Idutex DS810 User manual

 Table of Contents 
 
Statement.............................................................................................. 1 
1 Agreement................................................................................... 1 
2 Copyright information ................................................................. 1 
3 Disclaimer.................................................................................... 2 
4 Safety Information....................................................................... 2 
4.1 Inspection Precautions ..................................................... 3 
Product description ............................................................................. 6 
1 Product Overview ........................................................................ 6 
2 Differences of DS810 & DS810 Plus............................................. 7 
3 VCI Model for DS810 ................................................................... 9 
4 VCI Model for DS810 Plus.......................................................... 11 
5 Host Model ................................................................................ 14 
6 The Product Specifications ........................................................ 16 
Product software introduction.......................................................... 18 
1 Diagnosis.................................................................................... 18 
2 Hot function............................................................................... 22 
3 Update ....................................................................................... 24 
4 Data Manager............................................................................ 26 
5 Quick Support............................................................................ 26 
6 DTC Query.................................................................................. 27 
7 Feedback.................................................................................... 28 
8 Settings ...................................................................................... 29 
Product activation.............................................................................. 33 
Cleaning and maintenance and warranty...................................... 36 
1 Cleaning and maintenance ........................................................ 36 
2 Warranty.................................................................................... 37 

1 Statement

You must carefully read the instruction manual, especially the

safety instructions, before you can connect, commission and

operate the products of IDUTEX TECHNOLOGY CO., LTD., Ltd.

(hereinafter referred to as “IDUTEX”).

1.1 Agreement

Once the product is used, it is an endorsement of the following:

(1) Please refer to the packing list of the random distribution for the

configuration equipment of this product, whichever is the actual

product;

(2) The functions and pictures described in this manual are subject

to the actual software. All information, specifications and

illustrations in the manual are the latest information at the time of

publication. The company reserves the right to change it without

notice.

1.2 Copyright information

It cannot be copied or stored in any form(electronic, mechanical,

photocopying, recording or otherwise) without prior written

permission being secured from IDUTEX. Software and data are

owned by technology and protected by copyright laws, international

contract law, and other national laws. It is strictly forbidden to copy

or transfer the data and software or some of the contents. If there is

any violation, the technology will be held legally responsible

according to law.

1.3 Disclaimer

(1) This manual only provides the operation and operation methods

for DS810 / DS810 Plus. The company does not assume any

responsibility for the consequences caused by using the operation

methods for other equipment operations.

(2) The company shall not accept any responsibility for accidents

caused either by the user personally or anyone else, or costs and

expenses due to equipment damages including equipment loss

caused by the user’s abuse or misuse, arbitrary changes or repairs

or operation of the equipment in a manner not in accordance with

the manual requirements.

1.4 Safety Information

For the safety of yourself and others, and to avoid damage to

equipment and vehicles, all personnel handling the equipment must

read the safety precautions mentioned in the manual.

1.4.1 Inspection Precautions

(1) DS810 / DS810 Plus can only be connected to a safety outlet

that is grounded. Before connecting, check and confirm that the

diagnostic circuit is in good condition. Otherwise, it is not necessary

to test to avoid damage to the main unit. If necessary, use a

multimeter to measure the diagnostic seat voltage.

(2) Use only the power cord supplied with the IDUTEX diagnostics

or detected power line.

(3) Pay special attention to the effects or damage caused by

environmental factors such as acid and alkali, poison gas, and

heavy pressure.

(4) Exhaust gases from the engine contain a variety of toxic

compounds and should be avoided. Park the vehicle in a well

ventilated area before operation.

(5) Do not place the device on the vehicle's power distribution unit.

Strong electromagnetic interference can cause damage to the

equipment.

(6) After the equipment is installed successfully, before starting the

engine, make sure that the parking brake is pulled and the speed

lever is placed in the neutral or parked position to avoid accidents

when the vehicle is started.

(7) When the engine is running at a high temperature, avoid contact

with high temperature components such as the water tank and the

exhaust pipe. At the same time, be careful of the voltage generated

by the components such as the ignition coil, the distributor cover,

the ignition circuit and the ignition plug during engine operation.

1.4.2 Notes on the use of the instrument

(1) This instrument is a precision electronic instrument. Do not drop

it. Handle it as gently as possible, away from heat and

electromagnetic fields.

