HP F650g User manual

f650g
Car Camcorder
User Manual

1
Contents
Regulatory notices............................................................................... 3
WEEE Notice......................................................................................... 3
CE Regulatory Notice ........................................................................... 3
Notes on Installation ........................................................................... 3
Caution ................................................................................................ 4
1Introduction..........................................................................6
1.1 Features................................................................................... 6
1.2 Package Contents .................................................................... 6
1.3 Product Overview..................................................................... 7
2Getting Started .....................................................................8
2.1 Storage Media.......................................................................... 8
2.1.1 Insert the Memory Card ............................................... 8
2.1.2 Remove the Memory Card............................................ 8
2.2 Installing in Vehicles ................................................................ 9
2.2.1 Mount to Windshield .................................................... 9
2.2.2 Adjust the Camcorder................................................. 10
2.3 Connecting to Power.............................................................. 11
2.4 LED Indicator.......................................................................... 11
2.5 Powering the Camcorder On / Off .......................................... 12
2.5.1 Auto Power On/Off..................................................... 12
2.5.2 Manual Power On/Off................................................. 12
2.5.3 Reset .......................................................................... 12
2.6 Initial Settings........................................................................ 13
2.6.1 Set Time Zone ............................................................ 13
2.6.2 Set the Date / Time .................................................... 14
3Using the Car Camcorder ......................................................15
3.1 Automatic Record .................................................................. 15
3.1.1 The Recording Screen................................................. 16
3.1.2 Emergency Recording ................................................ 18

2
3.2 Add Speed Point..................................................................... 18
3.3 Picture in Video...................................................................... 19
3.4 Driving Safety ........................................................................ 19
3.4.1 Speed Cam Alert......................................................... 20
3.4.2 Speed Limit Alert........................................................ 21
3.4.3 Driver Fatigue Alert .................................................... 22
3.4.4 LDWS.......................................................................... 22
3.4.5 FCWS .......................................................................... 24
3.4.6 Headlight Warning ..................................................... 25
4Adjusting the Settings .........................................................33
4.1 Using the Menu ...................................................................... 33
4.2 Menu Items ............................................................................ 33
5Installing the Software........................................................38
6SuperCar.............................................................................39
7Specifications .....................................................................40

3
About this Guide
The content in this document is for information purpose and is subject to
change without prior notice. We have made every effort to ensure that
this User Guide is accurate and complete.
However, no liability is assumed for any errors or omissions that may
have occurred.
The manufacturer reserves the right to change the technical
specifications without prior notice.
Regulatory notices
This document provides country- and region-specific non-wireless and
wireless regulatory notices and compliance information for your product.
Some of these notices may not apply to your product.
WEEE Notice
Disposal of Waste Electrical and Electronic Equipment and/or Battery
by users in private households in the European Union
This symbol on the product or on the packaging indicates
that this cannot be disposed of as a household waste. You
must dispose of your waste equipment and/or battery by
handling it over to the applicable take-back scheme for the
recycling of electrical and electronic equipment and/or
battery. For more information about recycling of this
equipment and/or battery, please contact your city office,
the shop where you purchased the equipment or your
household waste disposal service. The recycling of
materials will help to conserve natural resources and ensure
that it is recycled in a manner that protects human health
and environment.
CE Regulatory Notice
The product herewith complies with the requirements of the Low Voltage
Directive 2014/35/EU, the EMC Directive 2014/30/EU, and the RoHS
Directive 2011/65/EU.
Notes on Installation
1. Please measure the front windshield viewing area, make sure not to
block driver's front view, install the camcorder below the rearview

