Hott E802S User manual
User Guide
E802S
Headsets
Charging Box
Ear Rubber
USB cable User Guide
True wireless stereo
E802S
User Guide
E802S Overview
Multi-function area
MIC
LED Indicator
Micro USB charging interface
The device will power on automatically while taken out from the box.
The device will power off and into charging while putting put back
to the box.
Power On/Off
Phone Pairing Instruction
1.Take the headsets out from the box, headsets turn on and connect each
other automatically with a beep “TWS connected”. Then the right earbud
speaks ”pairing” with green light flashing, headsets get into pairing mode.
E802S
Left & Right Headset Pairing guide:
1.Take the headsets out from charging box, both headsets will power on
automatically with a beep “Power on”.
2.Press the function area 3 seconds for both headsets,the headsets
paired successfully after both headsets reminding “TWS Connected”
3.If not hear the tone “TWS connected”, please repeat Step 1 and Step 2.
4.TWS reconnected:The headsets will be connected automatically with
the tone “TWS connected” while phone turns on after pairing once.
※If one side no sounds while connecting,put the headsets back to the
charging box and take out again,headsets will connect to the phone
automatically after connecting with each other.
Notice:Pairing mode will be exited in 3 minutes if not connected
the phone.Put the headsets back to the charging box can re-enter
pairing mode.
2. Turn on the Bluetooth device on your phone, select: E802S, pair and
connect. You can hear the tone “Connected” while connected successful-
ly.
Notice:
Only the right headset will connect with the
phone, the left one will connect with the
right one.
45°
Instructions of Headsets can not reconnected or one side
with no sounds.
Right Wearing:
Put the earphone into ear canal, turn the earphone lightly to touch
with your ear canal cozily and avoid falling down. Wrong wearing
will affect the audio performance or MIC communication.
Music
Either headset can be used to control when using music player
Music control touch button
(Pause/Play/Previous&Next)
Notice: Select the earbuds which can completely seal your ear
canal to reach the best sound ,your left and right ears may require
different sizes of earbuds.
1.Put the headsets back to charging box and delete the “E802S” from
cellphone.
2.Refer to the “Left & Right Repairing guide” to re-pair the TWS.
3.Refer to the “Left & Right Repairing guide” to connect with the phone.
Wearing
Try to change the ear rubber to match your ear.
Better tightness, better performance.
Wrong Wearing:
※Awaken assistant: touch 3 times on right headset multi-function area.
※Touch once to pause music, or play music, same function if do on
the left headset.
※Touch twice on the left headset button area to play next song.
※Touch twice on the right headset button area to play previous song.
※Long press on right headset button area to volume up.
※Long press on left headset button area to volume down.
Calling:
Only valid to control the right headset when calling.
Power level
You will hear a beep “Battery low” every 30 seconds When the power
can only last for 2 minutes.
Notice: Any attempt to remove or replace the battery will damage
the product and void the product warranty.
The Charging indicator is on when charging for the charging box
Answer the call: short touch the multi-function button (Valid for both
headsets)
Reject the call: long touch the multi-function button for 3 seconds and
hear the tone “Du Du…” (Valid for both headsets)
End Call: short touch the multi-function button when calling, and hear
the tone “Du Du…” (Valid for both headsets)
Charging for the headsets:
Put the headsets into the charging box, and fully closed. The green led
will be on when charging, and will be off if charging finished.
Charging for the box:
Connect the adaptor and box with USB cable to charge for both headsets
and box, the led indicator will be on when charging.
Calling control touch button
(Right headset):
(Answer/Reject etc.)
Charging display
Headset indicator
Charging Green led on
Led off
Blue led on
Display
Green led flashing
Charging finished
Charging
Charging finished
Pairing
Charging box indicator
Safety Warning
To protect hearing, please using suitable volume. Avoid listening to
music at high volume for a long time, which may cause permanent
damage to your hearing or deafness.
Do not use this product when driving, riding, crossing the road etc.
Attention: Audio and video may be slightly out of sync if you use
headphones while watching a video.
