idatastart TR1150A User manual
OWNER’S
MANUAL
®/MD
HCX/HC1/HC2
INSTRUCTIONS EN FRANÇAIS AU VERSO
FCC COMPLIANCE
This device complies with FCC rules, and is subject to the following conditions:
(1) This device may not cause harmful interference.
(2) This device may accept interference received, including interference that may cause undesired operation.
INDUSTRY CANADA COMPLIANCE
This device complies with the RSS-210 Radio Standards Specification from IC.
NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate this device.
IDSOG201505
2IDATASTART OWNER’S GUIDE
CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM
WELCOME TO IDATASTART
Congratulations on the purchase of your iDataStart remote start system. Please take a moment to review the
following table of contents to help you quicly access the information you need.
iDataStart remote overview 3
iDataStart remote functions & confirmations 4-6
Programming a new iDataStart remote 6
Replacing iDataStart remote batteries 7
Remote starting from your factory key fob 7
Adjusting engine runtime settings 8
Key takeover following remote start 8
When servicing your vehicle (Valet Mode) 9
Remote start troubleshooting 10
Vehicle shutdown troubleshooting 11
Limited lifetime warranty 12
Headquartered in Montreal, Canada, Automotive Data Solutions Inc. (ADS) is a privately held company specialized in the
development and marketing of remote start and audio integration solutions destined for the automotive aftermarket. ADS’
award-winning products (marketed under the iDatalink®, iDatalink Maestro® and iDataStart® brands) are sold and installed
through a network of Authorized Dealers across North America, South America, Europe and Russia. For more information
about ADS’ products and services, visit www.adsdata.ca.
IDATASTART OWNER’S GUIDE 3
CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM
IDATASTART REMOTE OVERVIEW
Your iDataStart remote start system may include one or both long-range remotes listed below. Please take a
moment to familiarize yourself with their general features.
REMOTE MODEL TR1150A TR2350AC
Technology FM 1-WAY FM 2-WAY
Max. Range 3000 feet 3000 feet
Buttons 5 5
Transmit Confirmation (TX) Top LED Top LED
Receive Confirmation (RX) -- Button LED + Chime
Batteries Required 2 x CR2016 1 x CR2450
Avg. Battery Life 24 months 6-12 months
Warranty 1 year 1 year
TOP LED (TX)TOP LED (TX)
BUTTON LED (RX)
BUTTONBUTTON
CASING
RELEASE
CASING
RELEASE
4IDATASTART OWNER’S GUIDE
CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM
IDATASTART REMOTE FUNCTIONS & CONFIRMATIONS
Thanks to their multiplexing technology, iDataStart remotes can pack over 30 functions using only 5
buttons. In order to get the most out of your remotes, please take a moment to get acquainted with
the following functions below:
NOTES:
1. All functions must be enabled by an Authorized Dealer during installation to be functional on remote
2. Non-highlighted icons = Press & release button
3. Highlighted (grey) icons = Press & hold button for 2.5 seconds
4. Coma (,) between icons = Press buttons one after the other
5. Plus (+) between icons = Press buttons together
6. Timeout between each button press = 3 seconds
7. Function* = Available in 2nd Car Mode
8. Confirmations are only available with 2-way remote
BUTTONS FUNCTION CONFIRMATION 2WAY ONLY FUNCTION DESCRIPTION
Lock & Arm* 1 chime + 1 flash Secures your vehicle by locking the doors
and arming the alarm.
Unlock &
Disarm* 2 chimes + 2 flashes Access your vehicle by unlocking the doors
and disarming the alarm.
--
Query*
Panic* 1 chime + 1 flash Triggers the panic siren.
AUX 5* To be completed by Authorized Dealer if applicable
Trunk Release Releases the trunk or hatch.
IDATASTART OWNER’S GUIDE 5
CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM
BUTTONS FUNCTION CONFIRMATION 2WAY ONLY FUNCTION DESCRIPTION
Engine Start/
Stop*
4 chimes + 4 flashes
(Button LEDs will also flash
intermittently while engine is
running)
Starts and stops the engine.
