Huawei HG655a User manual

HUAWEI HG655a

Home Gateway Quick Start

1 Introduction

1.1 Contents in the package

HG655a Splitter Power Adapter

Telephone Cables Ethernet Cable User CD-ROM

General Public

License

Warranty Card

1.2 The Front Panel of the HG655a

The front panel of the HG655a provides the following indicators:

zOne power indicator: POWER

zOne ADSL indicator: DSL

zOne Internet indicator: INTERNET

zFour LAN indicators: LAN1,LAN2,LAN3,LAN4

zOne VoIP indicator: VOIP

1.3 The Rear Panel of the HG655a

The rear panel of the HG655a provides the following interfaces and buttons:

zOne ADSL interface: DSL

zTwo RJ-11 phone interfaces: PHONE1, PHONE2

zFour LAN interfaces: LAN1,LAN2,LAN3,LAN4

zOne RESET and ON/OFF buttons: RESET, ON/OFF

zOne POWER interface: POWER

2 Installation Guide

To connect the cables for installing the HG655a, do as follows:

1 Telephone jack on the wall 2 Splitter 3 Telephone

4 PC 5 Set-top box 6 Power adapter

2.1 Connecting the HG655a to the Fixed Network

Step 1 Connect the telephone jack on the wall to the LINE interface on the splitter

with a telephone cable. Connect the telephone to the PHONE interface on the

splitter with a telephone cable.

####

#### ####

LINE PHONE

Step 2 Connect the DSL interface on the HG655a to the MODEM interface on the

splitter with a telephone cable.

2.2 Connecting telephones to the HG655a

Connect a telephone to the PHONE1 or PHONE2 interface of the HG655a. The

connection methods are as follows:

zIf you have two VoIP numbers, you can connect two telephones to the PHONE1

and PHONE2 interfaces respectively.

zIf you have no VoIP number and use only the PSTN function, then connect the

telephone to the PHONE interface through splitter, refer to 2.1 Connecting the

HG655a to the Fixed Network.

2.3 Connecting the PC to the HG655a

Connect Ethernet interface on the computer to any of the four LAN interfaces on the

rear panel of HG655a with an Ethernet cable.

2.4 Supplying Power to the HG655a

Connect the power adapter to the power interface on the back of the HG655a and plug

the power adapter into a wall outlet.

After you power on the HG655a, the DSL indicator blinks (for less than three

minutes), which indicates that the HG655a is being activated. After the DSL

indicator stops blinking, the POWER and DSL indicators turn solid on, which

indicates that the HG655a is working properly.

3 Configuring the HG655a

You can access the Internet by use the following two methods:

zUsing the Embedded PPP Dial-Up Software of the HG655a to Get Online

zUsing the PPP Dial-Up Software of the Computer to Get Online

Please use the parameters provided by your internet service provider (ISP) for

configuration. If the configuration is wrong, you will not be able to access the

Internet.

Using the Embedded PPP Dial-Up Software of the

HG655a to Get Online

Step 1

Step 2

Step 3

Configure the HG655a to enable the embedded dial-up function

1. Connect the HG655a with your computer by using the Ethernet cable.

2. Start Internet Explorer on your computer and enter the http://192.168.1.1

in the address bar, and then press Enter.

3. The Login dialog box is displayed.

4. Enter the administrator name (admin by default) and password (admin

by default) in the Login dialog box, and then click OK.

Configure the ATM PVC.

1. In the navigation tree, choose Basic > ATM.

2. Click New.

3. Enter VPI and VCI in the VPI/VCI text box provided by the Internet

Service Provider.

4. Select EoA from the DSL link type option button, and keep the default

settings of other parameters.

5. Click Submit.

Just keep the default settings for PTM.

Enable the embedded dial-up function

1. In the navigation tree on the left of the Web-based configuration utility,

choose Basic > WAN.

2. Click New.

3. Select a PVC from the Layer2 interface drop-down combo box.

The HG655a supports ADSL/VDSL compliance uplink. When choose the ADSL

uplink mode, the name of PVC should be composed by the value of VPI and VCI.

When choose the VDSL uplink mode, the name of PVC should begin with ptm.

4. Select VOICE_TR069_INTERNET from the Service list drop-down

combo box.

