Huawei HG610 User manual

HUAWEI HG610 Home Gateway

User Guide

HUAWEI TECHNOLOGIES CO., LTD.

HUAWEI HG610 Home Gateway

V100R001

User Guide

Issue 01

Date 2009-12-30

Part Number 202178

Huawei Technologies Co., Ltd. provides customers with comprehensive

technical support and service. Please feel free to contact our local office

or company headquarters.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website: http://www.huawei.com

Email: [email protected]

rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means

without prior written consent of Huawei Technologies Co., Ltd.

The product described in this manual may include copyrighted software of Huawei

Technologies Co., Ltd and possible licensors. Customers shall not in any manner

reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse

engineer, lease, assign, or sublicense the said software, unless such restrictions are

prohibited by applicable laws or such actions are approved by respective copyright

holders under licenses.

Trademarks and Permissions

, , and

are trademarks or registered trademarks of Huawei

Technologies Co., Ltd.

Other trademarks, product, service and company names mentioned are the property of

their respective owners.

Notice

Some features of the product and its accessories described herein rely on the software

installed, capacities and settings of local network, and may not be activated or may be

limited by local network operators or network service providers. Thus the descriptions

herein may not exactly match the product or its accessories you purchase.

Huawei Technologies Co., Ltd reserves the right to change or modify any information or

specifications contained in this manual without prior notice or obligation.

NO WARRANTY

THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS

REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR

CONTENTS OF THIS MANUAL.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE

SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL,

INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS,

BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.

Import and Export Regulations

Customers shall comply with all applicable export or import laws and regulations and will

obtain all necessary governmental permits and licenses in order to export, re-export or

import the product mentioned in this manual including the software and technical data

therein.

Contents

1Warnings and Precautions ....................................................................... 1

2Connecting Cables and Powering On...................................................... 3

2.1 Simple Connection .......................................................................................3

2.2 Connecting One Telephone ..........................................................................1

2.3 Connecting Multiple Telephones .................................................................2

2.4 Powering On ................................................................................................2

3Setting the Network-Access Parameters ................................................. 3

3.1 Using the Embedded PPP Dial-Up Software on the HG610 ........................3

3.2 Using the PPP Dial-Up Software on Your Computer...................................4

4Basic Configuration .................................................................................. 5

4.1 Changing the Administrator Password .........................................................5

4.2 Changing the Login IP Address ...................................................................5

4.3 Restoring Default Settings............................................................................6

5FAQs........................................................................................................... 6

6Appendix.................................................................................................. 10

6.1 Indicators....................................................................................................10

6.2 Interfaces and Buttons................................................................................10

6.3 Default Settings..........................................................................................11

6.4 Technical Specifications.............................................................................11

1 Warnings and Precautions

Thank you for purchasing the HUAWEI HG610 Home Gateway (hereinafter referred to

as the HG610).

To use the device properly and safely, read these warnings and precautions carefully

and strictly observe them during operation.

Unless otherwise specified, the device described in this section includes

the device and its accessories.

Basic Requirements

zDuring storage, transportation, and operation of the device, keep it dry and prevent

it from colliding with other objects.

zDo not dismantle the device. In case of any fault, contact an authorized service

center for assistance or repair.

zWithout authorization, no organization or individual can change the mechanical,

safety, or performance design of the device.

zWhen using the device, observe all applicable laws and regulations and respect the

legal rights of other people.

Environmental Requirements for Using the Device

zBefore connecting and disconnecting cables, stop using the device, and then

disconnect it from the power supply. Ensure that your hands are dry during

operation.

zKeep the device far from sources of heat and fire, such as a heater or a candle.

zKeep the device far from electronic appliances that generate strong magnetic or

electric fields, such as a microwave oven or a refrigerator.

zPlace the device on a stable surface.

zPlace the device in a cool and well-ventilated indoor area. Do not expose the device

to direct sunlight. Use the device in an area with a temperature ranging from 0°C to

40°C.

zDo not block the openings on the device with any object. Reserve a minimum space

of 10 cm around the device for heat dissipation.

zDo not place any object (such as a candle or a water container) on the device. If any

foreign object or liquid enters the device, stop using the device immediately, power

and then remove all the cables

d due to lightning strikes.

zd, for example, in

low the instructions indicated in text or symbols.

in the same box as inflammable liquids, gases,

get affected, the warranty for the

an injury may occur.

zt the power adapter meets the requirements of Clause 2.5 in

it is tested and approved according to national or local

y may

ce and its accessories by mistake, or they may swallow the small

device, causing suffocation or other dangerous situations.

ze or unusual

act an authorized service center.

it off, remove all the cables connected to it, and then contact an authorized service

center.

zDuring thunderstorms, power off the device,

connected to it to prevent it from getting damage

eas with Inflammables and Explosives

Do not use the device where inflammables or explosives are store

a gas station, oil depot, or chemical plant. Otherwise, explosions or fires may occur.

In addition, fol

zDo not store or transport the device

or explosives.

cessory Requirements

Use only the accessories supplied or authorized by the device manufacturer.

