HP D7171A - NetServer - LPr User manual

HP NetServer

Ultra Hot Swap Hard Disk Drive

and Tray

HP Part Number 5969-5925

Printed in February 2000

Notice

The information contained in this document is subject to change without notice.

Hewlett-Packard makes no warranty of any kind with regard to this

material, including, but not limited to, the implied warranties of

merchantability and fitness for a particular purpose. Hewlett-Packard shall

not be liable for errors contained herein or for incidental or consequential

damages in connection with the furnishing, performance, or use of this material.

Hewlett-Packard assumes no responsibility for the use or reliability of its software

on equipment that is not furnished by Hewlett-Packard.

This document contains proprietary information that is protected by copyright.

All rights are reserved. No part of this document may be photocopied,

reproduced, or translated to another language without the prior written consent

of Hewlett-Packard Company.

Novell NetWare®is a registered trademark of Novell, Inc.

Microsoft®Windows NT, NTAS®, and MS-DOS®are registered trademarks of

Microsoft Corporation.

SCO®UNIX®is a registered trademark of The Santa Cruz Operation, Inc.

Banyan®and VINES®are the registered trademarks of Banyan Systems

Incorporated.

OS/2®is the registered trademark of the International Business Machines

Corporation.

Hewlett-Packard Company

Network Server Division

Technical Communications/MS 45SLE

10955 Tantau Avenue

Cupertino, CA 95014-8059 USA

Audience Assumptions

The guide is for the person who installs, administers, and troubleshoots LAN

servers. Hewlett-Packard Company assumes you are qualified in the servicing of

computer equipment and trained in recognizing hazards in products with

hazardous energy levels.

iii

Contents

1 Installation Procedure................................................................................. 1

Installing the Hot Swap Hard Disk Drive in a Tray (optional).......................... 1

Unpacking and Shipping................................................................................ 2

Installing the Hot Swap Hard Disk Drive ........................................................ 3

Removing the Hot Swap Hard Disk Drive ...................................................... 4

2 Disk Drive Characteristics........................................................................... 7

NetWare and DOS ........................................................................................ 7

OS/2 and Windows NT.................................................................................. 8

UNIX and Banyan Vines................................................................................ 9

3 Application Alerts...................................................................................... 11

D4903A Cooling Requirements.................................................................... 11

D3604A/B Storage System/6 using Ultra SCSI Drives................................. 11

Hot Swap Drives Must be Parked Prior to Removal..................................... 11

A Warranty and Support............................................................................... 13

Hardware Warranty ..................................................................................... 13

HP Repair and Telephone Support .............................................................. 13

HP World Wide Web Site............................................................................ 13

B Regulatory Information............................................................................. 15

1 Installation Procedure

This guide describes how to attach an Ultra hot swap hard disk drive to a hot

swap tray and install the hard disk drive in your computer. Additionally, this

guide provides the cautions and instructions for removing and storing the hard

disk drive.

Installing the Hot Swap Hard Disk Drive in a Tray

(optional)

If you purchase a hot swap tray accessory (D3349B) separately from the hot swap

hard disk drive, follow these steps to attach the tray accessory:

1. Make sure that the hot swap hard disk drive meets the specifications

written on the hot swap tray label. If the hot swap drive is capable of

running Ultra2 at LVD (low voltage differential) signal levels, a jumper

must be installed on the drive to force the drive into SE (single-ended)

mode. Refer to the drive manual for the location of a “Force SE” jumper.

NOTE Not all Ultra2/LVD drives have this jumper. If the drive does

not have the Force SE jumper, that drive model will probably

not work with HP NetServer Ultra Hot Swap backplanes.

2. Attach the drive to the hot swap tray with the screws provided in the order

shown in Figure 1-1.

Chapter 1 Installation Procedure

Figure 1-1. Hot Swap Hard Disk Drive and Tray Installation

Unpacking and Shipping

Your system has a shipping plug to ensure that the hot swap hard disk drive is

not damaged while it is being transported. Save this plug. If you plan to transport

your system, reinstall your shipping plug as shown in Figure 1-2.

