HumanTechnik Swing User manual
DBedienungsanleitung Seite 4
EInstrucciones de servicio Página 84
IIstruzioni per l’uso Pagina 104
GB Operating instruction Page 24
FMode d’emploi Page 44
NL Gebruiksaanwijzing Pagina 64
1
2
3
4
5
6
7
12
9
11
10
81615
13
14
17
20
21
22 22
2324 25 26 27 28
18
19
Table of contents Page
English 24
Safety information 25
Box contents 26
Quick overview 27
Headphones 27
Neckloop 27
Transmitter 27
Accessories 27
Connect transmitter to a sound source 28
RCA phono socket(s) 29
SCART socket 29
Headphones socket 30
Microphone 30
Digital TOSlink socket 31
mains power supply 31
Use Swing digital 32
Use SWING digital headphone version 32
Use SWING digital LR neckloop version 32
Safety lock in the neckloop 33
Listening with the 3.5 mm stereo output 33
Pairing of transmitter and receiver 34
Set balance 35
Adjust audio 35
Set volume 36
Charge battery 37
Cleaning and care 38
Clean transmitter and receiver 38
Cleaning of silicone ear adapters 38
Exchange of the silicone ear adapters 38
Important information 39
Warranty 39
Environmental information/disposal 40
Battery 40
Troubleshooting 41
Technical Data 43
• Before you start operating this device, read these instructions carefully
and completely.
• Please retain these operating instructions so that they are accessible at
any time also for other users.
• The device and especially the power supply are designed exclusively
for operation in dry interior spaces. A flawless function is guaranteed for
a room temperature of 10 °C to 35 °C.
• Please handle the device and the accessories carefully and install them
only in low-dust and clean locations.
• Clean the transmitter and the receiver regularly. For hygienic reasons, the
soft silicone ear adapters should be cleaned regularly. Replacement soft
silicone ear adapters are available as accessories.
• Place the transmitter with care, the rubber feet may cause damage to
polished furniture.
• Only use the supplied power supply.
• We recommend to unplug the power supply from the electrical outlet if
you are absent for several days.
Caution:
High volume can be set on your receiver. Please adhere to the following
information to protect your ears or the ears of persons with normal hearing,
especially children, from hearing impairments due to a high volume.
1. Please set a low volume level before you put the receiver on.
2. During use, adjust the volume to a level agreeable to you.
3. The neckloop receiver may cause interference with heart pacemakers.
Please contact your physician or manufacturer of the pacemaker to en-
sure the pacemaker is not subject to possible interference.
4. If you use other medical devices, please use the SWING only by adhering
to the safety information/safety directives of your physician or the manu-
facturer.
Safety information
English 25
Safety information for the lithium polymer battery
The battery used in SWING is a lithium polymer battery, which was produced
in accordance with the most current provisions and safety regulations. The
battery can be damaged when misused or if not used according to the speci-
fications, in this case Humantechnik accepts no liability.
Warning!
The following risks exist in extreme cases:
– Heat development
– Fire development
– Explosion
– Smoke and gas development
• Do not heat the battery above 70°C, e.g., through sun radiation or by
casting it into fire.
• Do not subject the battery to moisture.
• Do not short circuit the battery
• Do not disassemble or deform the battery.
• Store device/battery in cool and dry places at room temperature.
• Use only the provided charger for the battery.
• Recharge the battery in the device regularly in case the device is not
used for a longer time (every 6 months for app. 1 hour).
• Charge the battery only at ambient temperatures of 10°C to 40°C.
• Do not recharge the battery if the device is clearly damaged.
• Please return defective devices or devices with worn out batteries to
your retailer.
The SWING digital / SWING digital LR system includes:
1 SWING digital receiver
1 SWING digital transmitter
1 battery AP15A
1 screwdriver
1 power supply
1 audio connection cable with 3.5 mm stereo stereo jack
1 audio adapter 3.5 mm on 6.3 mm stereo stereo jack
1 audio adapter 3.5mm - RCA Phono
1 TOSlink cable
1 pair of additional small silicone ear adapters (Headphone version)
Optional extras
SCART adapter
Microphone
Box contents
English 26
English 27
Quick overview
These operating instructions let you fold the first 2 pages out. These pages
show images of the SWING with identification by numbers.
Headphones:
1 volume control
2 speaker ear adapters
3 battery compartment
4 status LED
5 pairing button (connect)
6 balance (Bal)
7 tone adjustment left right (tone)
Neckloop:
8 On/Off switch (On / Off)
9 volume control
10 induction loop
11 safety break
12 battery compartment
13 status LED
14 pairing button (connect)
15 balance (Bal)
16 tone adjustment left right (tone)
17 stereo output 3.5mm
Transmitter:
18 charging bay
19 charge LED for receiver in charging bay
20 replacement battery charging bay
21 charge LED for additional battery charging bay
22 status LED transmitting
Accessories:
23 power supply connection
24 optical input digital
25 AUDIO, MIC / optical selector switch
26 female connector for connection to a analog sound source (green)
27 female connector for connection to a microphone (black)
28 pairing button (connect)
We congratulate you for purchasing your »SWING« headphones. You have
chosen a reliable state-of-the-art device. Please review these operating
instructions carefully to ensure that you commission the device correctly and
that you are familiar with all functions of the device.
Connect transmitter to a sound source
Please switch the sound source off before connecting the transmitter.
Several options exist to connect the SWING digital to a sound source (e.g. TV,
etc.).
Please check the connection options of your sound source.
– RCA phono female connector
– SCART female connector
– Headphones connection
– External microphone (optional)
– S/PDIF output
English 28
AUDIO OUT
LR
AV
)
)
)
)
OPTICALCOAXIAL
DIGITAL OUT
English 29
Connect transmitter to a RCA phono female connector
Plug the provided audio connection cable 29 into the green “Audio” female
connector 26 of the transmitter. Connect the adapter cable with the RCA
phono plugs 30 to the audio connection cable 29.
Plug the RCA phono plug into the RCA phono connection of your sound
source. Please ensure that the white connection is connected to the white
connection of your sound source.
Please ensure that the red connection is connected to the red connection of
your sound source.
Optionally, a S/PDIF digital audio adapter is available for connection to digital
audio sources.
Connect transmitter to a SCART connector (optional)
The SCART adapter is not included in the contents. It can be purchased from
your retailer.
Plug the provided audio connection cable 29 into the green “Audio” female
connector 26 of the transmitter. Plug the SCART adapter 31 into the audio
connection cable 29.
Plug the SCART adapter into the SCART socket of your source of sound.
29 30
29 31
26
26
Connect transmitter headphone connector
Plug the provided audio connection cable 29 into the green “Audio” female
connector 26 of the transmitter. Plug the audio connection cable 29 into the
headphone connection of your sound source.
You may need the 6.3 mm headphone plug adapter for the connection of the
headphones to your sound source. Set the volume of your sound source to an
average volume.
Connect the transmitter to the microphone (optional)
The microphone is not included in the contents. It can be purchased from
your retailer.
Plug the microphone 33 into the black “MIC” connection 27 of the transmitter.
Fasten the microphone to the loudspeaker of your sound source.
English 30
29
33
27
26
Other manuals for Swing
3
Table of contents
