IBM G 78 User manual

DEUTSCH

APPENDIXESPAÑOLITALIANO

SVENSKAENGLISH

FRANÇAIS

PORTUGUESE

English

ESep.fm Page 0 Friday, April 14, 2000 12:55 PM

First Edition (June/2000)

This publication could contain technical inaccuracies or

typographical errors. Changes are made periodically to the

information herein; these changes will be made in later

editions. IBM may make improvements and/or changes in the

product(s) and/or program(s) at any time.

It is possible that this publication may contain reference to, or

information about, IBM products (machines and programs),

programming, or services that are not announced in your

country.

Requests for copies of this publication and for technical

information about IBM products should be made to your IBM

Authorized Dealer or IBM Retailer.

No part of this publication may be reproduced or distributed in

any form or by any means without prior permission in writing

from the International Business Machines Corporation.

“Note to U.S. Government Users - Documentation related

to restricted rights -Use, duplication or disclosure is

subject to restrictions set forth in GSA ADP Schedule

Contract with IBM Corp.”

Notices

References in this publication to IBM products, programs, or

services do not imply that IBM intends to make these available

in all countries in which IBM operates. Any reference to an

IBM product, program or service is not intended to state or

imply that only IBM’s product, program, or service may be

used. Any functionally equivalent product, program, or service

that does not infringe any of IBM’s intellectual property rights

or other legally protectable rights may be used instead of the

IBM product, program, or service. Evaluation and verification

of operation in conjunction with other products, programs, or

services, except those expressly designated by IBM, are the

user’s responsibility.

IBM may have patents or pending patent applications covering

subject matter in this document. The furnishing of this

document does not give you any license to these patents.

Trademarks

The following terms, used in this publication, are trademarks

or service marks of the IBM Corporation in the United States

or other countries:

IBM HelpCenter

ENERGYSTARis a U.S. registered mark.

Other company, product, and service names may be

trademarks or service marks of others.

ESep.fm Page i Friday, April 14, 2000 12:55 PM

DEUTSCH

APPENDIX ESPA„OL

ITALIANO

SVENSKA ENGLISH

FRAN‚AIS

PORTUGUESE

Contents

Setup . . . . . . . . . . . . . . . . . . . . . 2

User controls . . . . . . . . . . . . . . . 6

Further Information . . . . . . . . . 12

Specifications . . . . . . . . . . . . . 14

Troubleshooting . . . . . . . . . . . . 15

Appendix

Compliances . . . . . . . . . . . . . . 1

Warranty . . . . . . . . . . . . . . . . . 6

E_G78_TOC.fm Page 1 Friday, May 19, 2000 4:46 PM

Setup

Important: Before connecting the monitor, turn off the computer and attached devices. Also, ensure the power at the

electrical outlet matches the power requirements of the monitor. Refer to the Specifications section on page14 for

more details.

Connecting your monitor

Step 1. Connect the signal cable to the video port on

the back of your computer. This port might be

directly attached to your computer (figure A),

or it might be part of a video adapter card (fig-

ure B).

Step 2. Connect the power cord to the monitor first,

then firmly insert the plug into a properly

grounded electrical outlet.

Step 3. Turn on the monitor, and then the computer.

If your monitor does not seem to be working correctly,

refer to the Troubleshooting section starting on

page15 for help.

ESetup.fm Page 2 Friday, April 14, 2000 12:56 PM

DEUTSCH

APPENDIXESPAÑOLITALIANO

SVENSKAENGLISH

FRANÇAIS

PORTUGUESE

Monitor Installation Diskette for

Windows 95 or 98 users

When you start your system after connecting the

monitor, Microsoft®Windows®95 or Windows 98

detects that you have added new hardware and selects

a default setting. For best performance, install the files

from the diskette supplied with your IBM monitor using

the following instructions:

1. Click Start.

2. Select Settings.

3. Click Control Panel. The Control Panel window

opens.

4. Double-click the Display icon. The Display

Properties window opens.

5. Click the Settings tab.

6. Click Advanced Properties.

7. Click the Monitor tab.

8. Click Change.

9. Insert the diskette into the diskette drive and then click

Have Disk.

10. Click OK.

11. Select your monitor type and then click OK. The files

will be copied to your computer from the diskette.

12. Close all windows and remove the diskette from the

diskette drive.

13. Restart the system.

Monitor Installation Diskette for

Windows 2000 users

When you start your computer after connecting the

monitor, Microsoft Windows 2000 Professional detects

that you have added new hardware and selects a

default setting. For best performance, install the files

from the diskette supplied with your IBM monitor using

the following instructions:

1. Click Start.

2. Select Settings.

3. Click Control Panel. The Control Panel window

opens.

4. Double-click the Display icon. The Display

Properties window opens.

