruct, get caught in, or
damage the iHome Autovac.
• Please use and store iHome Autovac in room temperature environments only.
• Do not use products in environments with open flames or fragile objects.
• Do not allow human hair, clothes, fingers and other parts to approach the opening and operate parts of the product.
• Do not allow the iHome Autovac to pick up objects such as stones and waste paper that may clog product.
• Do not allow the iHome Autovac to pick up flammable substances such as oil, printer toner and photocopier toner.
• Do not allow the iHome Autovac to pick up any burning articles, such as cigarettes, matches, ashes and other articles that may cause fire.
• Do not place objects near the suction port. Do not use the product when the suction port is blocked. Clean up the garbage dust, wool, hair,
etc to ensure smooth air circulation at the suction port.
• Use the power cord carefully to avoid damage. Do not use the power cord to drag or pull the product and the charging base. Do not use
the power cord as a handle.
IN THE BOX 2
1 iHome Autovac Eclipse 1
2 Charging Base 1
3 Power Adapter 1
4 Dustbin 1
5 Brush Cleaning Tool 1
6 Remote Control 1
7 Boundary Strip 1
8 User Manual 1
9Mop Tank (sold separately for model iHRV1) 1
10 Mop Pad (sold separately for model iHRV1) 2
11 HEPA Filter 2
12 Side Brush (set of 2) 2
No. Description Quantity 1 2 3 4
5 6 7 8
9 10 11 12
PRODUCT OVERVIEW 3
HEPA Filter
Primary Filter
Filter Housing Cover
Main Dustbin Cover
Mop Pad
Water Tank
Water Injection Port
Power Indicator
Charging Port
Charging Contacts
Charging Contacts
Omnidirectional
Wheel
Li-ion battery
Left Wheel
Main Brush
Dustbin
Right Wheel
Side Brush
Cliff Detection
Dustbin Release
Button
Infrared/Bump
Sensor
Home Button
Power Button
Wi-Fi Indicator
REAR MOP TANK
DUSTBIN
CHARGING BASE
BOTTOM
(sold separately for model iHRV1)
SETTING UP THE CHARGING BASE
SETTING UP THE AUTOVAC ECLIPSE
4
1: Choose a placement near a power outlet and with enough free space in front and on
sides (see diagram to the right)
2: Plug the power adapter into the right side of your charging base and the other end into
a functioning wall outlet.
NOTE: Clearance around the charging base is necessary to prevent obstructions when the
Eclipse returns to charge. Avoid using a power source that may inadvertently be
switched off (e.g. power strip, outlet controlled by a light switch, GFCI)
1: Position the Eclipse on the floor in front of your charging base.
2: Press the touch-sensitive power icon until it turns blue.
3: Now press the Home icon . The Eclipse will navigate to the charging base
and beep when properly docked. The Home icon will flash blue while
charging and turn solid blue when finished.
NOTE: Allow your Eclipse to fully charge before first use . The green light at the
top of the charging base will always flash green when connected to wall power.
This is normal behavior.
The Home icon on your Autovac Eclipse will flash BLUE while charging and
will turn solid BLUE when completely charged.
GETTING STARTED 5
Understanding your iHome Autovac Eclipse
The iHome Autovac Eclipse is designed to automatically and
intelligently clean your home. Multiple sensors are used to avoid
obstructions and cliffs. The Autovac will continue to clean until it
has determined that the addressable floor area has been covered.
Once cleaning is finished or the battery is low, the Autovac Eclipse
will automatically return to the charging base.
NOTE: Connecting Eclipse to Wi-Fi is not required but highly
recommended. Using the iHome Clean App, you can follow the
steps below to connect. The app will let you manage Eclipse from
anywhere, set cleaning schedules, view floor maps, cleaning
history and more! Wi-Fi connection also allows you to link Eclipse
to Alexa or Google Assistant to control Autovac by voice.
