I-Inc IC194 User manual

19 inch TFT LCD Monitor

iC194

USER’S MANUAL

User’s Manual

Before operating the monitor, please read this manual thoroughly. This manual should be

retained for future reference.

FCC Class B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy, and if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

 Consult the dealer or an experienced radio/TV technician for help.

The device complies with Parts 15 of the FCC Rule. Operation is subject to the following

two conditions﹕(1) this device may not cause harmful interference﹔and (2) this device

must accept any interference received, including interference that may cause undesired

operations.

CANADA

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing

Equipment Regulation.

This device complies with requirement of EMC directive 89/336/EEC with regard to

Electromagnetic Compatibility, and 73/23/EEC and 93/68/EEC with regard to Low Voltage

directive.

Socket-outlet shall be near the equipment and shall be accessible.

User’s Manual

Congratulations!

The display you have just purchased carries the TCO’03

Displays label. This means that your display is designed,

manufactured and tested according to some of the strictest

quality and environmental requirements in the world. This makes

for a high performance product, designed with the user in focus

that also minimizes the impact on our natural environment.

Some of the features of the TCO’03 Display requirements:

Ergonomics

• Good visual ergonomics and image quality in order to improve the working environment

for the user and to reduce sight and strain problems. Important parameters are

luminance, contrast, resolution, reflectance, colour rendition and image stability.

Energy

• Energy-saving mode after a certain time – beneficial both for the user and the

environment

• Electrical safety

Emissions

• Electromagnetic fields

• Noise emissions

Ecology

• The product must be prepared for recycling and the manufacturer must have a certified

environmental management system such as EMAS or ISO 14 001

• Restrictions on

 chlorinated and brominated flame retardants and polymers

 heavy metals such as cadmium, mercury and lead.

The requirements included in this label have been developed by TCO Development in

cooperation with scientists, experts, users as well as manufacturers all over the world.

Since the end of the 1980s TCO has been involved in influencing the development of IT

equipment in a more user-friendly direction. Our labelling system started with displays in

1992 and is now requested by users and IT-manufacturers all over the world.

For more information, please visit

www.tcodevelopment.com

User’s Manual

TABLE OF CONTENTS

SAFETY NOTICE........................................................................................... 5

PRECAUTIONS......................................................................................... 5

SPECIAL NOTES ON LCD MONITORS................................................... 6

BEFORE YOU OPERATE THE MONITOR.................................................... 7

FEATURES................................................................................................ 7

CHECKING THE CONTENTS OF THE PACKAGE.................................. 7

INSTALLATION INSTRUCTIONS ............................................................. 8

POWER...................................................................................................... 8

MAKING CONNECTIONS......................................................................... 9

ADJUSTING THE VIEWING ANGLE...................................................... 10

OPERATING INSTRUCTIONS..................................................................... 11

GENERAL INSTRUCTIONS.................................................................... 11

FRONT PANEL CONTROL..................................................................... 12

HOW TO ADJUST A SETTING ............................................................... 13

PLUG AND PLAY .................................................................................... 16

TECHNICAL SUPPORT (FAQ).................................................................... 17

Q & A FOR GENERAL PROBLEMS....................................................... 17

ERROR MESSAGE & POSSIBLE SOLUTIONS .................................... 18

APPENDIX ................................................................................................... 19

SPECIFICATIONS ................................................................................... 19

User’s Manual

SAFETY NOTICE

1. The changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

2. Shielded interface cables and AC power cord, if any, must be used in order to comply

with the emission limits.

3. The manufacturer is not responsible for any radio or TV interference caused by

unauthorized modification to this equipment. It is the responsibilities of the user to

correct such interference.

WARNING:

To prevent fire or shock hazard, do not expose the monitor to rain or moisture. Dangerously

high voltages are present inside the monitor. Do not open the cabinet. Refer servicing to

qualified personnel only.

PRECAUTIONS

•Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry

tub, swimming pool or in a wet basement.

•Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can

injure a person and cause serious damage to the appliance. Use only a cart or stand

recommended by the manufacturer or sold with the monitor. If you mount the monitor on

a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit

instructions.

•Slots and openings in the back and bottom of the cabinet are provided for ventilation. To

ensure reliable operation of the monitor and to protect it from overheating, be sure these

openings are not blocked or covered. Do not place the monitor on a bed, sofa, rug, or

similar surface. Do not place the monitor near or over a radiator or heat register. Do not

place the monitor in a bookcase or cabinet unless proper ventilation is provided.

•The monitor should be operated only from the type of power source indicated on the

label. If you are not sure of the type of power supplied to your home, consult your dealer

or local power company.

•Unplug the unit during a lighting storm or when it will not be used for long period of time.

This will protect the monitor from damage due to power surges.

•Do not overload power strips and extension cords. Overloading can result in fire or

electric shock.

•Never push any object into the slot on the monitor cabinet. It could short circuit parts

causing a fire or electric shock. Never spill liquids on the monitor.

•Do not attempt to service the monitor by yourself; opening or removing covers can

expose you to dangerous voltages and other hazards. Please refer all servicing to

qualified service personnel.

