Idex GX300 User manual
1
Manual GX300
IDEX India Pvt. Ltd.
Survey no: 256, GIDC Manjusar
Savli, Dist.: Vadodara
391 770, India
V 7.0 29‐10‐2021
2
© Fast & Fluid Management B.V.
This manual or parts thereof may not be reproduced, stored ina retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, photocopying, recording, nor otherwise, without the prior written permission of Fast & Fluid
Management B.V.
This manual could contain technical inaccuracies or typographical errors.
Fast & Fluid Management B.V. reserves the right to revise this manual from time to time in the contents thereof without the
obligation of Fast & Fluid Management B.V. to notify any person of such revision or change.
Details and values given in this manual are average values and have been compiled with care. They are notbinding, however,
and Fast & Fluid Management B.V. disclaims any liability for damage or detriments suffered as a result of reliance on the
information given herein orthe use ofproducts, processes orequipmentto which this manualrefers. No warrantyismade that the
use of the information or of the products, processes or equipment to which this manual refers will not infringe any third party's
patents or rights. The information given does not release the user from making their own experiments and tests.
3
Table of Contents
GX300
Table of Contents
1 About this manual........................................................................................................5
1.1
How to work with the manual ......................................................................................... 5
1.2
Record of changes …………………………………………………………………………….. 5
2 Safety.............................................................................................................................6
2.1
Intended use.................................................................................................................. 6
2.2
Liability........................................................................................................................... 6
2.2.1
General liability................................................................................................... 6
2.2.2
Machine-specific liability..................................................................................... 6
2.3
User qualification for installation..................................................................................... 7
2.4
Safety symbols on the machine ..................................................................................... 7
2.5
Labels on the machine................................................................................................... 7
2.6
Safety symbols in the manual ........................................................................................ 8
2.7
Disposal of the machine................................................................................................. 8
3 Operator manual...........................................................................................................9
3.1
Description..................................................................................................................... 9
3.1.1
Overview of the machine.................................................................................... 9
3.1.2
Overview of the control panel........................................................................... 10
3.1.3
Overview of the program keys.......................................................................... 10
3.1.4
Type plate: serial number................................................................................. 12
3.2
Operation..................................................................................................................... 12
3.2.1
Turning on the machine - if the cradle is in the correct position........................ 12
3.2.2
Turning on the machine - if the cradle is not in the correct position .................. 12
3.2.3
Turning on the machine when the machine is in hibernation ............................ 13
3.2.4
General mixing procedure................................................................................ 13
3.2.5
Placing the can ................................................................................................ 14
3.2.6
Start the machine............................................................................................. 15
3.2.7
Remove the can............................................................................................... 16
3.2.8
Move the can plates manually.......................................................................... 16
3.2.9
Adjust the mixing time during operation............................................................ 16
3.2.10
Adjust the mixing speed during operation......................................................... 17
3.2.11
Stop the operation manually............................................................................. 17
3.2.12
Using the emergency stop switch..................................................................... 17
3.2.13
Restart the machine......................................................................................... 17
3.3
Maintenance................................................................................................................ 18
3.3.1
General safety instructions for maintenance..................................................... 18
3.3.2
General cleaning: after every operation............................................................ 18
3.3.3
Periodic maintenance: weekly.......................................................................... 18
3.3.4
Periodic maintenance: monthly ........................................................................ 18
3.4
Remove spilled paint.................................................................................................... 18
4
Table of Contents
GX300
4 Installation ..................................................................................................................19
4.1
Unpack the machine.....................................................................................................19
4.1.1
Remove the cardboard.....................................................................................19
4.1.2
Remove the protection and foil.........................................................................19
4.1.3
Remove the transport brackets.........................................................................20
4.2
Put the machine in position ..........................................................................................20
4.2.1
Put the machine in position..............................................................................20
4.2.2
Make a ramp of the pallet.................................................................................21
4.2.3
Move the machine from the pallet.....................................................................21
4.3 Move the machine in the position
4.3.1 Move the machine to final location…..……………………………………………..22
4.3.2 Level the machine...........................................................................................22
4.4. Finish the installation ....................................................................................................23
5 Troubleshooting.........................................................................................................24
5.1 General troubleshooting procedure ...............................................................................24
5.2 Opening solenoid lock manually…………………………………………………..…………..24
5.3 Contact service..............................................................................................................24
5.4 Error messages and other faults....................................................................................24
5.4.1 Easy-to-solve errors.........................................................................................25
5.4.2 Clamp plate errors............................................................................................25
5.4.3 Inverter errors...................................................................................................25
5.4.4 Software errors..................................................................................................26
6 Technical data.............................................................................................................27
6.1 General specifications..................................................................................................27
6.2 Dimensions and mass..................................................................................................27
6.3 Ambient conditions.......................................................................................................27
6.4 Noise level ...................................................................................................................28
6.5 Safety classifications....................................................................................................28
6.6 Electrical specifications................................................................................................28
6.7 Electrical diagram ……………………………..……………………………………………….29
5
About this manual
GX300
1 About this manual
The manual shows the information necessary to:
- install
- operate
- perform basic maintenance
- correct small problems
The GX300 and all its versions are referred to in the manual as the 'machine'.