Chapter 1 Installation Procedure

Figure 1-2. Shipping Plug

Installing the Hot Swap Hard Disk Drive

CAUTION Use one of the six (6) vertical shelves in the system. Do not

attempt to install the hot swap hard disk drive in the

horizontal shelves.

Protect the hot swap hard disk drive from static electricity by

leaving it in its antistatic bag until you are ready to install it.

Before handling the hard disk drive, touch any unpainted

metal surface to discharge static electricity. When you remove

the hard disk drive from the antistatic bag, handle it only by

the frame.

Do not touch the electrical components. Place the hard disk

drive on the antistatic bag whenever you set it down.

1. If there is a filler panel in the disk shelf, remove that panel.

2. On the hot swap hard disk drive, press the locking tab down, and lift the

lever up as far as it can go. (See Figure 1-3.) Lifting the lever retracts the

locking pin at the top of the hard disk drive.

Chapter 1 Installation Procedure

3. Holding the hard disk drive as shown in Figure 1-3, slide the hot swap

hard disk drive slowly into the shelf until it stops.

4. Press the lever down as far as it will go.

Figure 1-3. Installing the Hot Swap Hard Disk Drive

Removing the Hot Swap Hard Disk Drive

1. To unlock the hot swap hard disk drive, push the tab down and then lift

the front lever.

2. Pull the hard disk drive out about an inch (2.5 cm) to break the power

connection.

3. Wait about 30 seconds for the hard disk drive to stop spinning and the

drive heads to park.

4. Use your hand to support the bottom of the hard disk drive, as shown in

Figure 1-4. Slowly pull the hard disk drive straight out. Do not allow the

hard disk drive to fall.

5. Turn the hard disk drive slowly to its horizontal storage orientation.

6. Place the hard disk drive in an electrostatic protected container. Do not

stack hot swap hard disk drives.

Chapter 1 Installation Procedure

Figure 1-4. Removing the Hot Swap Hard Disk Drive

Other manuals for D7171A - NetServer - LPr

117

This manual suits for next models

Table of contents

Other HP Computer Hardware manuals

HP MCS G2 Installation guide

HP D7171A - NetServer - LPr User manual

HP StoreOnce 2700 Operator's manual

HP OmniBook 3100 User manual

HP Xw4600 - Workstation - 2 GB RAM User manual

HP StorageWorks XP128 User manual

HP 6-Port SATA RAID User manual

HP Xw4600 - Workstation - 2 GB RAM User manual

HP Smart Array P400 User instructions

HP 64767 User manual

HP Integrity rx1600 User manual

HP 8168E User manual

HP A3550A - High Availability Disk Arrays Model 20 Storage... User manual

HP Integrity rx8620 User manual

HP Smart Array P400 User instructions

HP Sangoma 2 Installation instructions

HP HPE LSWM2XGT2PM User manual

HP t628 User manual

HP Smart Array 5300A User manual

HP Xw8400 - Workstation - 4 GB RAM User manual

HP 98625A User manual

HP E2416B User manual

HP Adaptec ultra p2280a User manual

HP KVM Server Console Switch G2 User instructions

Popular Computer Hardware manuals by other brands

EMC2

EMC2 VNX Series Hardware Information Guide

Panasonic

Panasonic DV0PM20105 Operation manual

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 user manual

Gigabyte

Gigabyte B660M DS3H AX DDR4 user manual

Raidon

Raidon iT2300 Quick installation guide

National Instruments

National Instruments PXI-8186 user manual

Hauppauge

Hauppauge WinTV-HVR-2250 Quick installation guide

Kontron

Kontron CP6002 user guide

Manhattan

Manhattan 702843 user manual

Aphex

Aphex 230 instruction manual

AMD

AMD Phenom II Product data sheet

Intel

Intel NUC 12 Pro user guide

dbx

dbx Zone Pro 1260 user manual

Galaxy

Galaxy GHDX2-2430S-24F4D Installation and hardware reference manual

Intel

Intel AXXRMFBU4 Quick installation user's guide

Kontron

Kontron DIMM-PC/MD product manual

ST X-NUCLEO-SAFEA1B How to use

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 installation manual