5. Click the Settings tab.

6. Click Advanced.

7. Click the Monitor tab.

8. Click Properties.

9. Click the Driver tab, and then click Update Driver to

open the Upgrade Device Driver Wizard window.

10. Click Next.

11. Verify that Display a list of the known drivers for

this device so that can choose a specific driver is

selected.

12. Click Next.

13. Insert the diskette into the diskette drive and click

Have Disk.

14. Click OK.

ESetup.fm Page 3 Friday, April 14, 2000 12:56 PM

15. Select your monitor type and click OK. The files will

be copied to your computer from the diskette.

16. Close all windows and remove the diskette from the

diskette drive.

Microsoft and Windows are trademarks of Microsoft

Corporation in the United States or other countries or

both.

Workplace Preparation

Positioning the Monitor

Choose a suitable place to position the monitor where it

is not near fluorescent desk lighting or any equipment

that produces magnetic fields that could cause

interference. Ensure that the furniture or equipment can

support the weight of the monitor. Allow at least 2 inches

(50mm) ventilation space around the monitor.

Height

The monitor should be positioned so that the top of the

screen is slightly below your eye level when you sit at

your workstation.

Orientation

Choose a position that gives the least reflection from

lights and windows, usually at a right angle to any

windows. The monitor should be positioned directly in

front of you so that you do not have to twist your body.

Tilt the monitor to a comfortable viewing angle.

ESetup.fm Page 4 Friday, April 14, 2000 12:56 PM

DEUTSCH

APPENDIXESPAÑOLITALIANO

SVENSKAENGLISH

FRANÇAIS

PORTUGUESE

Working Practices

Rest

Take regular breaks. Vary your posture, and stand up

and stretch occasionally as prolonged use of computer

workstations can be tiring.

Back

You should sit back in the chair and use the backrest.

Hands

Use a light touch on the keyboard, keeping your hands

and fingers relaxed. Allow a space in front of the

keyboard to rest your wrists when not typing. Consider

using a wristpad.

Eyesight

Working with monitors, in common with any prolonged

close work, can be visually demanding. Look away from

the screen periodically and have your eyesight checked

regularly.

Screen settings

Set the screen brightness and contrast to a comfortable

level. You may have to adjust this as the lighting

changes during the day. Many application programs let

you select color combinations which can help you to

view in comfort.

ESetup.fm Page 5 Friday, April 14, 2000 12:56 PM

The image is already optimized for many display modes. however, the controls can be used to adjust the image to your

liking.

Button Description

Power switch Switches the monitor on and off.

Adjustment buttons

Allow you to move around the on-screen display (OSD) menu and to

make adjustments.

OSD/Select Activates the On-Screen-Display / selects control icons / locks

the OSD to prevent changes. See page 11.

EXIT

Closes an active menu window and takes you to the previous

level. If you are in the main level of the menu, pushing this button

will turn off the menu.

Important: Holding in this button for longer than 5 seconds

erases all data in the User Settings memory.

User controls

1ECtrls.fm Page 6 Friday, May 19, 2000 11:03 AM

DEUTSCH

APPENDIX ESPA„OL

ITALIANO

SVENSKA ENGLISH

FRAN‚AIS

PORTUGUESE

Brightness and contrast can be adjusted as follows, without the need to display the OSD:

Select the function and use the and buttons to adjust. If adjustment is not made within 15 seconds, the

current settings will be saved and the control screen will disappear automatically..

Icon Control Description

BRIGHTNESS Adjusts the background brightness

CONTRAST Adjusts the contrast between foreground and background

1ECtrls.fm Page 7 Friday, May 19, 2000 11:03 AM

On-Screen Display (OSD)

To display the OSD, press the

button. While the

menu displays on the screen, you can select a control

using

button. When the required control is

highlighted, push the button to activate the

control and then use

and

buttons to make

adjustments.

Control Effect of Button

BRIGHTNESS CONTRAST

1ECtrls.fm Page 8 Friday, May 19, 2000 11:03 AM

This manual suits for next models

Table of contents

Popular Monitor manuals by other brands

Linear Acoustic

Linear Acoustic LQ-1000 user guide

AOC

AOC I2579V user manual

Gateway

Gateway FPD1520 user guide

Furuno

Furuno Mu 120c Operator's manual

Asus

Asus VB171D - 17" LCD Monitor Service manual

Dell

Dell S2230MX Setting up

Philips

Philips 107C64 user manual

Dell

Dell S2409WFP user guide

EverFocus

EverFocus EN-7517E instruction manual

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Service manual

Dell

Dell Precision 7680 Connection guide

LG 50PM1M - - 50" Plasma Panel Service manual

Bosch

Bosch DDU 9 manual

Acer

Acer A231HL user manual

Philips

Philips 86BDL4152T user manual

NEC

NEC AccuSync LCD5V user manual

Emay

Emay SleepO2 user manual

LG M1950D-PZ owner's manual