Huawei TE40 User manual

HUAWEI TE40&TE50&TE60 Videoconferencing Endpoint

Quick Installation Guide



What's in the Box (TE60)

HD-VI cable (1)

TE60

Power cable (1) Network cable (1)

Used for main video input, this cable

connects the HD-VI ports on the endpoint

and HUAWEI VPC620 or VPC600.

DVI-HDMI cable (1)

DVI-VGA cable (1)

DVI-S-Video/VGA/CVBS cable (1)

This cable provides two male connectors, one

connecting to the endpoint's video output port

and one to a display device's HDMI port.

This cable provides two male connectors. It

is recommended that this cable be used to

connect the endpoint's presentation input port

to a presentation input source (a computer for

example).

This cable provides one DVI male

connector and one S-Video/VGA/CVBS

female connector. It transmits S-Video,

VGA, or CVBS signals to display devices

that support these signals.

DVI-S-Video/HDMI/CVBS cable (1)

S-Video/RCA cable (1)

Mounting ear (2) and screw (4)

This cable provides one DVI male connector

and one S-Video/HDMI/CVBS female

connector. It transmits S-Video, HDMI, or

CVBS signals to display devices that support

these signals.

The red and white RCA connectors connect

to external audio output devices (speakers for

example).

The yellow S-Video connectors are used for

S-Video signal input and output.

Mounting ears: Secure the endpoint to a

cabinet.

Screws: Attach the mounting ears to the

endpoint.

Quick Start Guide

Remote control Qualification Card

Warranty Card Safety Precautions



What's in the Box (TE50 or TE40)

TE50 or TE40

Power cable (1)

Network cable (1)

HDMI cable (1)

VGA cable (1)

HD-VI cable (1)

This cable provides two male connectors, one

connecting to the endpoint's video output port

and one to a display device's HDMI port.

This cable provides two male connectors,

one connecting to a presentation video

source's input or output port, and one to the

endpoint's VGA/YPbPr input or output port.

Used for main video input, this cable

connects the HD-VI ports on the endpoint

and HUAWEI VPC620 or VPC600.

S-Video/RCA cable (1)

The red and white RCA connectors connect to

external audio output devices (speakers for

example).

The yellow S-Video connectors are used for S-

Video signal input and output.

Mounting ear (2) and screw (4)

Mounting ears: Secure the endpoint to a

cabinet.

Screws: Attach the mounting ears to the

endpoint.

Remote control Qualification Card

Safety Precautions

Warranty Card

Quick Start Guide

The item pictures are for your reference only. The cables in the box can be used only with the endpoint in the same box.



Installation

The voltage inside the endpoint is high. To reduce the risk of electric shock, do not remove the cover on your own. Follow the

instructions of a professional engineer.

The TE60, TE50, and TE40 have the same dimensions: H x W x D = 61.5 mm x 435 mm x 265.5 mm (2.42 in. x 17.13 in. x

10.45 in.). The installation instructions for these three endpoint models are also the same. The typical installation option is

horizontal placement.

Horizontal Placement

Place the endpoint on a flat tabletop and connect the cables.

Placement in a Cabinet

Ensure that the cabinet is a 19-inch cabinet compliant with IEC 60297, for example, the HUAWEI N68E-22 cabinet.

Reserve at least 2 U (2 U = 88.9 mm/3.5 in.) space above the endpoint for heat dissipation.

1. Using a Phillips screwdriver, remove the base by loosening the four screws holding it in place.

2. Remove the rubber pads at the four corners of the bottom.

3. Using a Phillips screwdriver, attach the mounting ears to the sides of the endpoint as shown.

4. Slide the endpoint into the cabinet and use screws through the mounting ears to hold the endpoint in place.

The screws in this step are not provided.



Connecting Cables

The cable connections shown in the following are recommended. The illustrations are for your reference only.

TE60

The VGAcable is not provided with the endpoint.

The HD-AI cable is provided with a microphone.

TE50

1.1

One VGAcable is provided with the endpoint. It is connected to the VGA/YPbPr input or output port.

The HD-AI cable is provided with a microphone.

TE40

1.2

One VGAcable is provided with the endpoint. It is connected to the VGA/YPbPr input or output port.

The HD-AI cable is provided with a microphone.



Powering On the Endpoint

With all cables connected, connect the endpoint to a power supply and turn the power switch to ON.

When the Status

Indicator Is...

The Endpoint Is...

When the Status Indicator

Is...

The Endpoint Is...

Blinking blue twice

per second

Starting.

