IBM ThinkPad R30 User manual

Part Number: 46P6590

Setup Guide

ThinkPad R30 Series

Thank you for purchasing the IBM ThinkPad R30 Series computer. Match the items on this list with the items in the box.

If any item is missing or damaged, please contact your place of purchase.

hComputer hBattery pack Notes:

1. Some models may contain additional

items that are not listed.

2. Your computer features IBM

Disk-to-Disk recovery. Everything

needed to recover factory-installed files

and applications is on your hard disk.

Disk-to-disk recovery eliminates the

need for a Recovery CD. For more

information, see ″Recovering

preinstalled software″in the Service and

Troubleshooting Guide.

hPower cord hTelephone cable

hAC adapter hBooks:

vSetup Guide

vService and

Troubleshooting

Guide

vManual package

for Microsoft

Windows

Setting up your computer

1. Installing the battery.

Turn the computer over. Insert one end of the battery

(with the rubber feet) into the battery compartment 1,

then let down the other end of the battery securely into

the battery compartment 2. Slide the battery latch to the

lock position 3.

2. Connecting to a power source.

Connect the ac adapter to the power jack (at the rear of

the computer). Make the connections in the order shown. 1

3. Turning on the system.

a) Open the computer display. Press the latches 1 and open the display 2. Then

position the display so that it is convenient for viewing.

b) Press the power switch.

4. Using the TrackPoint

device.

The TrackPoint is a unique device for moving the cursor on

the screen. You can perform all mouse operations using the

TrackPoint. The left and right click buttons function like

mouse buttons.

To move the cursor, use the red-topped stick at the center of

the keyboard. Press gently with your index finger in the

direction you want to move the cursor. To select and drag

an object, press and hold one of the buttons with either

thumb, as required by your software.

For more information about the TrackPoint, press the

ThinkPad button to open Access ThinkPad, your on-board

help system.

Cursor

Stick

Right click button

Center button

Left click button

5. Using the volume control.

You can adjust the sound level produced by the built-in

speakers by using the following three buttons:

1 Volume down

2 Volume up

3 Mute

If you mute the sound, and then turn off your

computer, the sound remains muted when you turn

your computer on again. To turn on the sound,

press Volume up or Volume down.

When you press one of these buttons, the volume indicator

appears on the screen for a few seconds. For more

information on volume control, see the on-board help

system, Access ThinkPad.

123

6. Setting up Windows.

Your computer comes with the Microsoft Windows operating system. After

turning on your computer, follow the instructions on the screen to set up the

operating system. This procedure takes approximately 30 minutes, and your

computer restarts several times.

7. Using Access ThinkPad.

Whenever you have a question about your computer, or wish to view IBM

Web sites, simply press the ThinkPad button to open Access ThinkPad.

Access ThinkPad is the comprehensive, on-board help and information center

for your computer. It travels with you, eliminating the need to carry reference

manuals.

Find information about your ThinkPad computer and its features by using the

Quick Search or clicking one of the topics shown. Click one of the Internet

buttons for direct access to help and support, tips from other mobile users, and

information about accessories, software and upgrades.

ThinkPad button

Installing memory

Increasing memory capacity is an effective way to make programs run faster. You can increase the amount of memory in

your computer by installing a PC133 dual inline memory module (DIMM), available as an option, in the memory slot on

the bottom of the computer. DIMMs with different capacities are available.

Note: Use only a PC133 DIMM in your computer. If you install a DIMM that is not supported by your computer, the

computer beeps, and the system does not start. You can purchase the appropriate memory option from your IBM

reseller, IBM marketing representative, or from our website.

Attention: Before you start installing a module, touch a metal table or a grounded metal object. This action reduces any

static electricity from your body. The static electricity could damage the DIMM.

To install the DIMM, do the following:

1. Turn off the computer; then disconnect the ac adapter and

all cables from the computer.

2. Close the computer display, and turn it over.

3. Remove the battery.

4. Loosen the screw on the memory slot cover 1;then

remove the cover 2.

If the DIMM is already in the memory slot, remove it to

replace the new one by pressing out on the latches on

both edges of the socket at the same time. Be sure to save

it for future use.

5. Find the notch on the side of the DIMM.

Attention: To avoid damaging the DIMM, do not touch

its contact edge.

6. With the notched end of the DIMM toward the right side

of the socket, insert the DIMM into the socket at an angle

of about 20 degrees; then press it firmly 2.

7. Pivot the DIMM until it snaps into place.

Make sure that the card is firmly fixed in the slot and does not move easily.

8. Replace the memory slot cover over the memory slot, aligning the back side of the cover first; then tighten the screw.

Attention: When you have added or upgraded a memory card, do not use your computer until you have closed the

cover. Never use the computer with the cover open.

9. Put the battery back in place and turn the computer over again.

To make sure that the DIMM is installed correctly, do as follows:

1. Turn the computer on.

2. While the “Press F1 for IBM BIOS Setup Utility”message is displayed at the lower-left area of the screen, press the F1

key. The IBM BIOS Setup Utility screen appears. The “Installed memory”item shows the total amount of memory

installed in your computer. The system allocates a portion of video memory, approximately 8 MB, for video. For example,

if you install a 64-MB DIMM into a computer whose built-in memory is 64 MB, the quantity shown in “Installed

memory”should be 120 MB.

Your name:

_________________________

Company name:

_________________________

Model number:

_________________________

Serial number:

_________________________

Company or reseller service:

_________________________

IBM service Web site:

_________________________

IBM service number:

_________________________

Trademarks

The following terms are trademarks of the IBM Corporation in the

United States or other countries or both:

IBM

ThinkPad

TrackPoint

Microsoft and Windows are trademarks of Microsoft corporation

in the United States and/or other countries.

Notes:

Other manuals for ThinkPad R30

This manual suits for next models

Popular Laptop manuals by other brands

HP ze2401xt - Pavilion Notebook PC datasheet

Velocity

Velocity NoteMagix M10 quick start guide

Dell

Dell Alienware 17 R2 Service manual

Toshiba

Toshiba A105-S2236 Specifications

HP ENVY 17 Maintenance and service guide

Winbook

Winbook LM user guide

Dell

Dell Inspiron 1464 Setup guide

Dell

Dell Inspiron 15R 5537 quick start guide

HP PROBOOK 4520S Maintenance and service guide

Dell

Dell Latitude ATG D620 Service manual

Sony

Sony VAIO PCG-FX270 Specifications

Dell

Dell Latitude 7310 Service manual

Dell

Dell Precision GU806 Quick reference guide

Sony

Sony VAIO PCG-R505JLK user guide

Lenovo

Lenovo THINKPAD X32 Setup guide

HP Compaq tc4200 Software guide

Toshiba

Toshiba mini NB300 specification

Lenovo

Lenovo ThinkPad X201 Tablet Manual