Hyundai HCBEN40V-A User manual

English |

CORDLESS LAWN TRIMMER

HCBEN40V-A

WARNING: Read thoroughly the instruction manual before use.

Safety

IMPORTANT

READ CAREFULLY BEFORE USE

KEEP FOR FUTURE REFERENCE

Safe operating practices

Training

a) Read the instructions carefully. Be familiar with the

controls and the correct use of the machine.

b) Never allow children or people unfamiliar with these

instructions to use the machine. Local regulations can

restrict the age of the operator.

c) Keep in mind that the operator or user is responsible for

accidents or hazards occurring to other people or their

property.

Preparation

a) Before use, always visually inspect the machine for

damaged, missing or misplaced guards or shields.

b) Never operate the machine while people, especially

children, or pets are nearby.

Operation

a) Wear eye protection and stout shoes at all times while

operating the machine.

b) Avoid using the machine in bad weather conditions

especially when there is a risk of lightning.

c) Use the machine only in daylight or good artificial light.

d) Never operate the machine with damaged guards or

shields or without guards or shields in place.

Safety

e) Switch on the motor only when the hands and feet are

away from the cutting means.

f) Always disconnect the machine from the power supply

(i.e. remove the plug from the mains, remove the disabling

device or removable battery)

1) Whenever the machine is left unattended;

2) Before clearing a blockage;

3) Before checking, cleaning or working on the machine;

4) After striking a foreign object;

5) Whenever the machine starts vibrating abnormally.

h) Take care against injury to feet and hands from the

cutting means.

i) Always ensure that the ventilation openings are kept

clear of debris.

Maintenance and storage

a) Disconnect the machine from the power supply (i.e.

remove the plug from the mains, remove the disabling

device or removable battery) before carrying out

maintenance or cleaning work.

b) Use only the manufacturer’s recommended

replacement parts and accessories.

c) Inspect and maintain the machine regularly. Have the

machine repaired only by an authorized repairer.

d) When not in use, store the machine out of the reach of

children.

- never allow children, persons with reduced physical,

sensory or mental capabilities or lack of experience and

knowledge or people unfamiliar with these instructions

to use the machine, local regulations may restrict the

age of the operator;

Safety

- Never operate the machine while people, especially

children, or pets are nearby. Keep them at least 15 m

away from the machine during its operation.

- Stop using the tool when a risk might occur (people are

nearby, dangerous material on the working area,

problem with the tool, etc.). Check the working area

before working and stay in alert when operating the tool.

- Follow the provided instructions for assembly, use,

repairs, maintenance and storage

- Never replace the non-metallic cutting means with

metallic cutting means;

- Do not overreach and keep the balance at all times, to

always be sure of the footing on slopes and to walk,

never run.

- Do not to touch moving hazardous parts before the

machine is stopped and the moving hazardous parts

have come to a complete stop;

- Always wear substantial footwear and long trousers

while operating the machine;

- This appliance is not intended for use by persons

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person

responsible for their safety.

- Children should be supervised to ensure that they do

not play with the appliance.

- Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a

power tool while you are tired or under the influence of

drugs, alcohol or medication. A moment of inattention

Safety

while operating power tools may result in serious

personal injury.

- Use personal protective equipment. Always wear eye

protection. Protective equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing protection

used for appropriate conditions will reduce personal

injuries.

- Prevent unintentional starting. Ensure the switch is in

the off-position before connecting the battery pack,

picking up or carrying the tool.

- A moving cutting attachment can cause severe injury.

Maintain proper control of the machine with both hands

until the cutting attachment has completely stopped

rotating.

- Replace any cutting attachment that has been

damaged. Always make sure that the cutting

attachment is installed correctly and securely fastened

before each use.

- Use only accessories recommended by manufacturer.

Non-recommended accessories can cause injuries and

accidents. Contact your dealer or our service agent.

- Always use the harness provided when operating the

tool.

- Do not expose the tool to rain and humidity.

- In case of abnormal vibrations, stop immediately to use

the tool and remove the battery; check if all screws are

firmly tighten, if the cutting mean are correctly

assembled. In case of doubt, bring the tool to our agent

service for inspection.

- Always start the tool safely, tools correctly and fully

assembled, foot and body far from the cutting means,

harness installed and used.

Safety

- Always inspect the tool before and after the operation

for signs of damage such as cracks in the cutting

attachment or ageing. In case of damages or ageing,

bring the tool to our agent service for inspection and

reparation.

- Check the tool for loose fasteners. Tighten safely loose

fasteners.

- Never operate the machine with defective guards or

shields, or without safety devices.

- Always use the tool with the battery fully charged.

Before use, check the charge level and charge the

battery if necessary.

- In case of accident or breakdown, stop immediately the

tool and remove the battery. Check the breakdown or

accident, repair the tool if necessary. Bring the tool to a

service agent if necessary.

- Do not replace the blade with metal multi-piece pivoting

chains and flail blades; this type of blade must not be

used with this tool.

- Stop the machine and allow it to cool before storing or

transporting. Do not store or transport the machine with

batteries fitted, remove and secure separately

- Clean all foreign material from the product. Store it in a

cool dry and well-ventilated place that is inaccessible to

children. Keep away from corrosive agents such as

garden chemicals and de-icing salts. Do not store

outdoors.

