Huawe WATCH D User manual
WATCH D
USER GUIDE
Contents
Getting Started
Buttons and screen control 1
Pairing and connecting to wearable devices 2
Measure the wrist circumference and select a strap and airbag 4
Wearing the watch 5
Setting the time and language on the watch/band 6
Setting the AOD watch face 6
Conguring Gallery watch faces 6
Locking or unlocking 7
Customising the function of the Down button 7
Charging 8
Updating the watch 8
Powering on, powering o, and restarting the watch 9
Blood pressure management
Blood pressure measurement results are dierent each time 10
The blood pressure measured at home is dierent from that
measured at the hospital
10
Measuring blood pressure 11
Care for health
Measuring SpO2 17
Automatic SpO2 measurements 17
Sleep monitoring 17
Measuring your skin temperature 18
Live a healthy life 19
Starting a workout 20
Viewing workout records 21
Workout status 21
Recording daily activities 22
Automatic workout detection 22
Assistant
HUAWEI Assistant·TODAY 23
Message management 23
Rejecting incoming calls on your watch 24
Controlling music playback 24
Torch 24
Remote shutter 24
Voice assistant 25
Adding custom cards 25
i
Getting Started
Buttons and screen control
The watch is equipped with a colour touchscreen that is highly responsive to your touches
and can be swiped in dierent directions.
Up button
Operation Function Remarks
Press once •Wake watch screen when
the screen is o.
•Access the app list screen
from the home screen.
•Return to the home screen.
-
Press and hold •Power on the watch when
the watch is o.
•Access the restart/power o
screen when the watch is
on.
Down button
Operati
on
Function Remarks
Press
once
Enable the Blood pressure app
(enabled by default).
Access the set customised feature.
There are certain exceptions such as for
calls and workouts.
Press and
hold
Wake up the voice assistant. Voice assistant is only supported in some
countries/regions.
Gestures
Operation Function
Touch Choose and conrm.
Touch and hold on the home screen Change the watch face.
Swipe up on the home screen View notications.
Swipe down on the home screen View the shortcut menu.
Swipe left or right View watch feature cards.
Swipe right Return to the previous screen.
1
Wake the screen
•Press the Up button.
•Raise or rotate your wrist inwards.
•Swipe down on the home screen to open the shortcut menu. Enable Show Time for the
screen to stay on for ve minutes.
•HarmonyOS/Android users can enable or disable Show Time on the Device settings
screen of the Huawei Health app.
•iOS users can enable or disable Show Time on the device details screen of the Huawei
Health app.
Turn o the screen
•Lower or rotate your wrist outwards, or use your palm to cover the watch face screen.
•Perform no operations for a period of time after you wake the screen by pressing the
button or raising your wrist.
Press the Up button to access the app list screen and go to Settings > Display >
Advanced to adjust the duration it takes for the watch screen to turn o.
You cannot turn o the screen by covering the standby watch face screen with your
palm.
Pairing and connecting to wearable devices
Before using the device, pair it with your phone. Ensure that your phone meets all the
following requirements:
•Your phone must run HarmonyOS 2, Android 6.0, iOS 9.0, or later. (Some devices must be
paired with iOS 12.)
•The phone runs the latest version of the Huawei Health app. For details on how to
download and install the app, see Installing the Huawei Health app.
•Bluetooth and location services are enabled on your phone, and the Huawei Health app is
authorised to access your phone's location.
Installing the Huawei Health app
Before pairing your phone with your device, download and install the Huawei Health app on
your phone. If you have already installed the app on your phone, update it to its latest
version.
•Huawei phones
The Huawei Health app is installed on your phone by default. If you are unable to nd this
app on your phone, you can download and install it from AppGallery.
•Non-Huawei Android phones
Getting Started
2
If you are using a non-Huawei Android phone, you can download and install the Huawei
Health app through either of the following ways:
•Visit https://appgallery.cloud.huawei.com/appdl/C10414141, or scan the following QR
code to download and install the Huawei Health app.
•Search for the Huawei Health app in the app store on your phone, and follow the
onscreen instructions to download and install the app.
