IBM LS42 - BladeCenter - 7902 User manual

IBM BladeCenter LS42 Multiprocessor Expansion Unit

Installation Guide



IBM BladeCenter LS42 Multiprocessor Expansion Unit

Installation Guide



Note: Before using this information and the product it supports, read the general information in Appendix B, “IBM

Statement of Limited Warranty Z125-4753-10 08/2008,” on page 15 and Appendix C, “Notices,” on page 35.

First Edition (November 2008)

©Copyright International Business Machines Corporation November 2008.

US Government Users Restricted Rights –Use, duplication or disclosure restricted by GSA ADP Schedule Contract

with IBM Corp.

Contents

Safety ...............v

Chapter 1. Introduction ........1

Installation guidelines ...........1

System reliability guidelines ........2

Handling static-sensitive devices.......2

Chapter 2. Installing the Multiprocessor

Expansion unit............5

Removing the blade server from the BladeCenter unit 7

Opening the blade server cover ........8

Removing the LS22 optimizer.........9

Installing options in the Multiprocessor Expansion

Unit .................9

Closing the blade server cover ........10

Installing the blade server in aBladeCenter unit ..11

Appendix A. Getting help and technical

assistance .............13

Before you call .............13

Using the documentation ..........13

Getting help and information from the World Wide

Web .................14

Software service and support ........14

Hardware service and support ........14

IBM Taiwan product service .........14

Appendix B. IBM Statement of Limited

Warranty Z125-4753-10 08/2008 ....15

Part 1-General Terms...........15

Part 2-Country-unique Terms ........19

Part 3-Warranty Information ........32

Appendix C. Notices .........35

Trademarks ..............35

Important notes .............36

Product recycling and disposal ........37

Battery return program ..........38

Electronic emission notices .........39

Federal Communications Commission (FCC)

statement ..............39

Industry Canada Class Aemission compliance

statement ..............40

Avis de conformité àla réglementation

d’Industrie Canada ...........40

Australia and New Zealand Class Astatement .40

United Kingdom telecommunications safety

requirement .............40

European Union EMC Directive conformance

statement ..............40

Taiwanese Class Awarning statement ....41

Chinese Class Awarning statement .....41

Japanese Voluntary Control Council for

Interference (VCCI) statement .......41

Korean Class AWarning Statement .....41

Index ...............43

©Copyright IBM Corp. November 2008 iii

iv IBM BladeCenter: LS42 Multiprocessor Expansion Unit

Safety

Before installing this product, read the Safety Information.

Antes de instalar este produto, leia as Informações de Segurança.

Læs sikkerhedsforskrifterne, før du installerer dette produkt.

Lees voordat udit product installeert eerst de veiligheidsvoorschriften.

Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.

Avant d’installer ce produit, lisez les consignes de sécurité.

Vor der Installation dieses Produkts die Sicherheitshinweise lesen.

Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.

Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet.

Antes de instalar este produto, leia as Informações sobre Segurança.

Antes de instalar este producto, lea la información de seguridad.

Läs säkerhetsinformationen innan du installerar den här produkten.

©Copyright IBM Corp. November 2008 v

Important:

All caution and danger statements in this documentation begin with anumber.

This number is used to cross reference an English caution or danger statement

with translated versions of the caution or danger statement in the IBM Safety

Information book.

For example, if acaution statement begins with anumber 1, translations for that

caution statement appear in the IBM Safety Information book under statement 1.

Be sure to read all caution and danger statements in this documentation before

performing the instructions. Read any additional safety information that comes

with the server or optional device before you install the device.

Statement 1

DANGER

Electrical current from power, telephone, and communication cables is

hazardous.

To avoid ashock hazard:

vDo not connect or disconnect any cables or perform installation,

maintenance, or reconfiguration of this product during an electrical storm.

vConnect all power cords to aproperly wired and grounded electrical outlet.

vConnect to properly wired outlets any equipment that will be attached to

this product.

vWhen possible, use one hand only to connect or disconnect signal cables.

vNever turn on any equipment when there is evidence of fire, water, or

structural damage.

vDisconnect the attached power cords, telecommunications systems,

networks, and modems before you open the device covers, unless

instructed otherwise in the installation and configuration procedures.

vConnect and disconnect cables as described in the following table when

installing, moving, or opening covers on this product or attached devices.

To Connect: To Disconnect:

1. Turn everything OFF.

2. First, attach all cables to devices.

3. Attach signal cables to connectors.

4. Attach power cords to outlet.

5. Turn device ON.

1. Turn everything OFF.

2. First, remove power cords from outlet.

3. Remove signal cables from connectors.

4. Remove all cables from devices.

vi IBM BladeCenter: LS42 Multiprocessor Expansion Unit

Statement 21

CAUTION:

Hazardous energy is present when the blade is connected to the power source.

Always replace the blade cover before installing the blade.

Safety vii

viii IBM BladeCenter: LS42 Multiprocessor Expansion Unit

Other manuals for LS42 - BladeCenter - 7902

Table of contents

Other IBM Computer Hardware manuals

IBM

IBM BladeCenter S SAS RAID Controller Module User manual

IBM

IBM Power System POWER7 Series Quick start guide

IBM

IBM EMX0 PCIe3 Instruction Manual

IBM

IBM QLogic 4Gb Fibre Channel Expansion Card User manual

IBM

IBM Advanced SerialRAID/X User manual

IBM

IBM CI5VGM Series User manual

IBM

IBM M791 Series User manual

IBM

IBM 25CPC710 Installation and operating instructions

IBM

IBM 09N4076 User manual

IBM

IBM Power Systems 9223-22S User manual

IBM

IBM 2740-1 User guide

IBM

IBM 4331 Manual instruction

IBM

IBM System x3630 M4 User manual

IBM

IBM 3745 Series Instruction Manual

IBM

IBM Power 730 Express 8231-E2B User manual

IBM

IBM eserver Cluster 1350 Installation and maintenance instructions

IBM

IBM Redbooks 2/4 Port Ethernet Expansion Card User manual

IBM

IBM MPC603EC User manual

IBM

IBM PN 10K8798 User manual

IBM

IBM PowerPC 750GX User manual

IBM

IBM S922 Instruction Manual

IBM

IBM System x Education M5000 Series User manual

IBM

IBM 4767 User manual

IBM

IBM WD1003-WA2 User manual

Popular Computer Hardware manuals by other brands

EMC2

EMC2 VNX Series Hardware Information Guide

Panasonic

Panasonic DV0PM20105 Operation manual

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 user manual

Gigabyte

Gigabyte B660M DS3H AX DDR4 user manual

Raidon

Raidon iT2300 Quick installation guide

National Instruments

National Instruments PXI-8186 user manual

Hauppauge

Hauppauge WinTV-HVR-2250 Quick installation guide

Kontron

Kontron CP6002 user guide

Manhattan

Manhattan 702843 user manual

Aphex

Aphex 230 instruction manual

AMD

AMD Phenom II Product data sheet

Intel

Intel NUC 12 Pro user guide

dbx

dbx Zone Pro 1260 user manual

Galaxy

Galaxy GHDX2-2430S-24F4D Installation and hardware reference manual

Intel

Intel AXXRMFBU4 Quick installation user's guide

Kontron

Kontron DIMM-PC/MD product manual

ST X-NUCLEO-SAFEA1B How to use

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 installation manual