,AUX 1 To be completed by Authorized Dealer if applicable
,AUX 2 To be completed by Authorized Dealer if applicable
,AUX 3 To be completed by Authorized Dealer if applicable
,AUX 4 To be completed by Authorized Dealer if applicable
, , *2nd Car Mode
Controls two iDataStart-equipped vehicles
using one remote. Works with all functions
marked with an asterisk (*).
,Silent Lock* Disables the vehicle’s horn and alarm siren
when pressing the ‘Lock’ button.
,Silent Unlock* Disables the vehicle’s horn and alarm siren
when pressing the ‘Unlock’ button.
, + Valet Mode
ON/OFF
1 chime ON
2 chimes OFF
Turns off remote start and security
features when servicing your vehicle or
valet parking. Keyless entry features will
remain functional.
, Runtime Extend Seamlessly extends your engine runtime
without restarting your vehicle.
, + Mute
ON/OFF
1 chime ON
2 chimes OFF
Disables the vehicle’s horn and alarm siren
even when alarm is triggered. Remote will
still receive alarm notification.
, + Shock Sensor
ON/OFF
1 chime ON
2 chimes OFF Disables shock sensors if installed.
6IDATASTART OWNER’S GUIDE
CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM
BUTTONS FUNCTION CONFIRMATION 2WAY ONLY FUNCTION DESCRIPTION
, + Ignition Lock
ON/OFF
1 chime ON
2 chimes OFF
Automatically locks doors when engine is
running.
, + Passive Lock &
Arm ON/OFF
1 chime ON
2 chimes OFF
Automatically locks & arms your vehicle 60
seconds after you unlock it.
, + Turbo
ON/OFF
1 chime ON
2 chimes OFF
Cool down your turbo before turning the
engine off. Programmable runtime from 1
to 4 minutes.
, + Weather Start
ON/OFF
1 chime ON
2 chimes OFF
Set your vehicle to automatically remote
start every 2, 3 or 4 hours (programmable)
or from a temp. sensor sold separately.
,,, Lock Remote 1 chime + 1 flashe
Disables all functions on your remote.
Pressing a button will generate 6 chimes +
6 flashes. Available with 2-way remote only.
,,, Unlock Remote 2 chimes + 2 flashes Enables all functions on your remote.
Available with 2-way remote only.
,,, Mute Remote
ON/OFF
1 chime ON
2 chimes OFF
Disables the chime when pressing any but-
ton on your remote. Available with 2-way
remote only.
PROGRAMMING A NEW IDATASTART REMOTE
Are you replacing a lost or damaged remote or simply adding an extra remote to your iDataStart system?
Please take note of the following:
1. A functional iDataStart system must already be installed in your vehicle.
2. All new remotes must be installed by an iDataStart Authorized Dealer.
3. A maximum of 4 remotes can be programmed to your iDataStart system.
IDATASTART OWNER’S GUIDE 7
CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM
REMOTE STARTING FROM FACTORY KEY FOB
Available on most vehicles, your iDataStart system will enable remote start functionality from your factory
key fob as follows:
BUTTON PRESS FUNCTION
3x rapidly Start engine
3x rapidly Stop engine
Remote start range will vary by key fob. If your iDataStart system does not include long range remotes,
you may still add iDataStart remotes (sold separately) at a later date. Ask your iDataStart Authorized
Dealer for details.
Follow the steps below to replace the batteries in your iDataStart remotes OR scan the QR code below to
view a video tutorial.
1. Insert a 25 cent coin into the hollow (bottom left) corner of your iDataStart remote.
2. Gently twist the coin until the casing pops open.
3. Use your coin to pry open the rest of the case perimeter.
4. Carefully temove the circuit board from the case.
5. Slide the old battery out of its enclosure and replace with the new battery.
6. Carefully replace the circuit board into bottom half of the casing.
7. Snap top and bottom casings back together using your hands.
REPLACING IDATASTART REMOTE BATTERIES
8IDATASTART OWNER’S GUIDE
CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM
ADJUSTING ENGINE RUNTIME SETTINGS
Once remote started from your factory key fob or long-range remote, your vehicle will run for the
programmed ‘runtime’ setting. The default runtime is 15 minutes but it can also be programmed for
3, 5, 10, 25, 30 or 35 minutes. If you wish to change your remote start runtime setting, contact your
iDataStart Authorized Dealer.
