Icetro SSI-141TG User manual

* It cannot be used in a foreign country

where the supply voltage is different.

* This product is designed for indoor use

* Make sure to install it indoors.

* The appearance, design, color, and parts

of the product are subject to Change

without prior notic

SSI-141TG

SMALL-SIZED ICE CREAM FREEZER

User’s Manual

Contents

Chapter 1. Safety Instructions ……………………………………………………………… 3

Chapter 2. Installation and external view …………………………………………………… 8

Chapter 3. Functional Description …………………………………………………………… 9

Chapter 4. Assembly and Wash……………………………………………………………… 12

Chapter 5. Checklists for Major Machine Component Management …………………… 17

Chapter 6. Troubleshooting Guidelines …………………………………………………… 18

Chapter 7. Parts Replacement Periods …………………………………………………… 20

Chapter 8. Product Specications …………………………………………………………… 21

Chapter 9. How to inject Refrigerant………………………………………………………… 22

Chapter 10. Circuit Diagram ………………………………………………………………… 23

Chapter 11. Part List ………………………………………………………………………… 24

Product Warranty ……………………………………………………………………………… 28

In order to prevent accidents caused by wrong use and to conveniently use the

product, be cautious of the following: Be sure to understand the following symbols

and their descriptions rst.

If you neglect this symbol and wrongly use the product, it may cause a

re, serious injury or death.

Danger

Warning

If you neglect this symbol and wrongly use the product, it may cause a

re or injury.

Caution

If you neglect this symbol and wrongly use the product, it may cause a

personal injury or a property loss.

※Personal Injury: Minor cuts, burns (high or low temperature) or electric shocks

that do not need hospitalization or long-term hospital visiting.

※Property Loss: The loss on houses, household goods, livestock, bedding, and

such.

Each symbol has the following meanings:

General danger, warning, and caution

No contact!

General thing forbidden

Keep from re!

Thing to be followed

Must be grounded

Do not disassemble!

Risk of electric shock!

Risk of burn!

Chapter 1. Safety Instructions

For relocation of the product, call an

expert(*)

The product may cause such hazards as

falling down unless properly installed. It should

be installed in accordance with related

regulations such as KS standards, the road

and trafc act. The re ghting act and the food

sanitation act.

※Call your distributor.

Ground the product properly.

If the product is not properly

grounded, it may cause

electric leakage or shock.

Do not connect the ground

wire to a running water

pipe or gas pipe, as

this may cause an

electric shock or explosion.

Make sure to connect the product to the

power mains through a dedicated circuit

breaker.

Do not operate the product while all panels

are not well fastened enough.

Call an expert(*) for repair.

Imperfect repair may cause re, electric

shock or injury.

※If you think the product

needs repairing, call

your distributor.

When you dispose of the product,

consult a disposal expert(*)

An accident may

result unless it is

properly disposed

of.

※Call your

distributor.

Keep your warning and caution labels

clean for easy legibility.

If the user misunderstands

the content of such a label,

an accident may occur.

Do not disassemble or alter the product.

Electric shock, re or

injury may result.

Keep a heating device away from the

power cord.

A heating device may melt

down the coating of the

power core, resulting

in re or electric shock.

Do not put anything on the power cord.

Make sure that the power cord is not

twisted or knotted.

Fire or electric shock

may result.

Prohibited Prohibited

Warnings

Call a service center

Observe the regulations Ground the product

Check your labels Prohibited

Label

Warning

Caution

Oh! NO

If the earth leakage breaker is in the ‘off’

position, do not turn it to the ‘on’ position

by force.

If you turn it ‘on’ while the

machine is defective, re

or electric shock may result.

Unplug the power cord and

call a service center.

Stop using the machine, if you nd the

power cord, power receptacle or any

other cord to be defective.

Fire or electric shock may result.

Do not inject inammable material such

as benzene, gasoline, paint thinner or LP

gas into the product otto keep it close to

product.

Explosion, re or

injury may result.

Use the cream mix designated by your

distributor only.

An unauthorized mix that is excessively

diluted with water may cause the product to

break down.

Do not spray with an insecticide,

ammable spray or perfume near the

product.

It may cause a product

failure or re.

Do not touch any moving part inside the

product.

