HP 3000 - 37XE System Instruction Manual
HP StorageWorks 3000/5000
Enterprise Virtual Array connectivity
4.1A for VMwarereleasenotes
Part number: 5697-7037
First edition: October 2007
Legal and notice information
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Version: VCS 4.100
Description
This document describes VMware operating system connectivity support for HP StorageWorks
3000/5000 Enterprise Virtual Array (EVA3000/5000) controller software.
A complete library of EVA3000/5000 documentation is available on the HP support website:
http://www.hp.com/support/manuals.
Under storage,clickDisk Storage Systems, and then select either HP StorageWorks 3000 Enterprise
Virtual Array or HP StorageWorks 5000 Enterprise Virtual Array under EVA Disk Arrays.
Update recommendation Routine
Supersedes 4.007
Product models
EVA3000/5000
Devices supported
This version supports the operating system specifications listed in Table 1.
Table 1 Operating system specifications
VMware version Fibre Channel
adapter Adapter BIOS/EFI Adapter driver
version (minimum)
FCA2214
nl
281541-B21
FCA2214DC
nl
321835-B21
1. 4 5 7. 0 4
BL20p G2 FC
Mezzanine
nl
300874-B21
BL20p G3 FC adapter
nl
361426-B21
BL30p, BL35p FC
balcony
nl
354054-B21
1. 4 5 7. 0 4
VMware ESX 2.5.2, 2.53,
2.54
BL25p, BL45p
nl
HPBALCF 105
nl
3818 81 - B 21
1. 4 8 7. 0 4
A7388A
A7387A
A7560A
LP10000/ LP10000DC
FCA2404/
FCA2404DC
FCA2354
VMware ESX 2.5.3, 2.54
FCA2355
1. 70 a 3 2.01 g _ v m w 1
HP StorageWorks 3000/5000 Enterprise Virtual Array connectivity 4.1A for VMware release notes 3
VMware version Fibre Channel
adapter Adapter BIOS/EFI Adapter driver
version (minimum)
FCA2214 / FCA2214DC
BL20p G2 (FC Mezz
Card)
BL20p G3 (FC Adapter
Card)
1. 45
BL25p, BL45p (HPBALCF
105) 1. 4 8
BL30p, BL35p (FC
Balcony Card) 1. 45
7.04.00 (ESX 3.0.0)
nl
7. 07.0 4 / 7. 0 4 . 00 (ESX
3.0.1)
FC1143
FC1243
FC1142
FC1242
QMH2462 [HP C-Class
Mezz Card]
1.16 7.07. 0 0 ( ES X 3.0.0)
nl
7. 07.0 4 ( ES X 3. 0 .1)
A7388A/A7387A
A7560A
LP10000/LP10000DC
FCA2404/
FCA2404DC
FCA2355/FCA2354
7.1.14 ( E S X 3 .0 . 0 )
nl
7. 3 . 2 _ v m w 2 / 7.1.14
(ESX 3.0.1)
FC2143
FC2243
FC2142SR
FC2242SR
VMware ESX 3.0.0, 3.0.1
LPe1105-HP [HP C-Class
Mezz card]
1. 70 a 3
7.3.2_vmw1 (ESX 3.0.0)
nl
7. 3 . 2 _ v m w2 (ESX 3.0.1)
VMware GSX 3.2
VMware Workstation 5
VMware GSX and VMware Workstation software products run as an
application on Microsoft and Linux operating systems. These applications are
storage independent and leverage our standard operating system support
offerings.
NOTE:
VMware HBA drivers are embedded in the ESX system software.
Enhancements
The following are major enhancements included in this release:
•This release includes support for EVA3000/5000 controller software VCS 4.100. For details about
VCS 4.100, see HP StorageWorks 3000/5000 Enterprise Virtual Array release notes (VCS 4.100).
4
NOTE:
You must have VCS 3.028 installed before upgrading to VCS 4.00x or later. HP recommends that
you do a full system backup before an HP service representative performs the migrating procedure.
Prerequisites
Multiple-path support
VMware operating software includes multipath support. No additional software is required to achieve
high-availability, multipath capability.
For detailed VMware multipathing information, see the description of the vmkmultipath command in
the ESX server administrator’s guide.