•Visit https://appgallery.cloud.huawei.com/app/C10414141 to download and install
HUAWEI AppGallary. Search for the Huawei Health app on HUAWEI AppGallery, and
follow the onscreen instructions to download and install the app.
•iPhone
Search for the Huawei Health app in the App Store, and follow the onscreen instructions
to download and install the app.
Pairing and connecting
•Huawei/Non-Huawei Android phones
1Press and hold down on the Up button to power on the device, and select a language.
Once the device is powered on, Bluetooth will enter pairing mode by default.
2Place the device close to your phone, open the Huawei Health app on your phone, touch
in the upper right corner, and then touch ADD. Your phone will automatically scan
for available devices. Select the device you wish to pair with, and touch LINK.
You can also touch > SCAN to scan the onscreen QR code. Your phone will then
display Pairing….
3Once a pairing request is displayed on the device screen, touch √, and follow the
onscreen instructions OK/Allow/Agree to complete the pairing.
•iPhone
1Press and hold down on the Up button to power on the device, and select a language.
Once the device is powered on, Bluetooth will enter pairing mode by default.
2Open the Huawei Health app on your phone, touch in the upper right corner, and
then touch SCAN to scan the QR code on your device. On your phone, follow the
onscreen instructions and touch Yes > Next.
You can also place your device close to your phone, open the Huawei Health app on
your phone, touch in the upper right corner, touch ADD, and then follow the
onscreen instructions to select your device from the pop-up.
Getting Started
3
3Follow the onscreen instructions to go to Settings > Bluetooth and select your device
for pairing. Once a pairing request is displayed on the device screen, touch √.
4When a pop-up requests a Bluetooth pairing via the Huawei Health app, touch Pairing.
A pop-up will display, asking you whether to allow the device to display notications.
Touch Allow.
5Wait for about 10 seconds until the Huawei Health app displays a message indicating
that the pairing is successful. Touch Done to complete the pairing.
Measure the wrist circumference and select a strap
and airbag
Measuring your wrist's circumference and selecting a suitable strap
1At a position on your wrist that is about the width of two ngers away from the bottom
of your palm, put the end of the ruler that comes with the watch through the buckle on
the head.
2Pull the ruler until it touches your arm, but don't pull it too tightly. Record the position
indicated by the arrow.
3Select the strap and airbag based on the scale value.
Replacing the strap and airbag with ones in suitable sizes
1Open the strap nail buckle and the upper and lower buckles of the airbag.
2Press the cover button and pull up the airbag to separate the airbag cover from the body
of the watch.
3Push the lever inwards and pull the strap outwards.
4Align one side of the strap to be installed with the watch body, push the lever inwards,
and fasten it.
5Align the airbag with the air nozzle and press the airbag cover.
Getting Started
4
6Align the end of the strap with the buckle and insert the strap into the buckle.
7After adjusting the tightness, fasten the airbag buckle.
Adjust the strap based on your wrist's circumference.
1Open the watch buckle and airbag buckle.
2Select the size of the strap based on the measurement, and then fasten the nail buckle.
3Fasten the airbag buckle to nish adjusting the strap.
Wearing the watch
To ensure the accuracy of the measurement, place the watch body in the middle of the back
of your wrist. The edge of the watch's body should be below the root of the ulnar styloid
process, and should not press the root of the ulnar styloid process or be too far away from it.
Getting Started
5
The centre of the watch's face should be on your wrist about two ngers width away from
the palm.
Do not attach a protector to the back of your watch. Your watch's bottom cover contains a
sensor that can identify your body. If the sensor is blocked, the identication may fail or be
inaccurate, aecting heart rate, ECG, blood oxygen, and sleep data measurements.
Setting the time and language on the watch/band
After you have synced data between your device and phone/tablet, the system language will
be synced to your device as well.
If you change the language and region or change the time on your phone/tablet, the
changes will automatically sync to the device as long as it is connected to your phone/tablet
via Bluetooth.
Setting the AOD watch face
After the Always on display (AOD) feature is enabled, the current watch face will be
displayed when you raise your wrist if the main watch face doesn't come with a built-in AOD
watch face.
