ICW Elite User manual
1) Do not attempt to adjust your Elite arm until everything you intend to mount to
the arm is mounted.
2) Arm must be completely horizontal (extended) before adjusting the arms tension.
Failure to do so will damage the arm and void the warranty.
3) Never loosen or remove any of the shoulder bolts. Doing so will cause the
arm to immediately come apart with tremendous force, and could cause seri-
ous injury.
4) If equipment requiringAC power is mounted to this unit, have a certified electri-
cian inspect the installation.
5) Failure to install this unit according to these instructions will void all ICW warran-
ties. If installed incorrectly, ICW is not liable for any damage or injury caused by
the unit.
ICW Elite SingleArm Ceiling Mount
DANGER!
The Elite arm contains high pressure gas springs.
The following cautions MUST be observed to
avoid serious injury.
Shoulder bolt
Removetheceiling mount fromthebox, and findthe4 #14 woodscrews
inyourhardwarebag. Firmlysecurethe ceiling mount toasolidstud
intheceilingusingall4oftheprovidedscrewsand being sure the mount is
level.
Loosenset screwand thread arm onto
ceilingmount,tightensetscrew.
Findthe screws inthe end covers
andthelongcover.
2
Removethelong arm coverbyunscrewing the 26-32flathead screws
usinga philipsheadscrewdriver.
Removethe end coversby unscrewingthe 2 10-24
flatheadscrewsusing the 1/8” hexkey.
Runthecordsalong the armalltheway
throughthe cordchannelupintotheceilingmount.
Replacethe three coverson the arm,being
carefulnotto pinch thecords.
Feedthecordsthroughtheplastic bushing
intheendcovers. The plastic bushing can
beremoved, openedand slippedover
cordif necessary.
3
YourT-REXmountcomeswithauniversal
VESAthatwillaccommodatea75mmor
100mmmonitor.
Usethe buttons to
adjustthe tilt
ofyourmonitor.
Liftgentlyonthe
monitortofree
buttonsfrom the
monitorsweight.
Onceyourmonitor is mounted, extendand
adjustthe tensiononthe arm
usingthet-handleadjustmentwrench
provided.
Adjustmentport.
Thankyou for yourpurchase ofan ICWTitan Elitearm. Any questions pleasecall 1-800-558-4435
Attachyourmonitortothe
T-REX mountusing the4mm
screws in yourhardware bag.
Usethesliderhandletomoveyourmonitoralong
thesliderail.
Other ICW Rack & Stand manuals
ICW
ICW PRO SLIDE User manual
ICW
ICW SINGLE ARM ELITE User manual
ICW
ICW ELITE 5220 User manual
ICW
ICW GX170 User manual
ICW
ICW Ultra 110 Series User manual
ICW
ICW TITAN ELITE T2E12P-WT2-KUB User manual
ICW
ICW Elite User manual
ICW
ICW TITAN ELITE T2EQ-C8X5 User manual
ICW
ICW MD ARM User manual
ICW
ICW Elite User manual
Popular Rack & Stand manuals by other brands
Salamander
Salamander Acadia AC/W/L400/WH Assembly instructions
Fohhn
Fohhn VAT-09 Mounting instruction
ricoo
ricoo FS0522 quick start guide
AMSOIL
AMSOIL BMK-22 Installation and service instructions
Kargo Master
Kargo Master 48220 installation guide
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 installation instructions