This manualcontains the original instructions. The originallanguage ofthemanualis English.Allother language
versions are translations of the original instructions.
1.1
How to work with the manual
For the safe use of the machine, it is important:
1 Tofamiliarize yourself with the structure and content.
2 Toread the safety chapter in detail and make sure you understand all the instructions. See chapter 2.
3 Tocarry out the actions completely and in the given sequence.
1.2
Record of changes
Edition
Editor
Check
Date
Description
1.0
PHS
SG
May 2020
1st edition
2.0
PHS
SG
Jan 2021
2nd edition (3.3.3- Periodic Maintenance updated,
5.3.1- E00 E11 deleted, E08 updated)
3.0
PHS
SG
Feb 2021
3rd edition (3.2.5 Retain the candle handle note & 6.7 wire
Diagram is updated.)
4.0
PHS
SG
July 2021
Errors 38,39,47,Wiring Diagram with Transformer are updated
5.0
PHS
SG
Aug 2021
3.2.3, 3.2.8 are updated
6.0
PHS
SG
Sept 2021
5.2 is added
7.0
PHS
SG
Oct 2021
5.2 is updated
6
Safety
GX300
2 Safety
WARNING
Read the manual before you install or use the machine. Failure to do so can result in personal
injury, death or property damage.
2.1
Intended use
The machine is designed to mix paint in a can. Any other use of the machine is strictly forbidden.
2.2
Liability
2.2.1 General liability
Fast & Fluid Management B.V. will not accept any responsibility in case of modifications to machines and/or
accessories.
Fast & Fluid Management is not liable if you do not follow the rules below:
- The machine is for indoors use only.
- This machine may only be used for commercial settings. The machine is not a household appliance.
- Observe all local safety regulations.
- Strictly obey the safety instructions in this manual.
- Mind the minimal requirement of the building structure of the load capacity of the floor.
- Place machine in a well-lit and well-ventilated room.
- Install and connect the machine according to the instructions in thismanual.
- Connect the machine to a grounded wall socket.
- Do not use extension cords or inadequately rated power cables.
- Make sure that the power cable is freely accessible.
- Do not place objects on top of the machine.
- Keep lids, panels, and covers closed and in place whenever possible.
- Do not use a damaged machine. When you have doubts, contact your supplier. See §5.3.
- Keep the machine in good condition.
- Clean the machine at the intervals and when dirty.
- Make sure that defective parts are immediately replaced.
- Remove spilled liquids immediately, and unplug the machine in case of large spillages (> 500mL).
- Replace parts only with original Fast & Fluid Management B.V.spare parts.
All maintenance beyond the scope of this manual must be carried outby a qualified service technician that Fast
& Fluid Management has trained and certified.
2.2.2 Machine-specific liability
The machine cannot be used in an environment where explosive vapours may occur (ATEX zone). Colorants
that contain flammable solvents can be mixed, as long as they are packed in a suitable UN approved container.
Please consult the health & safety officer of your paint supplier and/or colorant supplier on how to avoid the
emergence of hazardous situations like personal harm or the risk for fire and explosion.
7
Safety
GX300
- Personal harm should be avoided by strictly following the materials safety data sheets (MSDS) for colorants
and (base) paint.
- The use of flammable colorants or colorants that diffuse potential explosive vapors may present fire and
explosion risks.
2.3 User qualification for installation
Only install the machine when you are a qualified service technician who is trained and certified by Fast & Fluid
Management B.V.
2.4 Safety symbols on the machine
Read the manual. Electrical hazard. Read the manual.
Central earthing point. Pinch hazard.
Electrical hazard. Rotating parts.
On-Off
2.5 Labels on the machine
Upper shield instruction.
When can diameter > Ø39 cm : remove shield
Multican
8
Safety
GX300
2.6 Safety symbols in the manual
WARNING
Can cause personal injury. WARNING
Pinch hazard.
CAUTION
Can cause damage to themachine. Note
Shows further information.
2.7 Disposal of the machine
1. Sort the machine, the accessories and the packaging for
environmentally friendly recycling.
2. Do not dispose of the machine into domestic waste. Dispose
of the machine according to localregulations.
9
Operator manual
GX300
3 Operator manual
3.1
Description
3.1.1 Overview of the machine
A: Can Plate (Top) E: Emergency Switch I: Drain Orifice
B: Can Plate (Bottom) F: Control Panel J: Can Table
C: Door G: Casing K: Net Entry
D: Top Cover H: Adjustable Foot L: On/Off switch
10
Operator manual
GX300
3.1.2 Overview of the control panel
`
A: Emergency stop switch
B: Program keys.
Note
The display shows the program menu with the multiple functions of the program keys.
3.1.3 Overview of the program keys
Ready for use
When the machine is ready for use, the display shows the available programs.
A: T1 key (mix time 1) D: Program key
B: T2 key (mix time 2) E: Stop key
C: T3 key (mix time 3)
Note
The function of the T1 to T3 keys changes when you adjust the default values of the
machine.
Table of contents
Other Idex Mixer manuals
