Huawei SmartAX MT880 User manual

SmartAX MT880 ADSL Router

Quick Installation Guide

No part of this manual may be reproduced or transmitted in any form

or by any means without prior written consent of Huawei Technologies

Co., Ltd.

Trademarks

, HUAWEI, C&C08, EAST8000, HONET, , ViewPoint, INtess,

ETS, DMC, TELLIN, InfoLink, Netkey, Quidway, SYNLOCK, Radium,

M900/M1800, TELESIGHT, Quidview, Musa, Airbridge, Tellwin,

Inmedia, VRP, DOPRA, iTELLIN, HUAWEI OptiX, C&C08 iNET,

NETENGINE, OptiX, iSite, U-SYS, iMUSE, OpenEye, Lansway,

SmartAX, infoX, TopEng are trademarks of Huawei Technologies Co.,

Ltd.

All other trademarks mentioned in this manual are the property of their

respective holders.

Notice

The information in this manual is subject to change without notice.

Every effort has been made in the preparation of this manual to ensure

accuracy of the contents, but all statements, information, and

recommendations in this manual do not constitute the warranty of any

kind, express or implied.

Table of Contents

SMARTAX MT880 QUICK INSTALLATION GUIDE .......................1

Packing List ......................................................................................................................1

MT880 Overview ..............................................................................................................2

Preparation.......................................................................................................................3

Connect MT880................................................................................................................4

Quick Troubleshooting......................................................................................................6

Safety Concerns...............................................................................................................7

FAQs ................................................................................................................................7

Technical Specifications .................................................................................................10

Appendix ........................................................................................................................11

SmartAX MT880 Quick Installation Guide

Use this Quick Installation Guide to quickly establish your ADSL connection

and access the Internet.

Note: If there is a need to configure the device in your application, please

ask for necessary information and guidance from your ISP.

The following summarize the information useful to install MT880:

1. Packing List

2. MT880 Overview

3. Preparation

4. Connect MT880

5. Quick Troubleshooting

6. Safety Concerns

7. FAQs

8. Technical Specifications

9. Appendix

Packing List

Open the shipping carton and carefully remove all items. Ascertain that you

have:

(1) One SmartAX MT880 ADSL Router

(2) Two twisted-pair telephone cable

(3) One straight-through Ethernet cable

(4) One dedicated power adapter

(5) One Splitter

(6) One User CD-ROM

(7) One Warranty Card

MT880 Overview

MT880 gives full consideration to the household arrangements, enabling

horizontal and vertical positions as well as hanging on the wall. Please refer

to the Appendix to erect MT880 on your table.

Figure 1MT880 Profile

Figure 2Rear Panel Cable and Power Connections

•ADSL: ADSL port; connects to the Modem port of the splitter.

•Ethernet: Ethernet port; connects to the Ethernet port on your

computer or an Ethernet hub.

•Reset: Press this button and hold for three seconds to restore the

Modem to its default setting. Resetting will eliminate the

customized data, think twice before you press the button.

•Power: Power switch.

•9V AC 1A: Power plug; connects to power adapter.

In order to observe the LEDs, place the MT880 in a location where is easy to

move it.

Figure 3Front Panel Display with LED Indicators

The LED Indicators read as follows:

LED

Indicator Status Description

Power Steady green light The unit is powered on.

ADSL LINK Steady green light A valid ADSL connection.

ADSL ACT Blinking green light There is traffic over ADSL line.

Steady light A valid LAN connection.

Green light The speed of data transfer is

10Mbps.

LAN LINK

Orange light The speed of data transfer is

100Mbps.

LAN ACT Blinking green light There is traffic over Ethernet.

Preparation

Dialing Application

Under the access mode of PPPoE, if the built-in dialing function of MT880 is

disabled, you have to install additional dialing application on your computer

that enables it to connect to the ISP’s network.

Splitter

MT880 need to use a separate splitter. External splitter can divide the data

and voice and let user can dial the telephone and surf on the net meanwhile.

The external splitter has three ports:

•LINE: Connect to the wall jack;

•PHONE: Connect to the telephone sets;

•MODEM: Connect the ADSL port of MT880.

Ethernet NIC

Computer is connected to MT880 through the Ethernet port on MT880.

Ensure your computer is configured with NIC adapter as well as Ethernet

port. Besides, be sure to enable the TCP/IP protocol for your operating

system.

User Name and Password

For PPP connections you have to keep user name and password to connect

to your ISP.

Connect MT880

Place MT880 in a safe and accessible location where you can easily view

the LED indicators on the front of the device.

Note: If you want to connect one or more telephones, a spliter is

needed that works between telephones and the line from phone

Jack. For more details about connecting multiple telephones,

please refer to the FAQs.

You are now ready to connect MT880. Follow these steps:

1. Connect the ADSL line –

Method one: Plug one end of the twisted-pair ADSL cable into the

ADSL port on the rear panel of MT880 and insert the other end into

the wall socket.

Method two: Plug one end of the twisted-pair ADSL cable into the

ADSL port on the rear panel of MT880 and insert the other end into

the MODEM port of the external splitter. In this way, a telephone set

can be connected to the PHONE port of the splitter. The user can

access the Internet and make calls at the same time. Please refer to

the figure 4 for more information.

