Iceking RK198WE User manual

Installation and Operating Manual

ated Fridge with 4* Ice Box White

Iceking: Henry John House Northway Industrial Estate Northway Lane Ashchurch Tewkesbury

Gloucestershire GL20 8JH T: 01527 888133 E: en[email protected] W: www.ice-king.co.uk

Please

read these instructions carefully before attempting to install or use

this appliance.

It is advisable to keep these instructions in a safe place for future reference.

RK198WE

F R

INTRODUCTION:

Thank you for choosing this ICEKING appliance. It has been designed to give

years of trouble-free use provided it is installed and maintained correctly.

Please read these instructions carefully before installing or using your

appliance. It is advisable to keep your purchase and installation receipts with

these instructions in a safe place for future reference.

Included is some important safety information in addition to guidelines and

recommendations that will enable you to take full advantage of all the

functions available.

This quality appliance has been tested and certified to meet all applicable UK

electrical and safety standards.

This appliance must be installed and connected in accordance with current

regulations by a qualified electrician.

After unpacking the appliance ensure that there is no visible damage.

If the appliance has been damaged during transit, do not use it, contact your

retailer immediately.

YOUR 2-YEAR MANUFACTURER'S

GUARANTEE:

THIS DOES NOT AFFECT YOUR STATUTORY RIGHTS.

Your new ICEKING appliance carries a free guarantee which protects you against the cost

of repairs during the first 24 months from date of purchase provided that: any claim is

accompanied by evidence of the model reference, model serial number and proof of

purchase, such as a Sales Receipt, showing that the appliance was purchased within

the 24 months prior to the date of claim.

YOUR GUARANTEE IS VALID ONLY IN THE UK.

To Register your Appliance simply complete the card in your appliance pack and return

it with a stamp affixed or alternatively register your Appliance at www.ice-

king.co.uk/register-your-product

SERVICE HELP-LINE

Should your appliance develop a fault, please call the

Iceking Service Helpline on:

01527-888133

Please remember to have all your product details available, including the

model number, serial number, date of purchase and your retailer’s details

before registering a fault.

Your service call cannot progress without this information.

WHAT IS NOT COVERED UNDER THE

GUARANTEE:



Any appliance not correctly installed and operated in accordance with

the manufacturer's instructions.



Any appliance that is used for anything other than domestic purposes.



Any defect caused by accident, misuse, unauthorised modification or

inexpert repair.



Cost of Call-out where a fault cannot be found with the appliance.



Cost of Call-out for work covering routine maintenance, such as, but

not exclusively, cleaning of filters or defrosting.



Cost of Call-out for work required to correct the alignment of doors

following door reversal procedures carried out by you.



Use of the appliance by anyone other than the Householder.



Use in any commercial environment.



Consumable items, such as, but not exclusively, fuses in plugs, bulbs

and breakable items which require routine replacement.



Repair costs incurred that have not been authorised by Repairtech

and/or carried out by a non-approved Repairtech engineer.

CONTENTS:

Section 1. First Steps

Section 2. Installation

Section 3.

General Safety and Use

Section 4. Description of the Appliance

Section 5. Daily Use

Section 6.

Maintenance

Section 7. Trouble Shooting

Section 8. Servicing

FIRST STEPS:



Unpack the appliance and check to see if there is any damage. Do not

connect the appliance if it is damaged. Report the damage to your Retailer

immediately and retain the packing.



If there is no damage to the appliance remove all packaging and securing

tape from the appliance and dispose of it correctly (see ‘Environmental

Protection’ Page 26).



If this appliance is to replace an old refrigerator with a lock, you must as a

safety measure break or remove the lock and/or door before disposal.



Disconnect the mains plug from the mains socket. Cut off the mains

cable as close to the appliance as possible and discard.



Your old appliance contains insulation gases and refrigerant that must be

disposed of correctly. Please ensure that the refrigerant circuit is not

damaged before the appliance is taken away for correct disposal, in line

with current legislation. If there is any doubt contact your Local Authority

for instructions.



This appliance may contain the refrigerant isobutene (R600a). This is a

natural gas with a high level of environmental compatibility; however,

caution is required as isobutene is a flammable gas. It is essential to

ensure that refrigerant tubes are not damaged during transportation and

the installation of the appliance. In the event that the refrigerant circuit is

damaged, avoid naked flames or sources of ignition and ventilate the

room in which the appliance is situated.