You may get injured.

When you remove a plug or connector,

do so holding the plug or connector.

If you pull out a plug or

connector with excessive

force, electric Shock or

defect may result.

Stop operating the product if you hear

any unusual noise or smell or if you see

smoke coming out from the product.

If you continue to

operate the machine

in such a condition,

re or electric

shock may result.

Do not touch the power plug or any

elctric part with a wet

hand.

Electric shock may result.

Do not climb onto the product or shake

or tilt it.

The product may fall down

or develop a problem.

Do not touch

Prohibited Prohibited

Prohibited

Caution

Warnings

Prohibited

Thinner

Gas

sol

ine

Prohibited

Unplug the power cord

Prohibited

Plug or connector

Do not put anything on the product.

Injury may result if it falls over.

Pay attention to the metallic edges and

vent louvers.

Do not touch the metallic edges or vent

louvers.

Do not place any obstacle at the

entrance of the air vent.

The side and rear of the product should be

maintained at least 20cm from the wall.

If so, the performance will be degraded.

Cannot be educated the person or the

child whom cannot touches or does not

operate do not to make can.

The damage will go to the machine or there is

a possibility which Will be injured.

When you replenish ice cream mix, do

not allow rain or snow to get into any

interior electric part.

Defective operation may

result.

Do not touch a high-temperature

interior part.

There is a caution label on high-temperature

parts. If you touch such a part, burn or unex-

pected injury may result.

Make sure that no electric part has come

into contact with water.

If the product was

immersed in water by

a ood, call a service

center for a check.

Otherwise, re or electric

shock due to electric

leakage may result.

If the machine is not in use for an

extended period of time , store

machine after cleaning it and turning off

the erath leakageBreaker at the rear, or

consult your distributor.

Ice cream mix may decay or coli bacteria

may propagate.

Caution

Caution Do not touch

Warnings

Caution Caution

Prohibited

Before you clean the inside of the prod-

uct, unplug the power cord and wear

rubber gloves.

Electric shock or injury may result.

Make sure to wear gloves when you clean

the condenser.

· You may get your hand injured by a sharp

edge on the condenser.

· Use a n cleaning

agent and brush.

※A metallic brush

with hard,

pointed bristles

must not be

used.

Empty the drain water trap regularly.

Stagnant water may decay or, if the water

overows, it may cause re or electric shock.

If you sell or hand over the product, make

sure to hand over the user’s Manual with

it.

Without the manual,

an accident may occur

because of erroneous

handling or operation.

Do not insert your nger or other

materials into the panel rubber or the

machine supply.

Strongly warn children about its danger.

It may cause an electric shock or product

damage.

If the power cord needs replacement or

repair, request a service center or expert.

Wear gloves

Caution

CautionCaution

Caution

Service center

User’s

Manual

Caution

The freezer system needs a clearance of 20 cm from any side equipment.

If the clearance is not secured, the freezer will lose freezing capability and the

compressor may become permanently damaged.

Mix cover

Cover

handle

Control

buttons

Power switch

AL LEVEL

Discharge

outlet

Drain

water trap

Earth

leakage

breaker

Filter

guide

Rubber

foot

Exterior View

Power supply suitable for the capacity of the product is required.

Therefore it is necessary to check the condition of the power mains at the location of

installation and install a separate power supply system if the capacity is insufcient.

(Refer to Chapter 8 ‘Product Specications.’)

In addition, make sure to use a dedicated power receptacle. If the receptacle is shared

with another electric machine or device, malfunction, electric leakage or a re caused by

overheating may occur.

Drain hole

Chapter 2. Installation and external view

Freezer system

Electrical conncetion

Dasher cover

Right side

panel

YOGURT & SOFT ICE CREAM FREEZER

STANDBY

Power switch SALE SIGNAL

LEVER

HIGH REFRIGERATION

STANDARD

REFRIGERTION

YOGURT ICE CREAM

(LAMP FLASH)

SOFT ICE CREAM

(LAMP ON)

STANDARD

SOFT REFRIGERATION

FREEZING

CONTROL LEVEL

REFRIGERATION

CONTROL LEVEL

MODE BUTTON

Press button while

3 seconds.

