Husky 45202 User manual
THANK YOU
We appreciate the trust and condence you have placed in Husky through the purchase of this Husky Track Wall. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Husky!
USE AND CARE GUIDE
8 FT X 4 FT TRACK WALL
Questions, problems, missing parts?
Before returning to the store, call
Husky Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday
9 a.m. - 6 p.m., EST, Saturday
Retain this manual for future use.
1-888-HD-HUSKY
HUSKYTOOLS.COM
Item #301110565
Model #45202
2
Table of Contents
Safety Information ..................................2
Warranty ..........................................2
What is covered ...................................2
What is not covered ................................2
Pre-Installation.....................................3
Planning installation ...............................3
Tools required ....................................3
Hardware included.................................3
Package Contents .................................4
Installation ........................................5
Care & Cleaning ....................................8
Service and parts ...................................8
Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Maintenance .......................................8
Troubleshooting ....................................9
Safety Information
HUSKY TRACK WALL MUST BE INSTALLED INTO WALL STUDS
It is the responsibility of the installer to ensure that wall mounting
surface and structure are sufcient in strength and capacity to
support Husky Track Wall weight and its contents. Failure to observe
these conditions may result in injury or death.
□For optimum performance, Track Wall must be mounted to
vertical wall studs spaced to 16 in. apart.
WARNING: Ensure that wall mounting surface and
structure are sufcient in strength and capacity to support
track wall weight and its contents.
CAUTION: For optimum performance, track wall must be
mounted to vertical wall studs spaced to 16 in.
Warranty
WHAT IS COVERED:
□Only panels in possession of the rst retail purchaser
□Defects in material or workmanship
WHAT IS NOT COVERED:
□Product failure that results from improper installation, misuse or abuse, alteration, or any other failure not related to defects in
materials or workmanship
□Damage due to acts of God, re, or accident
□Damage created by non-Manufacturer developed accessories such as, but not limited to, hooks or baskets
□Damage that results from loading the Track Wall beyond the stated maximum weight capacity
□The cost of return, labour, or accessory materials
3 HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
Pre-Installation
PLANNING INSTALLATION
Decide where and how high you would like your track wall section installed.
You must start and nish on studs.
Studs should be centered 16 in. apart in order to support 75 lbs per square foot.
NOTE: In order to support 75lbs per square
foot, your studs must be a maximum of 16in.apart.
TOOLS REQUIRED
Stud nder Level Pencil
Drill
Mitre saw
If you plan on
cutting your panels
Snips
For cutting trims
to length.
HARDWARE INCLUDED
Part Description Quantity
AA Square-head bit # 2 1
BB 2 in screws
(Dual Robertson & Phillips Pan head #8)
88
NOTE: It is strongly recommended to use a drill
with the included square-head bit for all driving.
AA BB
4
Pre-Installation (continued)
PACKAGE CONTENTS
Part Description Quantity
A8ft track panels 10
B97
1∕2in. horizontal J-trim 2
C8 ft L-trim 1
B
2 x 97 1/2in. J-trim C
1 x 8 ft L-trim
A
10 x 8 ft track panels
5 HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
Installation
1 Select the location for your Husky Track Wall Panels
□Both the left and right sides of Husky Track Wall Panels should fasten into studs.
□Husky Track Wall Panels are 48.5 in. height (when assembled). Select the desired elevation at which to begin assembly of your
Husky Track wall Panels and mark a horizontal level line at which to start from the bottom.
NOTE: In order to support 75lbs per square
foot, your studs must be a maximum of 16in.apart.
2 Locate and mark studs
□Once you have chosen your installation location,
verify that you are starting and nishing on a stud.
□Using a stud nder, locate all studs between start and
nish, and mark along their length with a level. You will
need to screw each panel into each stud.
3 Fasten horizontal J-trim to the wall
NOTE: For this step, it is best to have the help
of a second person.
□Use snips to cut one J-trim (B) to a lengh of 96 in.
□Install the bottom horizontal 96 in. J-trim where you
marked your level line, using screws (BB), fastening the
widest edge to the wall. Do not fasten into the rst or last
stud..
?
?
front side
wall side
96 in.
x 5
16in.
48.5 in.
96 in.
B J-trim
6
Installation (continued)
4 Install vertical J-trims
□Cut the remaining J-Trim (B) into two – 481∕2in. pieces.
□Overlap the vertical J-trim over the horizontal J-trim and secure at the bottom by fastening into the studs using screws (BB).
□The wide side should fasten to the wall as shown in inset A.
□Fasten into the stud using one screw (BB) at the top of the trim as indicated by arrows below.
□Measure the distance between left and right edges to conrm that the distance between them is 96 in.
5 Install rst panel
□Insert one side of the rst panel (A) into the vertical J-trim (B) at one side.
Curve the panel slightly to insert into the J-trim (B) at the other side.