1: Download the iHome Clean App
Search “iHome Clean” in the App Store or use the QR code below:
2: Get started with this helpful video
Use the QR code below or go to www.ihomeautovac.com/Eclipsevideos
1: Make sure your mobile device is connected to Wi-Fi
• Make sure that the Wi-Fi network is not 5G (the app only supports 2.4G network)
• The name & password of the Wi-Fi network cannot contain any special characters
iHOME CLEAN APP - WI-FI CONNECTION 6
5: Go to Wi-Fi settings on your device and select “Autovac Eclipse”
6: Re-open the iHome Clean App & wait for the connection to complete
2: Open the iHome Clean App, select “Add device” and select Eclipse
4: Select your 2.4G Wi-Fi network and enter the password
3: Press & hold Home button for 5 seconds to enter network config
mode until the Wi-Fi indicator flashes.
NOTE: Ensure that you have a strong
Wi-Fi signal in the location of your
setup/charging base.
USING YOUR AUTOVAC ECLIPSE 7
Before using this product, please clear the floor of all objects other than furniture as some small objects may obstruct, get caught
in, or damage the iHome Autovac Eclipse. Your Autovac should be docked to the base and FULLY CHARGED before beginning a
cleaning cycle. This will ensure optimal run time.
Cleaning and Mapping - The Eclipse is designed with HomeMap navigational sensors to clean without the need to enter or save a
map of your home. Unlike less capable robot vacuums, your iHome Autovac Eclipse will vacuum and mop in a "U" shape cleaning
pattern. It will map out your home during every use, covering the entire square footage of the area. Simply initiate one of the
cleaning modes (described below) on the remote control, in the iHome Clean app, or simply tap the Power Icon on the Eclipse
to start an Auto-clean cycle. It’s that easy!
Returning to Base - The iHome Autovac Eclipse will detect the infrared signal emitted by the charging base to find its way back.
Please note that the infrared signal may be affected by distance, walls, or other obstructions. It may take several minutes for the
Eclipse to find its way back to the charging base. Small spaces, or spaces with lots of furniture will cause the Autovac to bounce
and redirect more frequently. The "U" type pattern will resume when it reaches open space. A map of the path taken by your
Autovac is available to view in the iHome Clean App.
USING YOUR AUTOVAC ECLIPSE 8
Cleaning Modes
Auto Clean - The Eclipse will automatically clean your floor until it has covered the entire surface. Once it has cleaned the entire
surface it will automatically return back to the charging base.
Edge Clean - The Eclipse will find the edges of your room and focus on cleaning those edges throughout its cleaning cycle.
Spot Clean - The Eclipse will focus on a specific area and clean thoroughly. First, use the manual navigation buttons on the remote
control (or in the app) to guide the Eclipse to the desired area. Then, choose Spot Clean mode.
Single Room Cleaning - The Eclipse will focus specifically on cleaning one room by avoiding any open door ways.
Powermop - recommended after dry dust/debris is vacuumed manually or by your Autovac Eclipse. Attach the water tank as
described later in this manual. Choose Powermop in the iHome Clean App or the included remote and the Eclipse will automatically
mop the surface and return to the recharge base once complete. NOTE: During Powermop mode the Eclipse maintains a gentle
suction for dry debris into a separate compartment in the mop attachment.
Manual Control - Using the iHome Clean App or the included remote, you can manually control where the vacuum navigates.
Table of contents
Other iHome Vacuum Cleaner manuals
iHome
iHome AUTO VAC ECLIPSE User manual
iHome
iHome iHRV4 User manual
iHome
iHome NOVA S1 User manual
iHome
iHome AUTO VAC NOVA PRO iHRV14 User manual
iHome
iHome AUTO VAC ECLIPSE PRO iHRV11 User manual
iHome
iHome AUTOVAC Eclipse Series User manual
iHome
iHome VAC SV1 User manual
iHome
iHome AUTOVAC LUNA User manual
iHome
iHome AutoVac Luna Pro User manual
iHome
iHome WETVAC WV5 User manual
