Huawei B932 series User manual

Wonderful Communication, Mobile Life.

Welcome to HUAWEI B932/933 Series Wireless Gateway

HUAWEI B932/933 Series Wireless Gateway

User Guide

Notice

Co., Ltd.

1No part of this manual may be reproduced or

transmitted in any form or by any means without

prior written consent of Huawei Technologies

Co., Ltd.

Trademarks

3and HUAWEI are trademarks of Huawei

Technologies Co., Ltd. All other trademarks and

trade names mentioned in this manual are the

property of their respective holders.

Notice

5The information in this manual is subject to

change without notice. Every effort has been

made in the preparation of this manual to ensure

accuracy of the contents, but all statements,

information, and recommendations in this man-

ual do not constitute the warranty of any kind,

expressed or implied.

Huawei Technologies Co., Ltd.

Address:

6Administration Building, Huawei Technologies

Co., Ltd., Bantian, Longgang District, Shenzhen,

P. R. China

Postal Code: 518129

Website: http://www.huawei.com

Read the safety precautions carefully to ensure the

correct and safe use of your wireless device. For

detailed information, see "Warnings and

Precautions."

Do not switch on your device when the

device use is prohibited or when the

device use may cause interference or

danger.

Do not use your device while driving.

Follow the rules or regulations in

hospitals and health care facilities.

Switch off your device near medical

apparatus.

Switch off your device in an aircraft. The

device may cause interference to

control signals of the aircraft.

Switch off your device near high-

precision electronic devices. The

device may affect the performance of

these devices.

Do not attempt to disassemble your

device or its accessories. Only qualified

personnel are allowed to service or

repair the device.

Do not place your device or its

accessories in containers with strong

electromagnetic field.

Do not place magnetic storage media

near your device. Radiation from the

device may erase the information

stored on them.

Do not put your device in a high-

temperature place or use it in a place

with flammable gas such as a gas

station.

Keep your device and its accessories

away from children. Do not allow

children to use your device without

guidance.

Use approved accessories only to avoid

explosion.

Safety Precautions

Observe the laws or regulations on

device use. Respect others’privacy

and legal rights when using your

device.

Table of Contents 1

Quick Start 1

Appearance ................................................1

Installation ..................................................1

Power On/Off the Device............................3

Viewing the Running Status .....................3

Make a Call ................................................4

Dial-up Access ...........................................4

Restoring the Factory Defaults...................4

Using the Management Page 5

Management Page Overview .....................5

Access the Internet.....................................6

View Configuration Information ..................7

Quick Setup................................................7

Validating Quick Setup ...............................8

Configuring Your Computer 9

Confige the Network Connection................9

Disabling Proxy Settings ............................9

Advanced Settings 10

Overview ..................................................10

System Management ...............................10

SIM/UIM Settings .....................................11

Mobile Network Settings...........................12

Dial-up Settings ........................................13

DHCP Settings ........................................14

Security Settings (Optional) 16

Firewall Switch ......................................... 16

LAN MAC Filter ........................................ 16

LAN IP Filter............................................. 17

Virtual Server ........................................... 17

DMZ Settings ........................................... 19

UPnP Settings.......................................... 19

Remote Management .............................. 19

Troubleshooting 21

Warnings and Precautions 23

Electronic Device ..................................... 23

Hospital .................................................... 23

Traffic Safety............................................ 23

Storage Environment ............................... 23

Children Safety ........................................ 24

Operating Environment ............................ 24

Cleaning and Maintenance ...................... 24

Abbreviations 26

Table of Contents

1Quick Start

Note

The supported functions and displayed

appearance are subject to your product

purchased. Pictures posted for illustration

purpose only. Please refer to the product for

actual appearance. For details of your product

selection, consult your service provider.

Appearance

Installation

Step 1: Insert the SIM Card

Warning

Before inserting or removing the SIM card, you

must disconnect the device from the power

adapter.

Insert the card into the slot completely, as show in the

following figure.

To remove the card, press the card gently. Now the

card will pop up automatically.