2. Connect MT880 to your computer - Use the Ethernet cable provided to

connect MT880 and your computer or notebook PC through those

10/100Base-TX Ethernet ports.

3. Connect the power adapter - Use the power adapter supplied and plug

it into a suitable power source. You should see the Power LED indicator

light up and remain lit.

When the LAN LINK LED of MT880 is on, it indicates the connection between

MT880 and your PC is okay.

(1) Computer (2) RJ-11 Tel Cable (3) Phone (4) Ethernet Cable

(5) Splitter (6) Phone Jack (7) MT880 (8) RJ-11 Tel Cable

Figure 4 Computer to MT880 Connection

Note: Use cross-over cable to connect MT880 and the uplink port of a

switch or hub. Note: The attached Ethernet cable in the packing box is a

straight-through cable. Be sure that the cable connecting the LAN to MT880

cannot exceed 100 meters.

Quick Troubleshooting

Failures Instructions

Power light is out. 1. Ensure the power adapter is well connected;

2. Ensure the right power adapter is used;

ADSL LINK light is

out.

1. Ensure the ADSL line is well connected;

2. Ensure the telephone line before entering the house

is valid, try to test with a telephone;

3. Check that there is no junction box before

connecting MT880, which has such components like

capacitors or diodes that could hinder back high

frequency signals;

4. Ensure the Router and telephones are properly

connected;

LAN LINK light is

out.

1. Ensure you use the right cables from the Router to

your PC;

2. Ensure the connection is secured;

3. Check if the NIC LED lights up;

4. Ensure your NIC works normally by examining

whether the item of “Networking Device” is labeled

with “?” or “!”. If it is, you may delete it and then

click “Refresh” to reinstall. Otherwise you may try

the NIC in another slot. As a last resort, you have to

replace the NIC;

Can’t access the

Internet.

Take the most common access mode as an example, in

which a dial-up application is installed on the user’s PC:

1. Ensure that any of the problems above is not the

reason;

2. Ensure that the dial-up application is correctly

installed and set on your PC;

3. Ensure that you have entered the right user name

and password;

4. Ensure “Use Proxy Server” is set properly for IE, if

the problem still remains even after you have log

into successfully;

5. Try more than one Web sites, in case of some Web

server’s being in failure;

Safety Concerns

(1) Place the MT880 on a stable stand or table.

(2) Use the power adapter provided along with MT880.

(3) Do not connect telephone directly to the ADSL line. Use the splitter to

connect the phone.

(4) Do not put heavy objects on top of the MT880.

(5) Do not spill liquid of any kind onto the MT880. And keep the unit clean

and in a dry environment.

(6) Break off the power supply in a stormy weather.

(7) Do not expose the MT880 to direct sunlight.

(8) Do not put the MT880 on top of the cabinet of your PC.

(9) Use a soft and dry cloth for cleaning.

(10) When not in use, please power off the MT880;

(11) Do not use junction boxes before connecting the ADSL Router, which

have such components like capacitors or diodes that could hinder back

high frequency signals.

Note:When MT880 has been used for a long time, the surface of the

shell will reach a certain temperature. Don’t worry, this is a natural

phenomenon and the Router can still work normally.

FAQs

1. Why does the ADSL Router fall off line so often?

There are many factors concerned, such as faults in your ISP access server

or ADSL Router (compatibility or quality problem), Ethernet card (low

processing speed, invalid driver), line disconnection, line disturbance and etc.

You are suggested to check the following items in your applicable range:

(1) Ensure the ADSL connector is valid;

(2) Keep the device away from heat sources, power line or highly powered

electronic equipments;

(3) Ensure no telephone or fax machine is connected directly to the ADSL

subscriber line;

(4) Update the old ISA NIC with new driver or replace it with a new 10/100M

PCI NIC;

(5) Find help on the Web site of http://support.huawei.com;

Other manuals for SmartAX MT880

Table of contents

Other Huawei Network Router manuals

Huawei

Huawei WiFi AX3 User manual

Huawei

Huawei E5785-320a User manual

Huawei

Huawei B593 User manual

Huawei

Huawei LTE CPE B593 User manual

Huawei

Huawei Mobile wifi e5330 User manual

Huawei

Huawei S3026C-PWR User manual

Huawei

Huawei AR Series User manual

Huawei

Huawei WA8021V5 User manual

Huawei

Huawei AR500 Technical specifications

Huawei

Huawei Swisscom B593s User manual

Huawei

Huawei WS5200 Technical specifications

Huawei

Huawei EchoLife HG8240 User manual

Huawei

Huawei B593s-931 Technical specifications

Huawei

Huawei AR502 Series User manual

Huawei

Huawei SUN2000-25KTL-M5 User manual

Huawei

Huawei NetEngine 8000 F Installation instructions

Huawei

Huawei AR530 Series User manual

Huawei

Huawei AR1200 Series User manual

Huawei

Huawei B681-54 User manual

Huawei

Huawei AR120 Series Technical specifications

Huawei

Huawei AR600 Series User manual

Huawei

Huawei SmartAX MT880 User manual

Huawei

Huawei NE05E Installation instructions

Huawei

Huawei WS5200 User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview