IFM DTE105 User manual

Operating instructions
RFID evaluation unit
DTE105
80293006 / 00 08 / 2020
UKUK

2
Content
1 Preliminary note���������������������������������������������������������������������������������������������������4
1�1 Symbols used ������������������������������������������������������������������������������������������������4
1�2 Warnings used�����������������������������������������������������������������������������������������������4
1�3 Copyright and trademarks �����������������������������������������������������������������������������4
2 Safety instructions �����������������������������������������������������������������������������������������������4
3 Functions and features ����������������������������������������������������������������������������������������5
3�1 Configuration via Ethernet interface ��������������������������������������������������������������6
3�2 RFID antennas ����������������������������������������������������������������������������������������������6
4 Items supplied������������������������������������������������������������������������������������������������������6
5 Function���������������������������������������������������������������������������������������������������������������6
6 Installation������������������������������������������������������������������������������������������������������������7
6�1 Installation distance ���������������������������������������������������������������������������������������7
6�2 Installation position ����������������������������������������������������������������������������������������8
6�3 Mounting options �������������������������������������������������������������������������������������������8
6�3�1 Mounting on DIN rail�����������������������������������������������������������������������������8
6�3�2 Removal �����������������������������������������������������������������������������������������������9
6�3�3 Mounting plate ��������������������������������������������������������������������������������������9
7 Electrical connection������������������������������������������������������������������������������������������10
7�1 AUX voltage supply �������������������������������������������������������������������������������������10
7�2 Network connection Ethernet port 1 / port 2 ������������������������������������������������ 11
7�2�1 Factory setting of the Ethernet parameters ���������������������������������������� 11
7�3 Process connections IO-1 ��� IO-4 ���������������������������������������������������������������12
7�4 Functional earth connection ������������������������������������������������������������������������13
7�4�1 Mounting on DIN rail���������������������������������������������������������������������������13
7�4�2 Mounting plate ������������������������������������������������������������������������������������13
8 Operating and display elements ������������������������������������������������������������������������14
8�1 Reset to factory settings ������������������������������������������������������������������������������14
8�2 LED indicators ���������������������������������������������������������������������������������������������14
8�2�1 LED AUX ��������������������������������������������������������������������������������������������14
8�2�2 LED Ethernet port 1 / port 2����������������������������������������������������������������15
8�2�3 LED SF �����������������������������������������������������������������������������������������������15
8�2�4 LED BF �����������������������������������������������������������������������������������������������15
8�2�5 LEDs IO1 ��� IO4 ���������������������������������������������������������������������������������16

3
UK
Licences and trademarks
Microsoft® und Internet Explorer® are registered trademarks of Microsoft
Corporation� All trademarks and company names are subject to the copyright of
the respective companies�
8�2�6 Special device LED indications ����������������������������������������������������������18
9 Technical data����������������������������������������������������������������������������������������������������18
9�1 Data sheets �������������������������������������������������������������������������������������������������18
9�2 Device manual���������������������������������������������������������������������������������������������18
10 Scale drawing ��������������������������������������������������������������������������������������������������19
11 Maintenance, repair and disposal ��������������������������������������������������������������������19
12 Approvals/standards ����������������������������������������������������������������������������������������19
12�1 Radio approvals�����������������������������������������������������������������������������������������20
12�1�1 Overview�������������������������������������������������������������������������������������������20
12�1�2 Europe / EC declaration of conformity����������������������������������������������20

4
1 Preliminary note
Technical data, approvals, accessories and further information: www�ifm�com
1.1 Symbols used
►Instructions
> Reaction, result
[…] Designation of keys, buttons or indications
→Cross-reference
Important note
Non-compliance may result in malfunction or interference�
Information
Supplementary note
1.2 Warnings used
NOTE!
Kind and source of the hazard
> Damage to property may result�
►Actions to refrain from�
►Measures to take�
1.3 Copyright and trademarks
© All rights reserved by ifm electronic gmbh� No part of these instructions may be
reproduced and used without the consent of ifm electronic gmbh�
All product names, pictures, companies or other brands used on our pages are the
property of the respective rights owners�
2 Safety instructions
• The device described is a subcomponent for integration into a system�
- The manufacturer is responsible for the safety of the system�
- The system manufacturer undertakes to perform a risk assessment and to
create a documentation in accordance with legal and normative requirements
to be provided to the operator and user of the system� This documentation
must contain all necessary information and safety instructions for the operator,