After charging is completed, please pull out the charging cable
from the device to avoid long-term charging of the product.
Charger output voltage and current should be less than 5V/1A
or 5V/1.5A.If the voltage and current of the charger exceed the
specified value, this will cause serious damage to the product,
the product warranty will be invalid as well .
Headsets parameter:
Size: L 23.6mm W 16.3mm, H 23.7mm (Headset)
Weight: 4.5g/pcs
Charging current rated: 55mA
Charging time: 1 hour
Voltage rated: 3.3V-4.2V
Standby time: about 40 hours
Play music continuously: 2~2.5 hours
Call time: 2~2.5 hours
Support profile: HSP, HFP, A2DP, AVRCP
RF Transmit power: Class 2
Transmission range(Hz):2.40GHz~2.48GHz
Communication distance: 10m
Audio sampling accuracy: 16bits
Audio sampling rate: 44.1~48kHz
Audio coding format: CVSD, nSBC, SBC, AAC
SNR: >95dB
Working temperature: -15℃~+60℃
Working humidity: 10%~85% (Non-freeze status)
Speaker parameter
Speaker: φ 6mm， Impedance: 16Ω/typ.
Frequency (Hz): 20Hz~20KHz Sensitivity: 93±3dB
Input wattage: 2mW/typ., 5mW/max.
MIC parameter
MIC type: Silicon
Sensitivity: -42±3dB SPL: 130dB
Charging box parameter
Size: 79*32*32 mm Weight: 54g
I/O: Micro USB
Power bank: 2 full charging for headsets if power bank is full
Charging time: about 2 hours
E802S
E802S
E802S
区
1.从充电盒中取出两个耳机，双耳自动开机互连，并伴有提示音“TWS
connected”,右耳耳机主动发出“pairing ”提示音，并伴有绿灯闪烁，
耳机进入配对模式。 ※若出现主副耳连接后一边无音现象，左右耳机放回到充电仓后再重新拿起，
双耳连接后会自动回连手机。
注意：
只有右耳机会连接您的手机。左耳机会
连接右耳机。
2.在手机上打开蓝牙功能菜单，选择：E802S,配对及连接。当完成配对时，您
会听到“Connected”。
注意：您有3分钟连接耳机和您的手机，否则耳机将退出配对模式。将耳机
放回充电盒即能重新进入配对模式。
1将耳机从充电底座拿起，双耳自动开机，伴有提示音“Power on”；
2.分别长按左右耳功能区3秒，待双耳分别伴有“TWS Connected” ，此时
双耳机配对成功；
3.若您没有听到“TWS Connected"提示，请重复以上动作。
4.TWS 对耳回连：对耳只需配对一次，之后开机会自动发起回连，并分别伴
有“TWS connected”提示音。
E802S
触摸
错误的佩戴方式：
提示：可能有多个耳塞适合您。要得到最佳音效，请选择能完全密封您耳
道的耳塞。您的左右耳可能需要不同尺寸的耳塞。
正确的佩戴方式：
将带耳塞的耳机置入耳道。轻轻转动直至舒适贴合，同时不掉落。错误的佩
戴方式会影响到耳机的信号，麦克风的通话。
45°
对耳机无法自动回连，出现单耳无声情况
1.左右耳放回充电盒在耳机蓝牙列表找到并删除“E802S”
2.参照“左右耳配对指南”，将左右耳重新配对
3.参照“耳机配对指南”，将手机和双耳机重新配对连接
触摸
左触摸
右触摸
（左右耳操作有效）
唤醒语音助手：右边耳机（主耳）点触三次。
长触摸右耳机音量加。
长触摸左耳机音量减。
右
30
触摸
来电接听，短点触耳机上多功能键（主副耳操作有效）
拒接来电，长触多功能键3秒、并伴有“du du”（主副耳操作有效）
结束通话：通话中，短点触多功能键, 并伴有“du du”,（主副耳操作有效）
充电显示
绿灯常亮
绿灯快闪
蓝灯亮
Table of contents
Languages:
