HP 345646-001 - StorageWorks NAS 2000s External Storage... Installation and operating instructions
Application Note
hp StorageWorks
Online Volume Growth
Product Version: 1
First Edition (May 2004)
Part Number: 372413-001
This application note summarizes important information regarding OVG provided with the HP StorageWorks
Service Release 1 not covered in other documents.
For the latest version of these Application Notes and other NAS server documentation, access the HP storage
web site at:
http://www.hp.com/country/us/eng/prodserv/storage.html
.
2OVG Application Notes
© Copyright 2004 Hewlett-Packard Development Company, L.P.
Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for
incidental or consequential damages in connection with the furnishing, performance, or use of this material.
This document contains proprietary information, which is protected by copyright. No part of this document may be photocopied,
reproduced, or translated into another language without the prior written consent of Hewlett-Packard. The information contained in this
document is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP
shall not be liable for technical or editorial errors or omissions contained herein.
Microsoft®, MS-DOS®, MS Windows®, Windows®, and Windows NT® are U.S. registered trademarks of Microsoft Corporation.
Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein. The information is provided
“as is” without warranty of any kind and is subject to change without notice. The warranties for Hewlett-Packard Company products are
set forth in the express limited warranty statements for such products. Nothing herein should be construed as constituting an additional
warranty.
OVG Application Notes
First Edition (May 2004)
Part Number: 372413-001
About this document
3OVG Application Notes
About this document
This section describes the content reflected in this document, including:
■Intended audience, page 3
■Other documentation, page 3
■Requirements, page 3
■Installation, page 5
■VDS configuration settings, page 6
■VDS configuration utility, page 6
Intended audience
This document is intended for customers who have installed the HP StorageWorks Service
Release 1.
Other documentation
Additional documentation, including white papers and best practices documents, are available
via the HP web site at:
http://www.hp.com
.
Overview
The Online Volume Growth (OVG) feature provided with the HP NAS Service Release 1,
provides the ability to expand a virtual disk on Windows Server 2003 without a reboot through
use of Microsoft VDS (Virtual Disk Service).
Caution: Although OVG is supported on the EVA 5000 with a HP NAS server, make sure
that you have read all of the accompanying documentation and understand the
requirements and known issues associated with OVG.
Requirements
Currently, OVG is only supported on the HP NAS 4000s and 9000s with an EVA 5000
attached. In addition, Microsoft Virtual Disk Service (VDS) is also required. To utilize VDS,
the HP StorageWorks VDS Hardware Provider must be installed. The HP VDS Hardware
Provider enables volume and logical unit management of HP arrays from a central
management console on the NAS. VDS provides a single interface for managing block storage
virtualization.
To download the HP StorageWorks VDS hardware provider and installation guide, go to:
http://www.hp.com/support/vdsvss
Requirements
4OVG Application Notes
Hardware requirements
The following components are required for OVG on a NAS server:
■HP StorageWorks EVA 5000 disk array with a SAN Management Appliance (SMA)
running CommandView EVA
■Ethernet connection between the EVA 5000 and the CommandView EVA workstation.
The hardware providers use ports 12301 and 2301, and these ports must be free and
available in order for the Hardware Providers to function.
■SAN fabric must be in place
Known issues
The following known issues exist when using OVG on the NAS:
■Only single-head systems are supported; clusters are not supported at this time.
■Only a single EVA can be attached to the SAN Management Appliance (SMA). Multiple
EVAs cause extended query times and inconsistent operation.
■Only basic disks can be extended; dynamic volume LUNs will be extended but will record
an error when trying to extend the volume.
Note: Dynamic volumes can be extended using Disk Manager.
■Only simple and spanned dynamic volumes can be extended.
Possible issues
The following may slow or prevent OVG from working properly on the NAS:
■Ports 12301 or 2301 unavailable
■A slow firewall between the EVA 5000 and the CommandView EVA workstation
■The HP Open View Storage Management Appliance with VCS 3.0 and CommandView
EVA version 3.0a
■Hardware Provider production server running Windows 2003
■Excessive traffic on the Ethernet
Note: Your HP account representative can assist you in determining the supported configurations for
your system.
Installation
5OVG Application Notes
Installation
Installation requires two separate installation procedures:
■OVG
■Virtual Disk Service (VDS)
Installing OVG
During the installation of Service Release 1, the option to install the OVG feature is given. The
default is not to install OVG. Click the check box to install OVG.