- For transportation, secure the machine against

movement or falling to prevent injury to persons or

damage to the machine.

- Use only original manufacturer’s replacement parts,

accessories and attachments. Failure to do so can

Safety

cause possible injury, poor performance and may void

your warranty. You may make adjustments and repairs

described here. For other repairs, contact the

authorized service agent.

- Contact your dealer of manufacturer to know which

parts/accessories can be used with this tool.

- Before any maintenance or adjustment, stop the tool

and remove the battery.

- After extending new cutter line or cleaning, always

return the product to its normal operating position

before starting.

- After each use, clean the product with a soft dry cloth.

- Check all nuts, bolts and screws at frequent intervals

for proper tightness to ensure the product is in safe

working condition. Any part that is damaged should be

properly repaired or replaced by an authorized service

centre.

RESIDUAL RISK

Even when the product is used as prescribed, it is still

impossible to completely eliminate certain residual risk

factors. The following hazards may arise in use and the

operator should pay special attention to avoid the

following:

- Injury caused by vibration. Always use the right tool for

the job, use designated handles and restrict working

time and exposure.

- Exposure to noise can cause hearing injury. Wear ear

protection and limit exposure

- Kickback can occur when using the brushcutter. Ensure

proper control by using both hands on the designated

Safety

handles. Read and follow the directions elsewhere in

this manual to help reduce the risk of kickback.

- Injuries may be caused, or aggravated, by prolonged

use of a tool. When using any tool for prolonged

periods, ensure you take regular breaks.

RISK REDUCTION

It has been reported that vibrations from hand-held tools

may contribute to a condition called Raynaud’s Syndrome

in certain individuals. Symptoms may include tingling,

numbness and blanching of the fingers, usually apparent

upon exposure to cold. Hereditary factors, exposure to

cold and dampness, diet, smoking and work practices are

all thought to contribute to the development of these

symptoms. There are measures that can be taken by the

operator to possibly reduce the effects of vibration:

Keep your body warm in cold weather. When operating

the unit wear gloves to keep the hands and wrists warm. It

is reported that cold weather is a major factor contributing

to Raynaud’s Syndrome.

After each period of operation, exercise to increase blood

circulation.

Take frequent work breaks. Limit the amount of exposure

per day.If you experience any of the symptoms of this

condition, immediately discontinue use and see your

doctor about these symptoms.

Safety

INTENDED USE

The product is only intended for use outdoors. For

safety reasons the product must be adequately

controlled by using two handed operation.

The product is intended for cutting long grass,

pulpy weed, or brush and similar vegetation at or

about ground level. The cutting plane should be

approximately parallel to the ground surface. The

product should not be used to trim hedges, bushes

or other vegetation where the cutting plane is not

parallel to the ground surface.

MAINTENANCE

Servicing requires extreme care and knowledge.

For service we suggest you return the product to your

nearest authorized service center for repair. When

servicing, use only identical replacement parts.

Use only original manufacturer’s replacement parts,

accessories and attachments. Failure to do so can cause

possible injury, poor performance and may void your

warranty.

You may make adjustments and repairs described

here. For other repairs, contact the authorized

service agent.

Before any maintenance or adjustment, disable the

machine by removing the power source.

Safety

After extending new cutter line or cleaning,

checking the blade, always return the product to its

normal operating position before starting.

After each use, clean the product with a soft dry cloth.

Check all nuts, bolts and screws at frequent

intervals for proper tightness to ensure the product

is in safe working condition. Any part that is

damaged should be properly repaired or replaced

by an authorized service center.

TRANSPORTATION AND STORAGE

Stop the machine and allow it to cool before storing or

transporting. Do not store or transport the machine with

batteries fitted, remove and secure separately

Clean all foreign material from the product. Store it in a

cool dry and well-ventilated place that is inaccessible to

children. Keep away from corrosive agents such as

garden chemicals and de-icing salts. Do not store

outdoors.

For transportation, secure the machine against movement

or falling to prevent injury to persons or damage to the

machine.

Injuries may be caused, or aggravated, by prolonged use

of a tool. When using any tool for prolonged periods,

ensure you take regular breaks.

Table of contents

Other Hyundai Trimmer manuals

Popular Trimmer manuals by other brands

MTD

MTD HT 51 E manual

McCulloch

McCulloch T22 LS Operator's manual

COCKRAFT

COCKRAFT PRO HL36-S Original instructions

Grizzly

Grizzly CT 1800 Li Instructions for use

Peco

Peco Z Trimmer ZT-3000 Operator's manual

Solo

Solo 116 instruction manual

Stiga

Stiga ST 1200 specification

Echo

Echo GT-225 - 10-09 Operator's manual

RedMax

RedMax BT17 owner's manual

GreenWorks

GreenWorks STA806 Operator's manual

Parkside

Parkside PHSL 900 A3 Translation of the original instructions

Gardeo

Gardeo PRO GPTHT2560 Original instructions

Park

Park DT-810870 Operation manual

Worx

Worx WG209 owner's manual

Gardenline

Gardenline 43671/HTKS26 user guide

Makita

Makita 3710 instruction manual

Champion

Champion 100683 Operator's manual

Stihl

Stihl FS 311 instruction manual