4
mirror (the central, higher right position of the front windshield). And
we recommend that the sky and the land occupied by the screen
50%, fix the car holder and then adjust the camcorder so that the
lane is aligned with the screen. Proper installation enables the
camcorder to maximize the efficiency also can enhance the accuracy
of LDWS.
2. Make sure that the lens is within the wiping range of the windscreen
wiper to ensure a clear view even when it rains.
3. Do not touch the lens with your fingers. Finger grease may be left on
the lens and will result in unclear videos or pictures. Clean the lens
on a regular basis.
4. Do not install the camcorder on a tinted window. Doing so may
damage the tint film.
5. Make sure that the installation position is not hindered by the tinted
window.
6. This product is suitable for light windshield or light color
heat-resistant film windows , it will affect video quality if install it on
the dark windows or dark heat-resistant film windows.
7. Use the products of the attached power charger only, please do not
use other brand power charger, in order to avoid equipment burn or
cause the battery explosion.
Caution
Due to local laws and vehicles safety considerations, do not
operate the camcorder while driving.
Set up time zone, time and date accurately before you use this
camcorder.
Please use SuperCar software under the condition that Electronic
Map are functioning normally.
The firmware function in the camcorder is for reference only,
drivers are advised to exercise discretion based on actual road
conditions.
The results of GPS positioning are only for reference, and should
not affect the actual driving situation. The camcorder also cannot
ensure the positioning accuracy.
GPS positioning accuracy may differ depending on weather and
location such as high buildings, tunnels, undergrounds, or forests.
GPS satellite signals cannot pass through solid materials (except

5
glass). Tinted window will also affect the performance of the GPS
satellite reception.
GPS reception performance on each camcorder may differ. The
camcorder cannot determine the accuracy of the positioning results
from different hardware.
The values displayed in this camcorder, such as speed and
position, may be inaccurate due to the influence of surrounding
environment. They are for your reference only.
This product is used only for non-commercial use, within the
maximum limits permitted by applicable law. We do not take any
responsibilities for the loss of use of the product.
This camcorder gets warm when in use; this is normal.
Improper use or operation of the product may result in damage of
the product or its accessories and void the warranty.
HP Inc. is NOT responsible for the loss of any data/content during
operation.
Before you start using the system, it is assumed that you
agree to the above statement.

6
1Introduction
Thank you for purchasing this advanced Car Camcorder. This product is
specifically designed for real time video recording when driving.
1.1 Features
Full HD 1920*1080
2.0" TFT-LCD color screen
150° Wide angle lens
Collision Detection, when a collision is detected, the camcorder will
automatically trigger the emergency recording
Parking Mode
Multifunction traffic safety reminder
1.2 Package Contents
The package contains the following items. In case there is any missing or
damaged item, contact your dealer immediately.
Car camcorder
Electrostatic
sticker
CD-ROM
Quick start guide
Car charger

7
1.3 Product Overview
No.
Item
No.
Item
1
LED Indicator
8
Speaker
2
LCD Color Screen
9
Wide Angle Lens
3
Menu / Back Button ( / )
10
Microphone
4
Add speed cam / Up Button ( /
)
11
Power Button
5
Snapshot / Down Button ( / )
12
Power Connector Port
6
Emergency Recording / Confirm
Button ( / )
13
Memory Card Slot
14
Bracket Knob
7
Voice Record on/off ( )
Note:
Please press the button (3~7) according to the diagram notice shown on screen.

8
2Getting Started
2.1 Storage Media
2.1.1 Insert the Memory Card
Insert memory card with the pins facing forward and the screen of the
camcorder facing forward too, see the picture as below:
2.1.2 Remove the Memory Card
If the camcorder is power on, please power off first and wait for the
procedure of switching off the camcorder completed before removing
the memory card.
Note:
1. Do not remove or insert the memory card when the camcorder is turned on. This may damage the
memory card.
2. Support SDHC class 10 and memory storage 8GB or above (support up to 32GB).
3. Please format the micro SD cards before the initial use. The formatted file type for this camcorder
is FAT32 file.
4. Periodically format the microSD card (recommended period: once a month).

9
2.2 Installing in Vehicles
2.2.1 Mount to Windshield
1. Put the electrostatic sticker onto the suggested area on the
windshield. Before putting the sticker, please wipe and clean the
windshield. During the installation, please make sure the bubbles
in between the sticker and the window are all gone.
2. Peel off the protective plastic sheet from the adhesive pad.
Table of contents
Other HP Dashcam manuals









