INSTALLATION:



In the interest of safety and to ensure correct use, before installing the

appliance, read this user manual carefully.



To avoid unnecessary mistakes and accidents, it is important to ensure that all

people using the appliance are thoroughly familiar with its operation and

safety features.



Save these instructions and make sure that they remain with the

appliance if it is moved or sold, so that anyone using it throughout its’

life will be properly informed of the appliance use and safety. Please note

that this warranty is not transferrable.



The manufacturer accepts no responsibility for incorrect installation or use.

IMPORTANT! This appliance must be left to stand in an upright

position for at least 4 hours before being switched on for the first

time.

This appliance has been designed for Domestic Use only.



Wash the interior of the appliance with lukewarm water containing a small

amount of bicarbonate soda (5ml to 0.5 litres of water).



For electrical connection carefully follow the instructions given.



There must be adequate air circulation around the Appliance to avoid

overheating. To achieve sufficient ventilation, follow the instructions

relevant to installation.



Wherever possible the spacers of the product should be against a wall to

avoid the possibility of touching or catching parts that may become hot,

such as the compressor or condenser.

Connect the plug to an adjacent 13amp socket outlet and

ensure that the

appliance is not trapping the supply cable.

Make sure that the plug is accessible after the installation of the

appliance.

Position the appliance in a dry atmosphere and out of direct sunlight.

Do not position next to a cooker or other sources of heat, i.e. radiator.

Leave a minimum gap of 2cm between the appliances in order to avoid

condensation.

Please ensure that there is an ‘air-gap’ between the appliance and the

rear and side walls.

Do not place or store heavy items on the top of this appliance.

Ensure that the appliance is positioned on a firm flat floor.

This appliance must be level.

Ensure that the appliance is upright and wheels/feet are in firm contact

with the floor so that the cabinet is stable.

This appliance has been designed and manufactures to operate efficiently

within an ambient temperature range of +16°C to +32°C.

REVERSING THE DOOR:

Please note that your appliance may be supplied with the doors left or right

hand hinged.

The door opening can be reversed from “right hand hinged” to “left hand

hinged” if required.

Warning! When reversing the door, the appliance must not be connected to

the mains. Remove the plug from the mains beforehand.

Lower Hinge and

Foot Assembly

Left Foot

Upper Hinge

Assembly

Top Cover

Remove the screws from the upper-hinge assembly then lift and remove

the door from the lower hinge assembly. Place it carefully on a soft pad to

avoid scratching.

Now remove the hinge pin from the upper hinge, turn the hinge over and

refit the pin into the same hole.

Remove the screws from the lower hinge and foot assembly. Now remove

the hinge pin from the lower hinge, turn the hinge over and refit the pin

into the same hole.

Remove both of the feet and fit the left foot onto the right-hand side.

Now fit the lower hinge and right-foot assembly onto the left-hand side.

Tighten the screws.

Refit the door onto the lower hinge assembly and then fit the top hinge into

the top of the door. Tighten the screws that hold the top hinge in place.

Ensure that the door is correctly aligned and that it seals correctly. If the

door requires further alignment, slacken off the screws, re-align the door

and retighten the screws.

Re-fit the appliance top cover.

Table of contents

Other Iceking Refrigerator manuals

Popular Refrigerator manuals by other brands

Bonnet Neve

Bonnet Neve SKYVIEW PLUS User instructions

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Instruction book

Sharp

Sharp SJ-BA31IEXW2-EU user manual

CORBERO

CORBERO CC2300MCW Instruction booklet

KitchenAid

KitchenAid 2205264 Use and care guide

Stengel

Stengel KU 1101 A++ user manual

NEFF

NEFF KI181 Series user manual

Hoshizaki

Hoshizaki Reach-In instruction manual

Amana

Amana ASD2524VES00 User instructions

BOMANN

BOMANN KGC 213 instruction manual

Danby

Danby DAR044A1SLDD Owner's use and care guide

Samsung

Samsung RF323TE user manual

Beko

Beko CSA31022 Instructions for use

IKEA

IKEA FROSTIG C 185 E manual

Electrolux

Electrolux ER 6821 D Instruction book

True

True TS-28 Specifications

Frigidaire

Frigidaire FSC23R5DW9 installation guide

Beko

Beko LSP4579W Instructions for use