IBall Generation i iB-WRR312N User manual

generation i

Ver. 4.0.0

QIG

Please read this user manual carefully before using it.

User Manual

iB-WRR312N

300M Wi-Fi Range

Extender/Access Point

FCC STATEMENT

PRODUCT OVERVIEW

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment

generates uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio / TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate

the equipment.

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to

take adequate measures.

iBall iB-WRR312N Wi-Fi Range Extender /Access Point complies with 802.11n standard

- MIMO Technology with enhanced wireless data transmission speed up to 300Mbps

- 3dBi x 2 Omni-directional antenna provides better wireless performance and coverage

- LED indicator for easy identification

Product Features:

• Complies with IEEE 802.3, IEEE802.3u standards

• Complies with IEEE802.11b/g/n Wireless standards

• 10/100M (RJ45) LAN Port

• Operation mode: AP / Repeater

• Wireless security such as WEP, WPA-PSK & WPA2-PSK

• 3dBi x 2 Omni-directional Antenna

Package Content:

• The following contents should be found in the product packaging: 300M Wi-Fi Range Extender/ Access Point (iB-WRR312N)

• Quick Installation Guide

• RJ45 Patch cord

LAN Port 1-10/100M RJ45 Port

Button Reset / WPS

LED's Power/ Wi-Fi/ WPS/ LAN

Antenna Internal Omni Directional Antenna

Frequency 2.4GHz

Power Rating 2-Pin Plug (No External power adapter required)

LED Indicators:

Specification:

ON: The Device is power on

Power LED OFF: The Device is not receiving electrical power.

AP Mode: Wi-Fi LED ON/OFF

WiFi LED Repeater Mode: Connected ON, Disconnected is

Flashing

Slow Flashing: The Device WPS waiting for client

connection

Fast Flashing: The Device Connecting to your

AP/Router

ON: The Ethernet port is connected

OFF: The Ethernet port is disconnected

Flashing: Data Transferring

WPS LED

LAN LED

INSTALLATION

WPS Function: WPS function will be activated by press 1-2 secs.

Reset Button: Press reset button 3 seconds to reset the device. Configure 300M Wi-Fi Range Extender /Access Point

1.To access 300M Wi-Fi Range Extender /Access Point Web-based Utility, connect device to default SSID “iBall” over wireless with your

laptop or desktop and open a web browser such as Internet Explorer or Firefox.

Open the browser & type: http://192.168.1.254 follow the instructions

Default password is: admin

2.After logged in you will find the below iBall Home page

Connection Mode:

Before you start the installation process, you need to prepare the following things:

Item Description

iB-WRR312N Product Find it in your box packaging.

PC Should have installed IE8 or higher browser

Device Modes

Access Point mode:

The Device is connected to a wired network then transforms

the wired Internet into wireless so that multiple devices can

access the Internet. AP mode is suite for Office, Home and

places where only wired network available

Repeater mode:

The Device copies and reinforces the existing wireless

signal to extend the coverage of the signal. This mode is

especially useful for a large space to eliminate signal-blind

corners.Repeater mode fit for large house, Office,

warefouse or other spaces where the existing signal is

weak.

4.User can do all the advance settings on this page.

3.User can select Repeater or AP mode as per requirement. Also user can change the Wireless SSID & Wireless

Password on this menu

• Product specifications, size and shape are subject to without notice and actual product appearance may differ from that depicated on the package. • All trademarks, logos,

brands & products names are properties of their respective owners. • Warranty: All iBall products are governed by iBall warranty terms. Refer www.iBall.co.in • Manufactured

in ISO9001:2000 certified facility. • This product falls under e-waste (Management & Handling) Rules, 2011. For proper disposal method, visit our website (www.iBall.co.in-

/e-waste)