When it will be highly

refrigertion, it is one

of the causes of solution

supplying problem.

FREEZING LEVEL

WASH AUTO

Chapter 3. Functional Description

· When this switch is turned on, you can start manipulating the control panel on the front.

Power switch

Standby

It is possible to store the mix in the mix container at a cold temperature to suppress

propagation of bacteria at or below 4.4.

When it is necessary to store the mix for extended period of time without selling the

ice cream, the machine keeps the mix at a constant temperature between 1.7 and 4.4,

thereby preventing overcooling. When you push the button, the lamp will be turned on and

the mode starts. In the standby mode, the wash and the auto function are turned off. To

restore normal operation, push the “AUTO” button. When the machine stops rotating, the

ice cream in the freezer cylinder will become very sticky.

Mix level indicator lamp -“MIX LOW”

· “The mix level indicator lamp is located above the button. If the lamp blinks, it

means that the level of mix is low and that the mix should be replenished as soon as

possible. The level of the mix container should always be maintained at a position where

the mix can sufciently touch the level sensing rod. If the mix is not replenished in timely

manner. It may freeze up.

· A frozen mix Container may cause damage to the dasher, the blade, the driver shaft and

the discharge outlet.

Caution

Each indicating lamp or push button makes a sound. Whenever it is

pushed down. To cancel a function push the function button once again.

The lamp will turned off and the function canceled.

AT INITIAL SET UP

At “mix low” (no raw material), press the control level button for 5 seconds.

Then, the LED lamp will blink sequentially and remember the free load status of the

motor.

· This applies to the rst time installation, motor replacement, and variation of supply

voltage.

FREEZING CONTROL LEVEL

This function controls the density of ice-cream.

Higher LED button gures produce harder ice-cream, and lower gures produce softer

ice-cream.

REFRIGERATION CONTROL LEVEL

This function controls freezing storage temperature.

“HIGH” LED button indicates lower storage temperature.

“SOFT” LED button indicates higher storage temperature.

WASH

Pressing the “WASH” button will light up the lamp.

This indicates operation of the dasher motor. Use this function to wash the product.

See Page12~15 for cleaning method.

AUTO

When the “AUTO” button is pressed, the lamp will light up and ice-cream begins to be

produced. At this time, the raw material in the storage container is cooled down.

This function must be used only when producing ice-cream.

Table of contents

Other icetro Ice Cream Maker manuals

icetro

icetro ISI-163TT User manual

icetro

icetro ISI-273SH3S User manual

icetro

icetro SSI-143S User manual

icetro

icetro ISI-321TA User manual

icetro

icetro ISI-161TH User manual

icetro

icetro SSI-303SN User manual

icetro

icetro ISI-271THS User manual

icetro

icetro SSI-300T User manual

icetro

icetro ISI-303SNA User manual

icetro

icetro ISI-271THN User manual

icetro

icetro ISI-271SHSN User manual

Popular Ice Cream Maker manuals by other brands

Ceado

Ceado M105R Use and maintenance manual

Sage

Sage BCI600UK the Smart Scoop Instruction booklet

SPM

SPM GT Push Series Operator's manual

Kuchef

Kuchef BL1500D instruction manual

Nemox

Nemox Gelato PRO 12K Instructions of use

Stoelting

Stoelting M202A Operator's manual

Taylor

Taylor 142 operating instructions

Unold

Unold DUO Instructions for use

Sunbeam

Sunbeam FRSBWDBK user manual

Elite Gourmet

Elite Gourmet EIM916 user manual

AIGOSTAR

AIGOSTAR 8433325500344 instruction manual

Montiss

Montiss KIM5405MB user manual

Oster

Oster 4746 Instruction manual & recipes

ICETEAM 1927

ICETEAM 1927 COMPACTA VARIO US Instruction handbook

Coldelite

Coldelite EPS 60 XP Instruction handbook

Coldelite

Coldelite COMPACTA Series Instruction handbook

Italian Gelato

Italian Gelato ICETEAM 1927 STARGEL 5 Instruction handbook

Italian Gelato

Italian Gelato CATTABRIGA MANTEMATIC K20S Instruction handbook

icetro SSI-141TG User manual

Popular Ice Cream Maker manuals by other brands