Installing the Virtual Disk Service (VDS)
Installing the VDS Hardware Provider on an EVA disk array enables all of the VDS
management features of storage virtualization.
VDS Requirements
■The primary LUN to be managed by the hardware provider services must be visible to the
NAS system where the providers are installed.
■The VDS hardware provider user account must have administrator privileges for
CommandView EVA.
Note: The installation instructions provided with the downloaded file state that Volume Shadow
Copy Service (VSS) must be installed first and that BUSINESS COPY must also be available. This is
an XP requirement and can be ignored for NAS installations.
To install the VDS Hardware Provider:
1. Download the HP VDS Provider from:
http://www.hp.com/support/vdsvss
2. Double-click hp_StorageWorks_vss_vds_hardware_providers.exe to
extract the program files.
3. Double-click hp StorageWorks VDS Hardware Provider for EVA.msi to
launch the installer.
4. Accept the licensing agreement and install the product in the default location.
5. Follow instructions on screen. When requested,
a. Enter the IP address of the Storage Management Appliance (SMA).
b. Click Logon, then enter User name and password (Default: administrator:
administrator).
c. Select Enterprise Virtual Array (EVA) Storage System.
d. Add the disk groups which OVG will use to the selected disk groups.
Note: If logon fails, reboot both SMA and NAS servers until a logon completes
Using Online Volume Growth
6OVG Application Notes
VDS configuration settings
At the Configuration Utility, enter the appliance IP address for management of the EVA disk
array and click the Logon button. This will populate the other fields on this screen with disk
group information. Choose one disk group to add to the selected disk groups field.
This is the disk group that will be used for VDS activities.
Figure 1: VDS configuration utility
Using Online Volume Growth
OVG offers three separate features for LUN management:
■LUN Creation
■LUN Expansion
■LUN Deletion.
Figure 2: OVG screen of WebUI
Using Online Volume Growth
7OVG Application Notes
Special considerations when using OVG
■Large EVA configurations may take large amounts of time to load on the HP
StorageWorks NAS screen. During this time, there will be no system activity.
■When creating a LUN using OVG, there is a minimum of 1 GB required for the LUN size.
■Ensure that the disk group contains enough free space before using OVG to extend a LUN
LUN creation
To create a LUN:
1. Click the Create LUN from the Tasks Column.
2. Select the RAID protection level.
3. Enter the desired LUN size (GB).
4. Click OK.
Expanding a LUN
To expand a LUN:
1. Select the LUN to be expanded.
2. Click the Extend LUN button.
3. Enter the additional size in GB.
4. Click OK.
Deleting a LUN
Note: Deleting a LUN can take a few minutes. While the LUN is being deleted no system activity will
be provided on screen.
To Delete a LUN:
1. Select the LUN to be deleted.
2. Click the Delete LUN button.
Caution: Deleting a LUN will delete all data on that LUN permanently.
3. Confirm the deletion of the LUN by clicking the OK button.
Other manuals for 345646-001 - StorageWorks NAS 2000s External Storage...
2
This manual suits for next models
3
Table of contents
Other HP Software manuals
HP
HP Deskjet 812c Instruction Manual
HP
HP ProLiant DL320e User manual
HP
HP Data Protector IDB Purge User manual
HP
HP Pavilion w1200 - Desktop PC User manual
HP
HP StorageWorks MSA 2/8 - SAN Switch User manual
HP
HP BladeSystem bc2000 - Blade PC Service manual
HP
HP D6030A - NetServer - E50 User manual
HP
HP BladeSystem bc2000 - Blade PC User manual
HP
HP C7791C - DesignJet 130 Color Inkjet Printer Configuration guide
HP
HP Pavilion t700 - Desktop PC Operating manual
HP
HP Rx2620-2 - Integrity - 0 MB RAM User manual
HP
HP BladeSystem Dual NC370i - Multifunction Network... User manual
HP
HP NAS 1200s Instruction Manual
HP
HP Rx2620-2 - Integrity - 0 MB RAM User manual
HP
HP JetCAPS User manual
HP
HP StoreFabric SN6500B Service manual
HP
HP C8000 - Workstation - 0 MB RAM Instruction Manual
HP
HP StorageWorks 8B - FC Entry Switch User manual
HP
HP BB118BV - StorageWorks Data Protector Express... Operation instructions
HP
HP CN088A - Serif PosterDesigner Pro Operation instructions