NOTE:
Secure Path and other MPIO software are not supported with VMware.
For more information about multipath options, see the HP multipath website:
http://h18006.www1.hp.com/products/sanworks/multipathoptions/index.html
VCS 3.028 to VCS 4.00x migration
The Active/Active failover feature in VCS 4.00x impacts host configurations. Contact your HP service
representative to configure your system and perform the migration procedure.
Compatibility/interoperability
This release provides full support for all previous EVA controller software used in an existing SAN
configuration.
Host type for VMware
To ensure smooth system operation with VCS 4.00x or later, set the host type to VMware.Seethe
VMware connectivity for the 3000/5000 Enterprise Virtual Array installation and reference guide for
more information.
Switch support
This release supports the Fibre Channel (FC) switches and firmware versions listed in the HP StorageWorks
SAN design reference guide, available for download on the HP support website:
http://www.hp.com/support/manuals
Under storage,clickStorage Networking, and then select HP StorageWorks SAN under HP StorageWorks
SAN Solutions.
NOTE:
HP recommends that you
not
mix switch firmware versions in your storage area network (SAN). It is a
best practice to uniformly upgrade all switches in the SAN.
HP StorageWorks 3000/5000 Enterprise Virtual Array connectivity 4.1A for VMware release notes 5
HP StorageWorks Storage System Scripting Utility
The latest version of the Storage System Scripting Utility (SSSU) is available on the software downloads
HP website:
http://www.hp.com/support/downloads
Under storage,click Storage Software, and then select HP StorageWorks Command View EVA under
Storage Device Management Software. Select the version of the HP StorageWorks Command View EVA.
NOTE:
The SSSU cannot run from an ESX or a GSX server. You must use a server running an SSSU-supported
guest Virtual Machine operating software, such as Windows® or Linux®.
Avoiding problem situations
The following sections describe problems that may arise and their solutions.
SSSU
Changing comments on a disk enclosure
Use HP Command View EVA to change comments on a disk enclosure. If you try to change a disk
enclosure comment using SSSU, the following error message appears:
Error: Invalid Operation
Changing the name of a disk enclosure
Changing the name of a disk enclosure is not supported with SSSU or HP Command View EVA. If you try
to change a disk enclosure name using SSSU, the following error message appears:
Error: Invalid Operation
Host considerations
This section contains information and important reminders about the host server.
ProLiant BIOS with multiple HBAs
IfyouhaveaProLiantserverwithoneormoreHBAsinstalled,youmustchangetheMPSTableMode
setting in the BIOS; otherwise, the system may not be able to detect all attached devices.
To change the setting:
1. Press F1 to access the ROM-Based Setup Utility (RBSU) during power-on self-test (POST).
Thistypicallyoccursafter5iDiskArrayinitialization.
2. Select System Options > OS Selection > Windows.
3. Select Advanced Options > MPS Table Mode.
4. Select FULL TABLE APIC.
5. Press Esc twice, and then press F10 to save the configuration.
6
Other manuals for 3000 - 37XE System
3
This manual suits for next models
2
Table of contents
Other HP Software manuals
HP
HP Brio BA200 User manual
HP
HP Xw460c - ProLiant - Blade Workstation User manual
HP
HP iPAQ 4500 Installation guide
HP
HP PCL 5 User manual
HP
HP KAYAK XM600 Instruction Manual
HP
HP StorageWorks 2/16 - SAN Switch User manual
HP
HP Compaq 2210b User manual
HP
HP JetCAPS User manual
HP
HP Data Protector A.06.11 Quick setup guide
HP
HP StorageWorks 2/32 - SAN Switch Instruction Manual
HP
HP Xw460c - ProLiant - Blade Workstation User manual
HP
HP StorageWorks 8/8 - SAN Switch Instruction Manual
HP
HP PROLIANT 56976839 How to use
HP
HP Rx2620-2 - Integrity - 0 MB RAM User manual
HP
HP HPE XP P9500 User manual
HP
HP BladeSystem bc2000 - Blade PC User manual
HP
HP A4500A - VMEbus Single Board Computer 744... Instruction Manual
HP
HP ProLiant DL320e User manual
HP
HP HPE XP P9500 Instruction Manual
HP
HP ProLiant SL170s - G6 Server User manual
