icetro ISM-72L User manual
User's Manual
ISM-72L (FROZEN BEVERAGE)
* This product is designed for indoor use.
* Make sure to install it indoors.
* The appearance, design, color, and parts of the product
are subject to change without prior notice.
2
Contents
1. Names of Parts …………………………………………………………………………… 3
2. Overview …………………………………………………………………………………… 4
3. Safety Signs, Symbols, and Labels ……………………………………………………… 4
4. Safety Instructions ………………………………………………………………………… 5
5. Installation Requirements ………………………………………………………………… 6
6. Safety Cautions for Operation …………………………………………………………… 7
7. Operation Procedure ……………………………………………………………………… 8
7.1 LCD DISPLAY Description ……………………………………………………… 9~12
7.2 Operations ……………………………………………………………………………… 13
7.3 Cleaning and sterilization procedure ………………………………………………… 14
7.3.1 Cleaning the product ……………………………………………………………… 15
7.3.2 Sterilizing the product ……………………………………………………………… 16
7.3.3 Assembling the product ……………………………………………………… 16~17
7.3.4 Sterilizing the site …………………………………………………………………… 17
8. Daily Check ………………………………………………………………………………… 18
8.1 Repairing the product ………………………………………………………………… 18
8.2 Updating the software and video …………………………………………………… 18
8.3 How to add video clips ……………………………………………………………… 19
9. Specifications ……………………………………………………………………………… 20
10. Circuit diagram …………………………………………………………………………… 21
11. Before Calling Service …………………………………………………………………… 22
12. Part list ……………………………………………………………………………… 23~25
3
1. Names of Parts
CANISTER COVER
Key
IMAGE PC
52
CANISTER
BASE CANISTER
PIN LEVER
TENSION BOLT
LCD
LEVER SHAFT
ICEBEER
SUPPLY
POWER SWITCH
USB PORT
LEVER
DRAIN BOX
DRAIN BOX
COVER
4
To become familiar with this product, be sure to read this manual carefully.
This product requires cleaning and maintenance activities as in other machines.
Any disassembly or cleaning mistakes may cause a product failure.
It is highly recommended for the person in charge to have immersion training for activities.
The warnings and safety instructions in this manual do not cover all possible conditions
and situations.
While operating, moving or cleaning this product, manipulate it carefully based
on common sense.
If a bad and non-understandable symptom happens, feel free to contact the purchased site
or service agency.
Danger
Warning
Caution
Caution
Important
This is the safety warning symbol. It is used to warn users of any potential
risk of injuries. To evade from the risk of injury or death, comply with the
safety requirements for the symbol.
If you neglect this symbol and wrongly use the product, it may cause death
or serious injury.
If you neglect this symbol and wrongly use the product, it may cause a
potential risk of death or serious injury.
If you neglect this symbol and wrongly use the product, it may cause a
potential risk of injury.
If you neglect this with no caution symbol and wrongly use the product,
it may cause a potential risk of property damage.
You must check the electrical rating on the nameplate of the product.
The nameplate isattached on the rear of the product.
The nameplate specification has priority over information in this manual.
The electric circuit diagram of the product is attached inside of the panel.
In addition, the product specification is subject to change without prior notice.
2. Overview
3. Safety Signs, Symbols, and Labels
5
4. Safety Instructions
Be sure to use the grounded
consent.
It may cause a failure or
electric shock.
Do not pull off the power
plug.
It may cause a failure or
electric shock.
Do not move the product
by pulling the power plug.
It may cause a failure or
electric shock.
Do not contact the power
plug with wet hands.
It may cause an electric shock
or fire.
Do not forcibly bend the power
plug or place any heavy material
on it.
It may cause an electric shock
or fire.
When the power plug is
removed from the outlet, insert
it after 5 minutes.
Otherwise, It may cause a
product failure.
Remove water or dust from
the power plug and insert
it fully into the outlet.
It may cause a fire or electric
shock.
When repairing the product or
replacing the parts, remove the
power plug from the outlet.