□Ensure the panel (A) is seated into the horizontal J-trim (B) and is level. Using screws (BB),
fasten through the screw channel of the panel into each stud as marked, every 16 in.
□The rst and last screw in each panel should secure the panel and the trim to the stud.
Hook channel
DO NOT SCREW HERE
x 4x 2
x 7
x 1
NOTE: Do not drive screw through the hook channel.
Screw here
A
B
BB
BB A
7 HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
Installation (continued)
6 Continue Installation
□Insert the next panel (A) into the vertical J-trim (B) at one side.
□Curve the panel slightly to the vertical J-trim (B) at the other side. The second panel (A) should interlock over the rst panel’s
screw channel, but leaving the hook channel accessible. Properly interlocked panels will conceal all screws.
□Press down on the top of the second panel (A) to ensure that it is properly interlocked with the one below.
□Check to ensure the panel (A) is level along the entire width of the panel. Repeat this process after installing every third panel (A)
□Fasten the panel (A) to all wall studs using screws (BB).
□Repeat this process for panels 3-10.
NOTE: Screws installed at the top of the vertical J-trims may
have to be removed to complete clean installation of top panels.
x 63
x 9
Properly overlapped
8 Complete Installation
□Install your horizontal top L-trim (C) by simply clipping it into the lip above the screw cavity.
NOTE: Vertical J-Trims not included in image to show clear installation
of horizontal to L-trim.
x 1
A BB
C
8
Care and Cleaning
□Clean with soft cloth and mild detergents.
□Do not use sharp objects or abrasive cleaners.
□Dry using soft cloth.
Service Parts
Operation
Maintenance
□1-888-HD Husky to obtain missing or replacement parts.
□Statement of weight capacity: 75 lbs per square foot
□WARNING: Do not overload
□Warranty is null and void if not installed as per assembly instructions — mounted to studs.
□Husky Track Wall Panels are designed to provide multiple modular storage congurations.
□While Husky Track Wall panels are designed to provide years of maintenance-free use, annually check to ensure that all fasteners
are secure.
16 in.
Section 1
Section 2
Section 1 Section 2
No J-trim
Use two J-trims, back-to-
back between sections.
Troubleshooting
Concrete or block wall installation
□To install over concrete or cinder block, fasten 2 x 3 in.
studs or furring strips to your walls using tap cons or other
specialty fasteners rst, then proceed to install Husky
Track Wall Panels as per the Assembly Instructions.
24 in. stud centers
□Husky®Track Wall panels are designed to hold 75lbs per
square foot when installed as directed in studs spaced
16 in. apart. If your studs are wider apart, apply some
adhesive to the back of the panel if installing over drywall.
Vertical conguration installing
more than 4 ft. high
□If you are installing more than one section vertically, cut
vertical J-trims to desired height and continue panel
installation.
□Do not add additional trim between sections
for optimum results.
Horizontal Conguration
□Installing 2 sections – 16 ft. wide x 4 ft. high
Questions, problems, missing parts? Before returning to the store,
call Husky Customer Service
8 a.m.- 7 p.m., EST, Monday-Friday
9 a.m. - 6 p.m., EST, Saturday
1-888-HD-HUSKY
HUSKYTOOLS.COM
Retain this manual for future use.
This manual suits for next models
1
Table of contents
Languages:
Other Husky Tools Storage manuals
Husky
Husky HOUC3304JX1 User manual
Husky
Husky HOTC7218B11MYS User manual
Husky
Husky H40CH4TR6 User manual
Husky
Husky HPRO72TLOCKERBLK User manual
Husky
Husky HOAA52JX1 User manual
Husky
Husky HOTC8422BB1M User manual
Husky
Husky H61MWC10SR User manual
Husky
Husky H52CH6WBB User manual
Husky
Husky 75809AHR User manual
Husky
Husky HOTC6212B11M User manual
Husky
Husky 1000000000 User manual
Husky
Husky 75811AHR User manual
Husky
Husky H72CH9HD User manual
Husky
Husky HOTC5213B1OS User manual
Husky
Husky H48JSB User manual
Husky
Husky H46PWRSTATION User manual
Husky
Husky H61MWC15GWHD User manual
Husky
Husky H72MWC15R User manual
Husky
Husky HOUC3603B1QWK User manual
Husky
Husky H46X18MWC9BLK User manual
Popular Tools Storage manuals by other brands
Ryobi
Ryobi RWB03 Original instructions
Scheppach
Scheppach ts 2100 Translation from original manual
Cornwell Tools
Cornwell Tools CTB360AKBK Assembly instructions
DIVERSIFIED WOODCRAFTS
DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Assembly instruction
Cassese
Cassese CS200 CART user & parts manual
Kendall Howard
Kendall Howard ESDW-9630-1000 owner's manual