5
UK
the user and, if applicable, for any service personnel authorised by the
manufacturer of the system�
• Read this document before setting up the product and keep it during the entire
service life�
• The product must be suitable for the corresponding applications and
environmental conditions without any restrictions�
• Only use the product for its intended purpose (→ Functions and features).
• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur�
• The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator�
• Installation, electrical connection, set-up, operation and maintenance of the
product must be carried out by qualified personnel authorised by the machine
operator�
• Protect the device and the cables against damage�
• Use the device outside petrol stations, fuel depots, chemical plants or blasting
operations�
• Do not transport and store any flammable gases, liquids or explosive
substances near the device�
• Operation of the device can affect the function of electronic devices that are not
correctly shielded�
- Disconnect the device in the vicinity of medical equipment�
- Contact the manufacturer of the corresponding device in case of any
interference�
• Because of the requirements for electromagnetic interference emissions, the
device is intended for use in industrial environments� The device is not suitable
for use in domestic areas�
• Device safety: Use the device indoors only�
3 Functions and features
The RFID evaluation unit DTE105 integrates an Ethernet TCP/IP interface and 4
channels for the connection of field devices� Each channel can be used either for
the connection of an RFID antenna or as input/output to IEC 61131�

6
The device
• controls the data exchange to the RFID antennas or the sensor/actuator level�
• communicates with the higher-level control level via the ifm IoT Core protocol�
• allows device configuration via a web server�
Application examples:
• Material flow control in production lines
• Warehouse management by the automatic detection of stored products
• Tank management, order picking or product tracking
3.1 Configuration via Ethernet interface
• 10 Mbps and 100 Mbps
• TCP/IP - Transport Control Protocol / Internet Protocol
• ifm IoT Core protocol in JSON format
• IT functionality: HTTP server
• M12, twisted pair
3.2 RFID antennas
The device supports up to four RFID read/write heads of type ANT41x / ANT51x /
ANT60x from ifm electronic gmbh�
Accessories and further information: www�ifm�com
4 Items supplied
• RFID evaluation unit DTE105
• Installation instructions
The device is supplied without installation and connection accessories�
In the event of incomplete or damaged items supplied, please contact ifm
electronic�
5 Function
You can find detailed information about the function of the system in the device
manual at: www�ifm�com

7
UK
6 Installation
6.1 Installation distance
Due to the internal heating of the device a minimum distance to other objects of
10 mm is to be taken into account during installation�
A = 10 mm

8
6.2 Installation position
The installation position can be freely selected�
In a wet environment upside-down mounting is not permitted�
6.3 Mounting options
6.3.1 Mounting on DIN rail
The device can be installed on a DIN rail of type NS35/15 or NS35/7�5�
1� Angle the device and place the fixing clamp onto the upper edge of the DIN rail�
2� Press the device down�
3� Simultaneously rotate the device in the direction of the DIN rail�

9
UK
6.3.2 Removal
1� Press the device down�
2� Simultaneously rotate the device away from the DIN rail�
3� Remove the device from the top�
6.3.3 Mounting plate
The device can be fixed to the mounting plate using 2 screws (M4 x 35 or longer).
M4 M4
This installation mode is recommended for vibration and shock
requirements�

10
7 Electrical connection
The unit must be connected by a qualified electrician�
►Disconnect power before connecting the device�
►Observe the national and international regulations for the installation of
electrical equipment�
►Ensure voltage supply to EN 50178, SELV, PELV�
►Connect the device according to the indicated pin connection�
►A total current consumption of the device of 3 A must not be exceeded�
NOTE!
The IP rating indicated in the data sheet is only guaranteed if the
M12 connectors are firmly screwed�
The unit can be damaged by insufficiently tightened M12
connectors�
►Firmly screw the M12 connectors to the device�
Accessories and further information: www�ifm�com
Accessories ifm article number
Protective cap E73004
Torque wrench E70390
7.1 AUX voltage supply
►Connect the device to the voltage supply using an M12 connection cable�
3
12
4
5
Pin Connection
1 24 V DC
2 not used
3 0 V
4 not used
5 not used
Table of contents
Other IFM RFID System manuals









