Otherwise, the performance of the device may

device or the laws and regulations related to telecommunications terminals may

become null and void, or

zDo not use the power adapter if its cable is damaged. Otherwise, electric shocks or

fires may occur

zEnsure that the power adapter meets the specifications indicated on the device

nameplate.

Ensure tha

IEC60950-1/EN60950-1 and

standards.

Safety of Children

Keep the device and its accessories out of the reach of children. Otherwise, the

damage the devi

components of the

intenance

zIf the device is not used for a long time, power it off, and then remove all the cables

connected to it.

If any exception occurs, for example, if the device emits any smok

sound or smell, stop using the device immediately, power it off, remove all the

cables connected to it, and then cont

zDo not trample, pull, or overbend any cable. Otherwise, the cable may get damaged,

causing malfunction of the device.

cables U Do not use any

clea ing

zBefore leaning the device, stop using it, power it off, and then remove all the

se a clean, soft, and dry cloth to clean the device shell.

agent or spray to clean the device shell.

heated, which will not affect the function of the HG610.

After the HG610 is used for a certain period of time, the cover will be

2 Connecting Cables and Powering On

2.1 Simple Connection

If y not

need the

cabl

our telephone line is used for the broadband network access only and if you do

to use a telephone, take the following figure as a reference for connecting

es.

DSLLAN4LAN3LAN2LAN1RESETON/OFF POWER

1. Telephone jack on the wall 2. Computer 3. Power adapter

2.2 Connecting One Telephone

If your telephone line is used for both the broadband network access and a telephone

connection, take the following figure as a reference for connecting the cables.

PHONE MODEM

LINE

DSLLAN4LAN3LAN2LAN1RESETON/OFF POWER

1. Telephone jack on the wall 2. Splitter 3. Telephone

4. Computer 5. Power adapter

2.3 Connecting Multiple Telephones

If your telephone line is used for the broadband network access, telephone connections,

and fax connections, take the following figure as a reference for connecting the cables.

PHONE MODEM

LINE

DSLLAN4LAN3LAN2LAN1RESETON/OFFPOWER

1. Telephone jack

on the wall

2. Splitter 3. Telephone 4. Computer

5. Power adapter 6. T connector 7. Microfilter 8. Fax machine

2.4 Powering On

To power on the HG610, press the power button on the back panel of the HG610.

After you power on the HG610, the DSL indicator blinks (for less than three minutes),

which indicates that the HG610 is being activated. Later, the DSL indicator turns solid

on. The POWER indicator is also solid on, which indicates that the HG610 is working

properly.

3 Setting the Network-Access Parameters

By configuring the HG610 and your computer, you can choose any of the following

methods to surf the Internet:

zUsing the Embedded PPP Dial-Up Software on the HG610

zUsing the PPP Dial-Up Software on Your Computer

3.1 Using the Embedded PPP Dial-Up Software on

the HG610

If you select this method for accessing the network, the HG610 starts to set up a dial-up

connection automatically after the startup. You can access the network after you power

on your computer. You do not need to install any special dial-up software on your

computer or perform dial-up operations on your computer. To configure the HG610 and

your computer for the network access, do as follows:

Step 1 Log in to the Web-based configuration utility of the HG610.

1. Launch the Internet Explorer on your computer. Enter http://192.168.1.1

in the address bar, and then press Enter.

2. In the displayed dialog box, enter the user name and the password, and

then click Log In.

By default, both the user name and the password are admin. After the user name and

the password are verified, you can access the Web-based configuration utility.

Step 2 Configure the ATM PVC.

1. In the navigation tree, choose Basic > ATM.

2. Enter VPI/VCI provided by the network operator.

3. Set DSL link type to EoA.

4. Click Submit.

Step 3 Set WAN parameters.

1. In the navigation tree, choose Basic > WAN.

2. Select a PVC from the Layer2 interface drop-down list box.

zThe name of this PVC should begin with atm.

zThe DSL link type of this ATM PVC should be EoA.

3. Select Enable for WAN connection.

4. Select a service from the Service list drop-down list box.

5. Select Route from the Connection mode drop-down list box.

6. Set Connection type to PPPoE.

7. Enter the user name and password provided by the network operator.

Table of contents

Other Huawei Gateway manuals

Popular Gateway manuals by other brands

LST

LST M500RFE-AS Specification sheet

Kinnex

Kinnex Media Gateway quick start guide

2N Telekomunikace

2N Telekomunikace 2N StarGate user manual

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Original instructions

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE user guide

Telsey

Telsey CPVA 500 - SIP Technical manual

RTA

RTA 460A-NNA4 Product user guide

Shaw

Shaw Gateway HDPVR user manual

ABB

ABB VSN900 Commissioning manual

Commander

Commander Pulse owner's manual

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E manual

NETGEAR

NETGEAR C6300BD installation guide

Amit

Amit CDW531AM user guide

HMS

HMS Netbiter EasyConnect EC150 user manual

AT&T

AT&T U-verse 3801 Replacement self-installation guide

Logic IO

Logic IO RTCU MX2 turbo Technical manual

Suttle

Suttle MediaMAX MXM-521 installation instructions

RTA

RTA 460MCBC-N2E Product user guide