•To ensure satisfactory operation, use the monitor only with UL listed computers which

have appropriate configured receptacles marked between 100 - 240V AC, Min. 5A.

•The wall socket shall be installed near the equipment and shall be easily accessible.

User’s Manual

SPECIAL NOTES ON LCD MONITORS

The following symptoms are normal with LCD monitor and do not indicate a problem.

•Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn

off the Power Switch and then turn it on again to make sure the flicker disappears.

•You may find slightly uneven brightness on the screen depending on the desktop pattern

you use.

•The LCD screen has effective pixels of 99.99% or more. It may include blemishes of

0.01% or less such as a missing pixel or a pixel lit all of the time.

•Due to the nature of the LCD screen, an afterimage of the previous screen may remain

after switching the image, when the same image is displayed for hours. In this case, the

screen is recovered slowly by changing the image or turning off the Power Switch for

hours.

•If the screen suddenly flashes erratically or the backlighting fails, please contact your

dealer or service center for repair. Do not attempt to repair the monitor yourself.

Lamp Disposal

LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURYAND MUST BE RECYCLED OR

DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE

INFORMATION, CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT WWW.EIAE.ORG.

FOR LAMP SPECIFIC DISPOSAL INFORMATION CHECK WWW.LAMPRECYCLE.ORG.

User’s Manual

BEFORE YOU OPERATE THE MONITOR

FEATURES

•19” TFT Color LCD Monitor

•Crisp, Clear Display for Windows

•Recommended Resolutions: 1280 X 1024 @75Hz

•EPA ENERGY STAR®

•Ergonomic Design

•Space Saving, Compact Case Design

CHECKING THE CONTENTS OF THE PACKAGE

The product package should include the following items:

LCD Monitor

(Reference only, the real feature is depended on selected model)

Screen Base

Cables and User manual

Power Cord VGA Cable Audio Cable

User’s manual Warranty card DVI-D Cable (dual input

mode optional)

User’s Manual

INSTALLATION INSTRUCTIONS

Install Remove

Figure.1. Installing and Removing the Base

INSTALLATION:

1. Align the monitor with the opening in the base.

2. Note that the longer section of the base points forward.

3. Snap the monitor into its base. A clear click sound will affirm that the base is connected

correctly.

4. Verify that the monitor is securely attached to the base by looking at the bottom of the

base and making sure that the clips are fully engaged in the base.

REMOVAL:

1. Flip over the monitor so that it is upside down.

2. Press the 2 clips on the base that holds the monitor in place.

3. Gently press and hold the 2 clips while pulling the base from the monitor unit they are

unattached.

POWER

POWER SOURCE:

1. Make sure that the power cord is the correct type required in your area.

2. This LCD monitor has an Internal universal power supply that allows operation in either

100/120V AC or 220/240V AC voltage area (No user adjustment is required.)

3. Connect the AC-power cord one end to your LCD monitor’s AC-input socket, the other

end to wall-outlet .

User’s Manual

MAKING CONNECTIONS

CONNECTING TO A PC:

Turn off your computer before performing the procedure below.

1. Connect one end of the D-Sub cable to the back of the monitor and connect the other

end to the computer’s D-Sub port.

2. Connect one end of the DVI-D cable (Dual input mode optional) to the back of the

monitor and connect the other end to the computer’s DVI-D port.

3. Connect the audio cable between the monitor's audio input and the PC's audio output

(green port).

4. Plug one end of the AC power cord to the LCD monitor’s AC input socket, and the other

end to Wall outlet.

5. Turn on your monitor and computer.

Figure.2. Connecting to a PC

1. Audio Input 2. VGA Input

3. DVI-D Input (optional) 4. Power AC Input

234 1

User’s Manual

ADJUSTING THE VIEWING ANGLE

•For optimal viewing it is recommended to look at the full face of the monitor, then adjust

the monitor’s angle to your own preference.

•Hold the stand so you do not topple the monitor when you change the monitor’s angle.

•You are able to adjust the monitor’s angle from 0°to 20°.

Figure.3. Monitor Angle

NOTES:

•Do not touch the LCD screen when you change the angle. It may cause damage or

break the LCD screen.

•Be careful not to place fingers or hands near the hinges when tilting the monitor,

otherwise pinching can result.

20°

Table of contents

Popular Monitor manuals by other brands

Linear Acoustic

Linear Acoustic LQ-1000 user guide

AOC

AOC I2579V user manual

Gateway

Gateway FPD1520 user guide

Furuno

Furuno Mu 120c Operator's manual

Asus

Asus VB171D - 17" LCD Monitor Service manual

Dell

Dell S2230MX Setting up

Philips

Philips 107C64 user manual

Dell

Dell S2409WFP user guide

EverFocus

EverFocus EN-7517E instruction manual

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Service manual

Dell

Dell Precision 7680 Connection guide

LG 50PM1M - - 50" Plasma Panel Service manual

Bosch

Bosch DDU 9 manual

Acer

Acer A231HL user manual

Philips

Philips 86BDL4152T user manual

NEC

NEC AccuSync LCD5V user manual

Emay

Emay SleepO2 user manual

IBM

IBM 6360 Product support manual

I-Inc iC194 User manual

Popular Monitor manuals by other brands