5. Select Route from the Connection mode drop-down combo box.

6. Select PPPoE option button for Connection type.

7. Enter the user name and password that are provided by the network

operator in the User name and Password text boxes, and keep the default

settings of other parameters.

8. Click Submit to save the settings.

After you complete the preceding settings, you can surf the Internet. You need to

perform the preceding operations on a computer once only.

Using the PPP Dial-Up Software of the Computer to Get

Online

Step 1

Step 2

Configure the HG655a to work in the bridge mode

For details, refer to the Step 3 in section "Using the Embedded PPP Dial-Up Software

of the HG655a to Get Online." Note that Bridge is selected from the Connection mode

drop-down combo box.

Configure your computer

The PPP dial-up software is pre-installed on certain computer operating systems. To

create a dial-up connection, do as follows (taking the Windows XP operating system as

an example):

1. Choose Start > All Programs > Accessories > Communications >

Network Connections.

2. Click Create a new connection in Network Tasks to display the New

Connection Wizard window, and then click Next.

3. Select Connect to the Internet, and then click Next.

4. Select Set up my connection manually, and then click Next.

5. Select Connect using a broadband connection that requires a user

name and password, and then click Next.

6. Enter the name (as desired) of the dial-up connection in ISP Name, and

then click Next.

7. Select Anyone's use or My use only, and then click Next.

8. Enter the user name and password provided by the Internet Service

Provider and used for the dial-up connection, and then click Next.

9. Select Add a shortcut to this connection to my desktop, and then click

Finish.

To access the network, double-click the icon for the dial-up connection on the desktop

of your computer, enter the password and username provided by the Internet Service

Provider, and then click Connect. You need to perform the preceding operations only

once for creating a network connection.

Trademarks and Permissions

, , and are trademarks or registered trademarks of Huawei

Technologies Co., Ltd.

Other trademarks, product, service and company names mentioned are the property of

their respective owners.

NO WARRANTY

THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED

BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN

RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL

HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL,

INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS,

REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.

Issue: 01 (2009-11-03)

Part Number: 201171

Other manuals for HG655a

Table of contents

Other Huawei Gateway manuals

Huawei

Huawei Echolife HG520b User manual

Huawei

Huawei EchoLife HG520s User manual

Huawei

Huawei EchoLife HG520s User manual

Huawei

Huawei HG630 V2 User manual

Huawei

Huawei B970b User manual

Huawei

Huawei HG655a User manual

Huawei

Huawei HG658d User manual

Huawei

Huawei EchoLife BM635 WiMAX CPE User manual

Huawei

Huawei ECHOLIFE HG520C User manual

Huawei

Huawei EchoLife HG8247 User manual

Huawei

Huawei EchoLife HG520 User manual

Huawei

Huawei E960 HSDPA User manual

Huawei

Huawei B686 User manual

Huawei

Huawei eA660 Series Technical specifications

Huawei

Huawei B933 series User manual

Huawei

Huawei B890 Instruction manual

Huawei

Huawei eLTE2.2 eA660 Series User manual

Huawei

Huawei H350L/B890-66s User manual

Huawei

Huawei DAU eA300-8a User manual

Huawei

Huawei HG523 User manual

Huawei

Huawei EchoLife HG510 User manual

Huawei

Huawei HG655b User manual

Huawei

Huawei HG552d User manual

Huawei

Huawei eA380 User manual

Popular Gateway manuals by other brands

LST

LST M500RFE-AS Specification sheet

Kinnex

Kinnex Media Gateway quick start guide

2N Telekomunikace

2N Telekomunikace 2N StarGate user manual

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Original instructions

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE user guide

Telsey

Telsey CPVA 500 - SIP Technical manual

RTA

RTA 460A-NNA4 Product user guide

Shaw

Shaw Gateway HDPVR user manual

ABB

ABB VSN900 Commissioning manual

Commander

Commander Pulse owner's manual

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E manual

NETGEAR

NETGEAR C6300BD installation guide

Amit

Amit CDW531AM user guide

HMS

HMS Netbiter EasyConnect EC150 user manual

AT&T

AT&T U-verse 3801 Replacement self-installation guide

Logic IO

Logic IO RTCU MX2 turbo Technical manual

Suttle

Suttle MediaMAX MXM-521 installation instructions

RTA

RTA 460MCBC-N2E Product user guide