Hover-1 Beast Buggy User manual

BEAST

BUGGY

HOVERBOARD ATTACHMENT

OPERATION MANUAL

HY-BST-BGY

HELMETS SAVE LIVES!

Always wear a properly tted helmet that complies with CPSC or CE safety standards

when you ride.

WARNING

Correct Fit:

Make sure your helmet

covers your forehead.

Incorrect Fit:

Forehead is exposed and

vulnerable to serious injury.

This manual provides you the information you need for the safe operation and maintenance of your Hover-1

Beast Buggy. Please read it thoroughly before riding your Hover-1 Beast Buggy.

INTRODUCTION

WARNING

Make sure you read this complete manual before riding

your Hover-1 Beast Buggy. Even if you are an

experienced rider, it is important that you read this

manual to ensure your safety. Failure to read the manual

or follow its guidelines could lead to serious injury or

death.

Please visit

www.hover-1.com/troubleshoot

to request replacements for

missing or defective parts

HOVER-1 BEAST BUGGY DIAGRAM

SPECIFICATIONS

1. Seat

2. Handle Bars

3. Shock Absorbing Coils

4. Pedal Mounts

5. Elastic Strap

6. Seat Frame

7. Locker

8. Frame Extension

9. Foot Rests

10. Front Wheel

Compatibility: Most hoverboards with 10” wheels

Max Supported Weight: Refer to your hoverboard’s manual

Wheel Size: 8” swivel caster

Seat Material: Polypropylene

PARTS LIST

(1) Seat

(1) Seat Frame

(1) Frame Extension

(1) Right Handlebar

(1) Wheel

(1) Left Handlebar

(2) Hook and Loop Straps (2) Spare Hook and

Loop Straps

(1) Wrench

Hex Keys:

(1) M8

(1) M6

(2) Lockers

(2) M8 X 38 Screws

(4) M8 X 40 Screws

(4) M6 X16 Screws

(4) 6 mm Nuts

(6) 8 mm Nuts

(4) 20 mm Washers

ASSEMBLING YOUR HOVER-1 BEAST BUGGY

1. Remove all of the Hover-1 Beast Buggy contents from the box. Ensure all the contents from the “PARTS LIST”

section are accounted for.

2. Insert the left and right handlebar mounts into the seat frame as shown below. Align the holes of the handlebar

mounts with the holes in the seat frame. Insert the M8 X 38 screws into the seat frame holes and attach the 8 mm

nuts to the end of the screws by twisting them on clockwise. Once the nuts are attached, hold the 8 mm nuts in

place with the wrench and turn the screws clockwise with the smaller hex key to tighten the screws. Make sure

both screws are tightly secured.

3. Insert the frame extension into the seat frame. The foot rests should be pointing down. Adjust the front frame to

your preferred length. Remove the black cap and the rst white washer from the end of each locker. Fully insert

the screwed section of one locker into the seat frame holes. Add the white washer and black cap back onto the

locker once it is fully inserted and twist the cap on clockwise until its is tightly secured. Close the locker clamp

tightly. Repeat these steps on the other side of the seat frame with the other locker.

4. Align the holes of the seat with the holes of the

seat frame as show below. Insert the M6 X16 screws.

Attach the 20 mm washers and the 6 mm nuts to

the bottom of each screw, under the seat frame.

Twist the nuts on clockwise. Hold the 6 mm nuts still

with the wrench while turning the screws clockwise

with the larger hex key to tighten the screws. Make

sure all 4 screws are tightly secured.

5. Align the holes of the wheel plate with the

holes in the frame extension. Insert the M8 X 40

screws into each hole and attach the 6 mm lug

nuts to each screw. Hold the 6 mm nuts still with

the wrench while turning the screws clockwise

with the larger hex key to tighten the screws.

Make sure all 4 screws are tightly secured.

6. Your Hover-1 Beast Buggy is now assembled and should look like the below image.

Your Hover-1 Beast Buggy should be completely assembled prior to attaching it to your hoverboard. Please

refer to the “ASSEMBLING YOUR HOVER-1 BEAST BUGGY” section for assembling procedures.

1. Place the handlebar mounts onto the foot pads of your hoverboard. Ensure the mounts are centered on

the foot pads of your hoverboard as much as possible.

ATTACHING YOUR BEAST BUGGY TO YOUR HOVERBOARD

Other manuals for Beast Buggy

This manual suits for next models

Table of contents

Other Hover-1 Hoverboard manuals

Hover-1

Hover-1 ALL-STAR 2.0 User manual

Hover-1

Hover-1 REBEL User manual

Hover-1

Hover-1 TITAN User manual

Hover-1

Hover-1 i-100 User manual

Hover-1

Hover-1 RIVAL Operation instructions

Hover-1

Hover-1 FORMULA User manual

Hover-1

Hover-1 i-100 User manual

Hover-1

Hover-1 RANGER PRO User manual

Hover-1

Hover-1 RAPTOR User manual

Hover-1

Hover-1 MY FIRST HOVERBOARD User manual

Hover-1

Hover-1 SUPERSTAR EU-H1-SPR-CMB Operation instructions

Hover-1

Hover-1 FALCON-1 User manual

Hover-1

Hover-1 SYPHER User manual

Hover-1

Hover-1 DREAM User manual

Hover-1

Hover-1 DRIVE User manual

Hover-1

Hover-1 HELIX User manual

Hover-1

Hover-1 KART User manual

Popular Hoverboard manuals by other brands

Gyroor

Gyroor G2 user manual

PNI

PNI Escort T1B user manual

Sisigad

Sisigad A26 user manual

SHENZHEN UNI-CHIC TECHNOLOGY

SHENZHEN UNI-CHIC TECHNOLOGY VR46 FUN user manual

Manta

Manta MSB9012 user manual

IHoverboard

IHoverboard H4 manual

Jetson

Jetson JZONE-BLK manual

LEXGO

LEXGO Spark user manual

Razor

Razor Jetts Mini manual

Sisigad

Sisigad A06 user manual

Gotrax

Gotrax HOVERFLY XL user manual

InMotion

InMotion SCV H2 Star Light user manual

Halo Board

Halo Board Halo Go user manual

Airboard PRO

Airboard PRO INFINITY WHEEL T581 instruction manual

HX SURF user manual

Gotrax

Gotrax EDGE user manual

Denver

Denver HBO-6620Black Original instruction

Powerboard

Powerboard UL 2272 series user manual