It may cause an electric shock
or fire.
When not using the product for
a long time, remove the power
plug from the outlet.
It may cause an electric shock or fire.
Do not connect multiple
products to
a single outlet.
It may cause a fire.
When the power plug is
damaged, do not replace it
arbitrarily and contact the
service agency.
It may cause an electric shock
or fire.
Do not connect the power
plug arbitrarily or nor modify
it.
It may cause an electric shock
or fire.
For your
information
■Use this product as described in the user manual.
- If you do not follow the instructions, it may cause an electric shock or property loss.
- When transferring the product to another person, transfer the user manual also.
- Before supplying power, check whether the voltage is the same as the one of the nameplate.
According to applicable electric code regulations and machine specifications, ground
the product and connect to the single phase power. If the product has no plug, install
the grounded plug to meet at least 10 A. For directly connecting the product to the main
power, connect the power cord to the 2 pole circuit breaker.
Never use the extension cord with no grounding.
6
5. Installation Requirements
Do not install the product
near the heat generating
source.
It may cause a fire.
Do not install the product
in a humid, dusty, or water
(e.g. rain) splashing place.
It may cause an electric shock
or fire.
Do not install the product near
combustible gases
or inflammable materials.
It may cause a fire.
When moving the product,
be careful not
to slip and fall.
It may cause an injury or
product damage.
Do not forcibly apply force or
shock to the product.
It may cause damage to the
product.
This product is for indoor use
only. So install the product
inside the house.
Keep at least 30 cm distance
for the side and rear of the
product.
Do not install the product
on a weak or uneven floor.
It may cause vibration
and noise.
Adjust the vertical balance of
the product not to shake and
then adjust the horizontal
balance.
Firmly fix the product.
Check any damage of the
product.
If found, contact the delivery
agency to request claims on it.
The drain hose is located
on the top of the drain box.
Caution!
This product is for indoor use only. So do not install the product outdoors. Inevitably, when
the product is installed outside, prepare a shade to block direct sunlight, rain, wind, and dust
for sanitary control and optimal performance. Install the product in the place where you can
easily manage it to prevent robbery and loss by dangerous play.
7
6. Safety Cautions for Operation
Keep away any flammable
materials.
▶It may cause a fire or explosion
due to electric spark.
If the product makes heavy noise or
does not operate properly, remove the
power plug and contact the service
agency.
▶It may cause an electric shock or fire
Do not use any flammable
spray such as pesticide
and air freshener
▶It may cause a fire.
Check the supplied power.
▶When the PVC coating of the power
cable is stripped off or the shunt
socket is used, it may cause a fire.
Operate the product in
a nonhumid place.
▶In a humid place, the product
easily gets rusty or has an
electric leak.
▶If the floor gets humid, wipe it
with soft cloth.
Do not use the product in the
ambient temperature of
5℃ or below for a long time.
▶It may cause a product failure.
Use the product in a well
vented place.
▶Gas or smoke can discolor
the surface of the product.
Be cautioned of gases!
◆When gas leak happens,
do not touch the product.
◆If you open the door or remove
the power plug, it may cause an
explosion due to spark.
▶Do not touch the product.
▶Fully close the gas burner.
▶Open the window for ventilation.
For food sanitation, clean and
sterilize the product every day.
▶Before cleaning, remove the
power plug from the outlet.
Do not spray water and wipe
the product with a clean wet
towel.
▶If you directly spray water,
it may cause an electric leak
or product failure.
Do not forcibly apply
force to the slush supply
lever nor hang on it.
▶It may cause damage to
the product.
Do not insert your finger or
other materials into the panel
rubber or the slush supply.
When the product is not
separated from the power
supply, do not clean the
product nor remove the
canister, spiral or panel.
Do not operate the product
while all panels are not well
fastened enough.
Caution
While operating the product, do not hold the product using the canister or evaporator drum.
The manufacturer assumes no responsibility for any damage caused by careless handling.
EVERYDAY
8
① Clean and sterilize the product according to the instructions in this manual.