Step 2: Connect to the Power Adapter

Use a power adapter that is compatible with the

device; otherwise, the device may be damaged.

Antenna

Charger

Ethernet

Phone

On/Off

Signal indicator

Mode indicator

LAN indicator

Power indicator

Pedestal

Installation

Step 3: Connect to a PC

If the indicator of the Ethernet interface connecting

with a network cable is on, the connection is

successful. The Ethernet cable cannot be longer than

100 meters (328 feet). To achieve better effect, use

the shielded cable.

Step 4: Connect to a Telephone Set

The communication quality of the telephone set can

be interfered by the wireless signal. Place the

telephone set one meter away from the device.

Step 5: Connect the External Antenna (Optional)

Connect the external antenna cable with the antenna

jack on the main unit. Screw the antenna to make

sure that the antenna is tightly connected with the

antenna jack.

Note

You can choose whether to use the external

antenna. In the area covered with strong signal

strength, you can switch to the antenna internal

and uninstall the external antenna. In the area

covered with weak signal strength, you can

install the external antenna and switch to the

antenna external. For details of antenna

selection, consult your local dealer.

Step 6: Place the device

Internal/External

Power On/Off the Device

Quick Start

Warning

To avoid electrical devices from interfering by

the wireless signal, place electrical devices one

meter away from the device.

The device can be placed horizontally on a table,

hanging against the wall, or standing against the

pedestal. Place the device on a higher place or near

the window, so it can receive stronger signals.

Power On/Off the Device

Press and hold the On/ Off button to power on or off

the device.

Viewing the Running Status

Indicator Status

Power Steady on and in yellow, the device is

switched on successfully.

LAN Blinking: data is transmitting.

Signal • Fast blinking in red: the card faults (the

card does not exist or the PIN code is not

verified);

• Steady on and in red: signal strength in

level one (weak);

• Steady on and in yellow: signal strength

in level two or three (middle);

• Steady on and in green: signal strength in

level four or five (strong).

Make a Call

When you hear the dial tone after picking up the

handset, you can make a call.

Dial-up Access

By default, the device dials up to access the Internet

as required. You can directly use the network

services such as web browsing, and receiving or

sending emails.

If you need to configure the other device-related

parameters, you need to access the device

management page (http://192.168.1.1). For details,

please read on.

Restoring the Factory Defaults

If you need to reconstruct the network or you forget

the changes of some parameters, you can choose to

restore factory defaults and reconfigure the device.

Reset: Press and hold it to restore the factory

defaults.

Note

After this operation, all configurations are

restored to the defaults.

Mode • Double blinking in green: searching the

network;

• Blinking in green: registering with the 2G

network;

• Steady on and in green: 2G data service

connected;

• Fast blinking in green: Downloading the

upgrade mode;

• Blinking in blue: registering with the 3G

network;

• Steady on and in blue: WCDMA data

service connected;

• Steady on and in cyan: HSPA data

service connected.

Indicator Status

Reset

Other manuals for B932 series

This manual suits for next models

Table of contents

Other Huawei Gateway manuals

Popular Gateway manuals by other brands

LST

LST M500RFE-AS Specification sheet

Kinnex

Kinnex Media Gateway quick start guide

2N Telekomunikace

2N Telekomunikace 2N StarGate user manual

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Original instructions

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE user guide

Telsey

Telsey CPVA 500 - SIP Technical manual

RTA

RTA 460A-NNA4 Product user guide

Shaw

Shaw Gateway HDPVR user manual

ABB

ABB VSN900 Commissioning manual

Commander

Commander Pulse owner's manual

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E manual

NETGEAR

NETGEAR C6300BD installation guide

Amit

Amit CDW531AM user guide

HMS

HMS Netbiter EasyConnect EC150 user manual

AT&T

AT&T U-verse 3801 Replacement self-installation guide

Logic IO

Logic IO RTCU MX2 turbo Technical manual

Suttle

Suttle MediaMAX MXM-521 installation instructions

RTA

RTA 460MCBC-N2E Product user guide