9
⚫Note that material deterioration or screen coating degradation may occur if the display unit
is ex-posed to a volatile solvent, such as alcohol, thinner, benzine or insecticide, or if
prolonged contact is maintained with rubber or vinyl materials.
Carrying and moving
⚫Be sure to always carry the LED TV by two people holding it with two hands, one hand on
each side of the LED TV. If you carry the unit in a manner other than that specified, it may
drop and a serious injury may be caused.
Servicing
Do not open the cabinet or remove the rear cover of the unit. If any of the following conditions
occurs, unplug the AC power cord from the AC outlet, and contact qualified service personnel.
⚫When the power cord or plug is damaged.
⚫When the LED panel is damaged.
⚫When the liquid is spilled on the unit or when objects have fallen into the unit.
⚫When the unit has been exposed to rain or water.
⚫If the unit has been dropped or the cabinet has been damaged in any way.
⚫If the unit does not work properly even after you have referred to the TROUBLESHOOTING
section
Replacement parts
⚫In case the unit needs replacement parts, make sure that the service personnel uses
replacement parts specified by the manufacturer, or those with the same characteristics
and performance as the original parts. Use of unauthorized parts can result in fire, electrical
shock and/or other danger.
⚫Upon completion of service or repair work, request the service technician to perform safety
checks to ensure that the unit is in proper operating condition.
WARNING: Excessive sound pressure from earphones and headphones can cause hearing
loss.
Other notices
⚫Sometimes, the image may have some tiny red, green, blue, white or black spots. This is
normal and does not affect the performance of the LED TV.
⚫Due to advanced technology of the LED TV, giving you fine picture details. Occasionally, a
few non-active pixels may appear on the screen as a fixed point of blue, green, or red.
Please note that this does not affect the performance of your LED TV.
⚫If the unit is used in a cold place, a smear may occur in the picture or the picture may
become dark. This does not indicate a failure. These phenomena improve as the
temperature rises.
⚫In some case, residual images may remain after the short-term display of still images is
displayed. These will disappear in a few minutes, and the display will return to normal.
⚫LED panel are made of finely processed glass, so please avoid pushing hands or a strong
impact on the panel. It may cause damage to the LCD cells, and/or there is danger of glass
breakage.
⚫Do not use immediately after moving from a low temperature to a high temperature
environment, as this causes condensation, which may result in fire, electrical shock or other
danger.