(2) Ensure that the instrument and diagnostics are well connected

so that signal interruptions do not affect the test.

(3) Use screws as much as possible when using the cables and

connectors to avoid disconnecting and damaging the connectors

when moving. Hold the front end of the connector when pulling the

connector, and avoid pulling the rear cable to avoid damage to the

diagnostic interface.

(4) When the electrical components are energized, the circuit

cannot be disconnected to prevent self-inductance, mutual

inductance and current sensors and the vehicle ECU.

(5) The operation of this instrument requires a certain basis for

vehicle inspection and maintenance, and has a certain

understanding of the electronic control system of the vehicle under

test.

1.4.3 Operating car ECU considerations

When performing diagnostic operations on a vehicle equipped with

a computer control system, the following should be noted:

(1) Do not place magnetic objects such as radio speakers close to

the computer, as the magnetic properties of the speakers can

damage the circuits and components in the ECU.

(2) When the ignition switch is turned on, the internal electrical

equipment of the car must not be disconnected. Due to the

self-inductance of the coil when disconnected, a high instantaneous

voltage will be generated, which will cause damage to the sensor

and ECU;

(3) When performing repairs near a computer or sensor, special

care should be taken to avoid damage to the ECU and sensor;

(4) When carrying out maintenance work on or near the

ECU-controlled digital meter, be sure to wear a metal strap with one

end clamped to the body and the other end wrapped around the

wrist;

(5) When performing welding work on a car, the ECU system power

should be turned off beforehand;

(6) Do not use test lights to test ECU-related electrical devices to

prevent damage to the ECU or sensor unless specifically stated;

(7) Test ECU and sensors cannot be tested with a pointer-type

ohmmeter, unless otherwise specified in the test procedure, but

should be tested with a high-impedance digital meter.

2 Product description

2.1 Product Overview

DS810 / DS810 Plus is a proffessional efficient and convenient

diagnistic tool for passenger car.

Powerful quad-core Cortex-A53 2.0GHz processor with faster

2GB LPDDR4 and reliable 32GB On-board memory

Android 10.0 OS running on 8.0 inch IPS Multi-touch

capacitive touch screen

Unique ergonomic design with rubberized outer protection and

a rugged internal housing

Built-in rechargeable lithium-polymer battery for up to 10 hours

of continuous operation

OE-Level full-systems coverage for more than 80 vehicle

makes

Supporting 15(DS810) / 25(DS810 Plus) most commonly used

service Reset Functions, more to cover soon

Remote Technical Support via Teamviewer

11 OBDI connectors for old vehicle model for DS810 Plus

2.2 Differences of DS810 & DS810 Plus

Differences

DS810

DS810 Plus

VCI

Small VCI

Big VCI

Connector

OBDII

OBDII + 11 OBD1

Connectors

Service Reset Function

DS810

DS810 Plus

OILREST

ABS BLEEDING

BATTERY

DPF

EPB

INJECTOR

SAS

THROTTLE

TPMS

IMMOKEYS

AT SETTING

GEAR

HEADLIGHT

SUSPENSION

SUNROOF

A/F SET

This manual suits for next models

Table of contents

Other Idutex Diagnostic Equipment manuals

Idutex

Idutex PU630 User manual

Popular Diagnostic Equipment manuals by other brands

Mindray

Mindray M7Vet Operation note

Autel

Autel MaxiProgrammer 201 manual

TEXA

TEXA TMD2 installation manual

Autel

Autel MaxiIM IM608 manual

Sealey

Sealey BT2012 instructions

Diagnoptics

Diagnoptics Age Reader Instructions for use

LAUNCH TECH

LAUNCH TECH X-431 PRO5 user manual

Hella Gutmann

Hella Gutmann Mega macs X quick start guide

Foxwell

Foxwell I80TS manual

KaVo

KaVo 3D eXam Operator's manual

ATEQ

ATEQ VT46 user guide

Hella Gutmann

Hella Gutmann mega macs X user manual

Autel

Autel MaxiFlash VCMI manual

Qiagen

Qiagen QIAcube Connect MDx user manual

Alber

Alber BDSU installation guide

St. Jude Medical

St. Jude Medical QUANTIEN Instructions for use

Bosch

Bosch DCU 100 Original instructions

Launch

Launch CNC-602A user manual