Blinking purple once

every 2 seconds

In sleep mode.

Steady blue

Working properly.

Blinking blue four times

per second

Being updated.

Steady purple

Powered off (the power

switch is ON, and the

endpoint is powered off by

pressing on the remote

control).

Blinking blue once

Responding to a remote control

operation.

When the Alarm

Indicator Is...

The Endpoint Is...

When the Alarm

Indicator Is...

The Endpoint Is...

Blinking red twice per

second

Overheated.

Blinking red four times

per second

Encountering a temperature fault.

For example, the temperature

sensor inside the endpoint cannot

sense the current operating

temperature, causing fast fan

rotation speed and loud fan noise.



Loading the Configuration File

Using a USB Device

The endpoint automatically loads the configuration file on a USB device, such as a USB flash drive. After the configuration

file is loaded, the endpoint should work properly.

The USB device is provided by your operator or Huawei's reseller or service engineers. Huawei's service engineers provide

the configuration file, which you must not modify unless requested to do so.

To load the configuration file on the USB device:

1. Use the USB configuration tool to import the configuration file to a USB device. For details, see the HUAWEI

TE40&TE50&TE60 Videoconferencing Endpoint Deployment Guide.

2. Insert the USB device into the endpoint's USB port.

3. In the displayed dialog box, select Yes.

4. Using the remote control, enter the administrator password, which is 12345678 by default.

The endpoint automatically loads the configuration file and restarts.

If the endpoint is powered on for the first time and you do not operate it for 10 seconds, the endpoint also automatically loads the

configuration file and restarts.

5. After the restart is complete, remove the USB device.

Using Other Methods

You can also use the methods described in the "Configuring the videoconferencing endpoint" section in the HUAWEI

TE40&TE50&TE60 Videoconferencing Endpoint V100R001C01 Quick Start Guide.

To obtain more documentation for the TEX0, visit http://enterprise.huawei.com and choose SUPPORT > Product Support > Unified

Communications and Collaboration > Telepresence and Videoconferencing > Videoconferencing Endpoints > Group Endpoints.

Other manuals for TE40

This manual suits for next models

Table of contents

Other Huawei Conference System manuals

Huawei

Huawei VP9050 User manual

Huawei

Huawei TE30 User manual

Huawei

Huawei 9000 VCT V100R011 Service manual

Huawei

Huawei V100R001 User manual

Huawei

Huawei Airbridge DBS3900 User manual

Huawei

Huawei MA5833-BS60 User manual

Huawei

Huawei DP300 User manual

Huawei

Huawei U-SYS IAD 101S User manual

Huawei

Huawei Box 500 User manual

Huawei

Huawei RP100 User guide

Huawei

Huawei TE30 User manual

Huawei

Huawei TP3106-70 User manual

Huawei

Huawei TX50 User manual

Huawei

Huawei Box 700 Operating and safety instructions

Huawei

Huawei Telecom Power TP48200A-DT19C1 User manual

Huawei

Huawei TE10 Operating and safety instructions

Huawei

Huawei V600R019C00 User manual

Huawei

Huawei RP100 User manual

Huawei

Huawei TP3106-70 Operating and safety instructions

Huawei

Huawei TP3106 User manual

Huawei

Huawei TP3106-55 User manual

Huawei

Huawei TE30 Operating and safety instructions

Huawei

Huawei AirPresence Key User manual

Huawei

Huawei Bar 300 User manual

Popular Conference System manuals by other brands

Kramer

Kramer VIA GO quick start guide

AVT

AVT MAGIC AC1 Go Configuration guide

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO user manual

Sony

Sony PCS-I150 Operation guide

Middle Atlantic Products

Middle Atlantic Products VTC Series instruction sheet

Prentke Romich Company

Prentke Romich Company Vanguard Plus Setting up and using

Speakerbus

Speakerbus iD 712 user guide

Trelleborg

Trelleborg SafePilot CAT PRO user guide

Sennheiser

Sennheiser ADN instruction manual

ADTRAN

ADTRAN NetVanta 7100 Configuration guide

AINA

AINA PTT Voice Responder quick guide

Yamaha

Yamaha ProjectPhone PJP-100H owner's manual

vissonic

vissonic VLI Series user manual

Panasonic

Panasonic KX-VC500 user manual

Poly

Poly Trio 8300 user guide

Crestron

Crestron Mercury CCS-UCA-SMK Do guide

Inmarsat

Inmarsat mini M manual

Tenveo

Tenveo ALL-IN-ONE manual