See “7.3 Cleaning and sterilization procedure.”
② Fill up the liquid material up to the level specified on the canister. Do not overfill it.
The optimal quantity (in liter or gallon) is written on the surface of canister.
③ Turn on power by pressing the power button on the right side, and then press
SLUSH when "PRODUCT MENU" appears.
④ Product must stay powered on as freezing is automatically stopped when beer
is slushed. The spiral keeps rotating.
⑤ In case of using other materials such, contact the service agency or distributor
for inquiry.
⑥ Mount gutter on the bracket drain box and place the gutter cover.
7. Operation Procedure
Caution
This product must not be used by the persons with poor mental or physical condition, or
the persons without experience or knowledge (including children). If those persons use
the product, a responsible person must manage the use of the product. Guide children
not to play with the product.
Drain box up
Drain box
Bracket drain box
9
7℃ 7℃
① Startup screen
② SLUSH screen
③ REFRIGERATION menu
Progress bar
Software version
Press the power switch on the side of the machine
and the loading screen appears on the LCD window.
Select the product type (slush) to open
the operation screen.
Press the ‘REFRIGERATION’ button to open
the screen.
7.1 LCD DISPLAY Description
Ingredient
temperature
button
Operate
/Stop
Switch to
previous
menu button
Shortcut to
main menu
④ Lamp ON/OFF screen
Temperature control
button
5℃ 5℃ 5℃ 5℃5℃ 5℃
This menu appears when the loading is complete.
Ice beer
generation
button
Product cleaning
button (It activates
the spiral only.)
Configuration
button
Lamp ON/OFF
button
Refrigerating
button
ON/OFF the advertisement backlight.
ON/OFF the backlight for front advertisement and ingredient tank.
Switch to
previous
menu button
Press the ingredient temperature button to
set the temperature.
(Applied only after pressing the "Switch to previous
menu( )" button)
Press the ingredient temperature button to
set the temperature.
(Applied only after pressing the "Switch to previous
menu( )" button)
10
Press the setting button on the menu to change
various setting values.
Press the control button on the setting menu
and the 'SLUSH' button will show up.
Select one and you can choose setting
by 'TORQUE' or by 'TEMPERATURE'.
Press the ‘DATE’ button to set the current date and time.
Enter the year, month, date, hour and minutes by touching
each part using the ‘+’ and the ‘-’buttons.
Press the ‘ENTER’ button after setting.
(These values should be adjusted to avoid errors when using
the ‘AUTO REFRIGERATION’ function.)
Press the SLUSH button to select between left
and right.
Select the ‘TEMPERATURE’ button to set
the managing temperature. (When selecting
the setting by torque not by temperature,
please refer to the page 13.)
Select the language (Korean or English).
⑤ Configuration screen
⑦ Control configuration screen
⑧ Date configuration screen
⑥ Language
Language button Control setup button
Touch setup button
Advertisement button
Date button
Automatic
refrigeration button
Confirmation
button
Password
setup button
0.5℃ 0.5℃
Table of contents
Other icetro Ice Maker manuals
icetro
icetro IM-0350-AC User manual
icetro
icetro IC Series Supplement
icetro
icetro IM Series User manual
icetro
icetro IM/WM-0460-AC User manual
icetro
icetro SCI-035 User manual
icetro
icetro IU-0090-AN User manual
icetro
icetro WU-0100A User manual
icetro
icetro IFI-770N User manual
icetro
icetro IM-0350-AC/AH User manual
icetro
icetro IM Series Manual
icetro
icetro IM-1100 Supplement
icetro
icetro IM Series User manual
icetro
icetro A25B15 User manual
icetro
icetro IM Series Supplement
icetro
icetro IIS-320SA User manual
icetro
icetro ID-H250-30 User manual
icetro
icetro IU / WU-0100-AC / ACNF User manual
icetro
icetro ID-0450-AN User manual
icetro
icetro IM-0770-AF User manual
icetro
icetro ID-150AN User manual
