Huawei HG658 User manual
1
Modem Conguration Guide
HG658
Conguring in Layer2 PPPoE for Windows 8
IMPORTANT MESSAGE
Your modem has already been pre-configured, you do not need to follow each step of the set-up guide but should retain
this document in case you need to manually configure your equipment.
To configure your PC/Laptop with your wireless password including changing your wireless password, please
proceed to step 4.
Contents
1. Physical Connection
2. Network Configuration
3. Configuring Modem
4. Configuring Wireless
5. Change of Password
1. PHYSICAL CONNECTION
Have your modem powered on and connected directly to your PC via Ethernet Cable before you begin, as these
instructions are based on wired Ethernet connection
1. Connect the Power port on the back of your modem to your power socket.
2. Connect the DSL port on the back of the modem to your telephone wall socket.
3. Connect your telephone handset to the Phone1 port on the back of your modem.
4. Connect your PC to any of the 4 LAN ports on the back of your modem.
2. NETWORK CONFIGURATION
PPPoE connection does not require you to have an IP address or DNS settings manually encoded on your network card.
PPPoE connection uses authentication to establish the Internet connection and once connected your modem will be
assigned an IP and DNS settings from TPG.
To begin, your PC needs to receive a private IP address from the modem. Most modems have DHCP enabled by default
that will take care of this.
HG658
PC
Wi-Fi Modem
Telephone
Power Socket
Wall Socket
2
1 3 4
2
Modem Conguration Guide HG658
C. Click on Internet Protocol Version 4 (TCP/IPv4), and then click
Properties
3. CONFIGURING MODEM
A. Open your browser and in the address bar type
http://192.168.1.1 and press Enter
B. Enter admin for both the username and password and click Login.
If you have changed the login credentials, please enter the current
username and password for your modem interface.
D. Ensure “Obtain an IP address automatically” is selected
E. Ensure “Obtain DNS server address automatically” is selected
F. Click OK
To ensure your Network Card is ready for this, please follow the following steps:
A. Click Start -> Control Panel -> Network and Internet ->
Network and Sharing Center -> Change adapter settings
B. Right click on Local Area Connection and select Properties
3
Modem Conguration Guide HG658
4. CONFIGURING WIRELESS
Things you need to know before you begin:
By default the modem that you purchased from TPG is configured with the following wireless security settings:
SSID (name for the wireless connection): TPG-xxxx (xxxx is a random 4 digit alphanumeric code printed on the sticker
underneath your modem)
Authentication Type: WPA-PSK/WPA2-PSK
Encryption: TKIP/AES
Pre Shared Key: initially configured to be the same as your TPG password. You can enter your own text as an option.
C. You will see the screen shown on the right. Click Next.
F. Click Submit.
Quick Setup complete!
E. You can change your WiFi details or elect to
keep the default settings. The default WiFi SSID is
TPG-xxxx (xxxx is a random 4 digit alphanumeric
code printed on the sticker underneath your
modem). The WiFi password is set to your TPG
password by default. Click Next.
D. Enter your TPG username and password. Click Next.
4
Modem Conguration Guide
3. Find the SSID (network name) of your modem
and click Connect By default, the network name
should be TPG-xxxx (xxxx is a random 4 digit
alpha numeric code).
4. Select the Wi-Fi network you wish to connect to.
By default, the Wi-Fi access point name (SSID) is
TPG –xxxx (xxxx is a random 4 digit alphanumeric code)
5. Enter the network security key (Wi-Fi password)
and then click Next. By default, the network
security key is the same as your TPG Password
you use to log into Your Account.
2. Click Settings inside the Charms Bar.
HG658
5. CHANGE OF PASSWORD
For security purposes we highly recommend that you change your password if you are using your default or if you believe your
password security has been compromised. For password information, please visit www.tpg.com.au/support.
PLEASE NOTE:
Each time your modem is powered on, it will initialize this automated authentication process after which your modem will
receive a public IP address (fixed or dynamic depending on your plan) and DNS settings from TPG.
13 14 23tpg.com.au/support
To use Wireless, ensure that you already have set up your wireless adapter.
1. Open the Charms Bar by moving your mouse pointer to the top corner of the screen and then moving your
mouse pointer down. If you have a touch screen, simply swipe from the right side of the screen to the left.
Other manuals for HG658
3
Table of contents
Other Huawei Network Router manuals
Huawei
Huawei V100R006C00 User manual
Huawei
Huawei WS319 User manual
Huawei
Huawei Quidway NetEngine80E User manual
Huawei
Huawei S1700 Series User manual
Huawei
Huawei AR1200 Series Guide
Huawei
Huawei AR3200 Series User manual
Huawei
Huawei B535-232 Technical specifications
Huawei
Huawei AR1200-S Series Guide
Huawei
Huawei AF23 User manual
Huawei
Huawei S6700 Series Guide
Huawei
Huawei EchoLife EG8245H5 User manual
Huawei
Huawei HW-02G User manual
Huawei
Huawei B525 User manual
Huawei
Huawei WS5200 User manual
Huawei
Huawei NetEngine5000E User manual
Huawei
Huawei Quidway S9300 User manual
Huawei
Huawei Quidway NetEngine 20 series User manual
Huawei
Huawei HG659 User manual
Huawei
Huawei AR1200 Series User manual
Huawei
Huawei ADSL2+Broadband Router Aolynk DR814 User manual
