HP xb31 User manual
Ceiling Mount User’s Guide
4Ceiling Mounting Procedure:
Before installation, refer to the
“Adjusting the Projected
Image” section of the Projector
User’s Guide for the projection
distance based upon the de-
sired image size. Use this
projection distance to locate the
ceiling mount.
Drill four holes into the structural ceiling
member.
Attach the ceiling rod to the ceiling with the
four cylinder screws.
HP recommends that a
competent carpenter or
electrician install this
ceiling mount.
Structural Ceiling
Ceiling Rod
Cylinder Screw
Ceiling Bracket
Make necessary roll and yaw adjustments to the
projector.
180°
(YAWADJUSTMENT)
vv
vv
vAdjust the appropriate ceiling projection image mode from the “Management” menu tab in the
on screen display.
Three Bracket Screws
Be sure to install the
projector into a solid,
structural ceiling member:
u
wx
v
Attach the ceiling bracket to the ceiling rod with
the round thumbscrew. Height adjustments can
be made by using different holes on the ceiling
rod and ceiling bracket.
vv
vv
vThe total adjustment range is15.75 to
25.6 inches (40~65cm). Adjusments can be made
in one inch (2.5cm) increments.
±60°
(ROLLADJUSTMENT)
Round Thumbscrew
P/N 36.85807.001-A
Mount the projector to
the ceiling mount bracket
with the three bracket
screws.
±20°
Other manuals for xb31
2
Other HP Projector manuals
HP
HP AX325AA User manual
HP
HP vp6320 Series User manual
HP
HP Compaq iPAQ mp1200 User manual
HP
HP mp3220 Series User manual
HP
HP ep9010 - Instant Cinema Digital Projector User manual
HP
HP mp3130 User manual
HP
HP ep7100 User manual
HP
HP vp6200 - Digital Projector User manual
HP
HP vp6100 series User manual
HP
HP mp3222 - Digital Projector User manual
HP
HP Ep7110 - Home Cinema Digital Projector SVGA... User manual
HP
HP xp7000 User manual
HP
HP sb21 User manual
HP
HP xb31 User manual
HP
HP BP5000 User manual
HP
HP vp6300 Series User manual
HP
HP MP100 User manual
HP
HP sb21 User manual
HP
HP Ep7110 - Home Cinema Digital Projector SVGA... User manual
HP
HP IP400 User manual