KEY TAKEOVER FOLLOWING REMOTE START
Available on some vehicles, the ‘key takeover’ procedure ensures that your engine does not turn off
when entering the car during the remote start runtime, following a remote start command. Follow the
instructions below or scan the QR code to view a video tutorial.
For Standard Key Vehicles
1. Unlock and enter vehicle
2. Close doors
3. Insert key into ignition and turn ignition to ON position
4. Press foot brake
For Push-To-Start Vehicles
1. Unlock and enter vehicle with valid smartkey
2. Close doors
3. Press foot brake
NOTE: To prevent your vehicle from shutting down, complete the steps below within the programmed
delay time (45 seconds, 90 seconds, 3 minutes or 4 minutes). Key takeover procedure may vary by
vehicle, ask your iDataStart Authorized Dealer for deatails.
IDATASTART OWNER’S GUIDE 9
CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM
WHEN SERVICING YOUR VEHICLE
To ensure safety during vehicle servicing, the remote starter must be placed in ‘Valet Mode’. The ‘Valet
Mode’ will disable remote start functionality. To activate or deactivate the ‘Valet Mode’, follow the
instructions below or scan the QR codes to view a video tutorial.
With Vehicle Key
FUNCTION ACTION # OF PARKING LIGHT FLASHES
Valet Mode ON Cycle ignition OFF/ON 2x rapidly,
then press brake 3x.
1
Valet Mode OFF 2
With iDataStart Remote
FUNCTION ACTION # OF PARKING LIGHT FLASHES
Valet Mode ON Turn ignition ON, then press
,+
1
Valet Mode OFF 2
With iDataStart Antenna
FUNCTION ACTION # OF LED & PARKING LIGHT FLASHES
Valet Mode ON Turn ignition ON, then press
& hold button for 5 seconds
1
Valet Mode OFF 2
10 IDATASTART OWNER’S GUIDE
CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM
REMOTE START TROUBLESHOOTING
If your iDataStart remote fails to start the vehicle, the parking lights will flash three times immediately,
then flash a number of times according to the errors below:
# OF PARKING LIGHT
FLASHES DIAGNOSTIC SOLUTION
3 + 1 Engine is already running Turn engine OFF
3 + 2 Key in ignition at ON position Remove key from ignition
3 + 4 Trunk is open Close trunk
3 + 5 Foot brake is ON Release foot brake
3 + 6 Hood is open Close hood
3 + 8 Tach failure Contact Authorized Dealer
3 + 10 System is in Valet Mode Exit Valet Mode
3 + 11 Can communication failure Contact Authorized Dealer
This manual suits for next models
3
Table of contents
Other idatastart Remote Starter manuals
idatastart
idatastart HC3 User manual
idatastart
idatastart HC2352AC User manual
idatastart
idatastart COM-IDS(RS)-BM1-EN User manual
idatastart
idatastart VW2410A User manual
idatastart
idatastart TR2650A User manual
idatastart
idatastart HC2352AC User manual
idatastart
idatastart CMVWXA0 User manual
idatastart
idatastart CMHCXA0 User manual
idatastart
idatastart ADS-BZ1 User manual
idatastart
idatastart TR2550A User manual
idatastart
idatastart BM1 User manual
![idatastart OEM-IDS(RS)-BM1-[ADS-BM1]-EN User manual](/data/manuals/21/6/2163b/sources/idatastart-oem-ids-rs-bm1-ads-bm1-en-manual.jpg "idatastart OEM-IDS(RS)-BM1-[ADS-BM1]-EN User manual")
idatastart
idatastart OEM-IDS(RS)-BM1-[ADS-BM1]-EN User manual
idatastart
idatastart VW2410A User manual
idatastart
idatastart VWX000A User manual
idatastart
idatastart HC2352AC User manual
idatastart
idatastart BM1 User manual
idatastart
idatastart HC1151A User manual
idatastart
idatastart ADS-BZ1 User manual
idatastart
idatastart ADS-CH4 User manual
idatastart
idatastart CMBMXA0 User manual
![idatastart COM-IDS(RS)-BZ3-[CMBMXA0]-EN User manual](/data/manuals/tz/p/tzpu/sources/idatastart-com-ids-rs-bz3-cmbmxa0-en-manual.jpg "idatastart COM-IDS(RS)-BZ3-[CMBMXA0]-EN User manual")