Setting AOD
1In the app list, go to Settings > Watch face or Settings > Watch face & home, and
enable AOD.
2Go to AOD style > Default style and select your preferred style. The style will then be
displayed when the main watch face doesn't come with a built-in AOD watch face and
you raise your wrist.
Conguring Gallery watch faces
Before using this feature, update the Huawei Health app and your device to their latest
versions.
Selecting Gallery watch faces
1. Open the Huawei Health app, touch Devices and then your device name, and go to Watch
faces > More > Mine > On watch > Gallery to access the Gallery settings screen.
2. Touch + and select either Camera or Gallery as the method for uploading an image.
Getting Started
6
3. Touch √ in the upper right corner, and then touch Save. Your watch will then display the
selected image as the watch face.
Other settings
On the Gallery settings screen:
•Touch Style, Position, and Function to set the style, location of the date and time and
functions on the Gallery watch faces.
•Touch the Cross icon in the upper right corner of a selected photo to delete it.
Locking or unlocking
You can set a PIN on the device to bolster your privacy. After you have set a PIN and enabled
Auto-lock, you will need to enter the PIN to unlock the device and enter the home screen.
Setting a PIN
1Set a PIN.
Swipe down on the home screen of the device, go to Settings > PIN > Set PIN, and follow
the onscreen instructions to set a PIN.
2Enable Auto-lock.
Swipe down on the home screen of the device, go to Settings > PIN, and enable Auto-
lock.
If you forget the PIN, you will be required to restore the device to its factory settings.
Changing the PIN
Swipe down on the home screen of the device, go to Settings > PIN > Change PIN, and
follow the onscreen instructions to change the PIN.
Disabling the PIN
Swipe down on the home screen of the device, go to Settings > PIN > Disable PIN, and
follow the onscreen instructions to disable the PIN.
Forgot the PIN
If you have forgotten the PIN, restore the device to its factory settings and try again.
•Method 1: Open the Huawei Health app, touch Devices and your device name, and then
select Reset.
•Method 2: After you enter an incorrect password for ve times, touch Reset.
Once you have restored your device to its factory settings, all of its data will be cleared,
so please proceed with caution.
Customising the function of the Down button
1Press the Up button to open the app list and then go to Settings > Down button.
Getting Started
7
2Select an app and customise the function of the Down button.
After you have nished customising the function, return to the home screen and press the
Down button to open the current app.
Charging
Charging
1Connect the charging cradle to a power adapter and then connect the power adapter to a
power supply.
2Rest your watch on top of the charging cradle and align the metal contacts on your watch
to those of the cradle until a charging icon appears on the watch screen.
3After the watch is fully charged, the indicator will display 100%. When your watch is at
100%, it will automatically stop charging.
•You are advised to use a Huawei power adapter, a USB port of a computer, or a non-
Huawei power adapter that complies with corresponding regional or national laws and
regulations as well as regional and international safety standards, to charge your
watch. Other chargers and power banks that do not meet corresponding safety
standards may cause issues such as slow charging and overheating. Exercise caution
when using them. It is recommended that you purchase a Huawei power adapter from
an ocial Huawei sales outlet.
•Keep the charging port dry and clean to prevent short circuits or other risks.
•The charging cradle tends to attract metal objects due to it being magnetic. Therefore,
it is necessary to check and clean the cradle before use. Do not expose the charging
cradle to high temperatures for a long time, as this may cause it to demagnetise or
cause other problems.
Checking the battery level
Method 1: Swipe down from the top of the home screen to check the battery level.
Method 2: Connect your watch to a power supply and check the battery level on the charging
screen.
Method 3: View the battery level on a watch face that displays the battery level.
Method 4: Check the battery level on the device details screen in the Health app.
Updating the watch
Method 1: Open the Huawei Health app, touch Devices and your device name, then touch
Firmware update. Your phone will then check for the available updates. Follow the onscreen
instructions to complete the update.
Method 2: Go to Settings > System & updates > Update and touch Update. Follow the
onscreen instructions to complete the update.
Getting Started
8
Table of contents
