Hoover Concept one User manual

Fillin and retain!

1111"I"I" I " . I

,TheHOOVER vacuum cleaner you have just purchased is a combina-

tuO_cleaner. It Is used for carpet and rug cleannng and may be used

with attachments for above the floor cleaning.

The model and serial number appear toward the rear of the bottom of

the cleaner.

For your personal records, please enter these numbers in the spaces

provided below and retain in a safe place.

Your cleaner is model

and has serial number

Save!

Index

Assembling Cleaner. •........................... 5

Cleaner Description ........................... 3,4

How to Use

Cleaning Tools ............................. 8-11

Special Features .............................. 7

Upright Cleaner ............................. 6-7

If You Havea Problem .......................... 21

Important Safeguards ........................... 2

Lubrication ................................. ..2 1

Maintenance

Authorized Hoover Service ................. 12,21

Dirt Duct and Dirt Tube .................... 18,19

Replacing Belts ........................... 15-17

Replacing Brushes ........................... 20

Replacing Headlight ......................... 14

Replacing ThrowAway Bag ................ 12,13

Important Safeguards!

•Read all instructions.

*Warning: Electric shock could occur if used outdoors or on wet

surfaces.

• Close supervision is necessary when any appliance is used by or

near children. Do not allow vacuum cleaner to be used as a toy or to

run unattended at any time.

•Keep hands, feet, loose clothing, and hair away from rotating agita-

tor. Do not operate cleaner in bare feet or when wearing open toe

shoes or sandals.

•Don't run cleaner over cord. It may damage insulation.

•Do not use cleaner to pick up matches, or live ashes and cigarette

butts.

•Never vacuum in the presence of flammable or combustible liquids

or fumes.

•Avoid picking up hard, sharp objects with the cleaner. They may

damage the cleaner and the bag.

•Do not allow cleaner to run in a stationary position on non-carpeted

floors; damage could occur to these surfaces.

•Unplug cleaner when not in use. Turn machine off at switch before

unplugging.

•Always disconnect cord from electrical outlet before servicing the

cleaner.

•Change bag frequently when picking up very fine materials such as

powder.

•Grasp the plug to disconnect from wall outlet to avoid damage to

cord, plug, prongs, or receptacle.

•If cleaner has a cord reel, hold on to the plug while cord is being re-

wound to prevent cord from whipping.

•The use of an extension cord is not recommended.

•If cleaner is in disrepair, do not attempt to operate.

•Have repairs made by the qualified personnel at Hoover Factory

Service Centers or Authorized Hoover Warranty Service Dealers.

•Use vacuum cleaner only for its intended use as described in the

instructions. Use only attachments recommended by the appliance

manufacturer; others may cause hazards.

Save these instructions!

Quahty

Products

thru

Employee

Pa rt_c0p,_t_on

Unpacking

section

Cleaner base

and bag

assembly

Unpack the cleaner from the car-

ton and remove and dispose of

cardboard packing.

Cord reel model

Make a small loop with cord and

place it over the hook at the back

of the handle. When operating,

cord should be positioned as

shown.

Before operating your cleaner,

identify features and controls

shown in the diagram, then,

read the section on "How to use."

1. Edge Cleaning: Brushed edge cleaning is provided on the right side

of the cleaner. Standard edge cleaning is provided on the left side.

2, Handle Release Pedals; step on either pedal to lower handle to either

operating or low position. (Some models have only one pedal.)

3. Cord Reel: to unwind cord, pull from cord reel to desired length,

(Available with some models.)

4. Cord Return Button: depress to automatically rewind cord for

storage. Hold plug until cord is rewound. (Available with some

models.)

5. Vinyl Bag Jacket: covering for throw away bag.

6. Bag Spring: place spring ring over hook to support the bag.

7. ON-OFF Switch: some models have two speeds.

8. Handle Grip

9. Twin Headlight (Available with some models.)

10. Carpet Height Adjustment Lever: choose "'LOW/MED", "PLUSH",

or "SHAG".

11. Molded Furniture Guard

Note: If using cleaner on new carpet, be sure to change bag frequently.

See "Maintenance" section for bag replacement.

Operate cleaner only at voltage specified on data plate on bottom of

cleaner.

Cord

storage

hooks

Cord wrap model

Wrap cord around hooks for stor-

age.

On some models the top hook can

be rotated forward or backward

for easy cord release. The hook

can then be repositioned for

wrapping the cord.

How to assemble

Remove the tape holding the two

handle attachment screws from

the lower end of the handle. Set

screws aside.

Align handle with ON-OFF switch

to the rear of the cleaner and label

to the front. Fold cord beside cord

tube as shown. Push cord and

tube completely up into handle.

CORD

Insert handle into the cleaner to

the line indicated on label. Inser-

tion to the line is necessary for

proper screw alignment.

Lower handle to operating posi-

tion and place spring bag ring over

hook located on handle.

Remove paper bag from inside the

vinyl jacket. Then remove dirt tube

by pushing to either side to release

retention clips. Lift tube up and

out.

Insert the two screws into the

holes provided inside the front

housing.

Tighten with screwdriver. Snap

dirt duct back into place. Replace

paper bag. (Follow instructions

on bag.)

Zip vinyl jacket. Cleaner is ready

to use.

UPRIGI,tr

OFF

LOW

HIGH

How to use

To transport

To move your cleaner from room

to room, put the handle in the ,p-

right position, tilt the cleaner back

on the large rear wheels and push

forward.

Handle adjustment

The handle of your cleaner has

three positions: Upright for stor-

age and when using attachments.

Operating for general operation on

carpet and foors. Low for reaching

under low furniture. The handle

can be lowered by stepping on the

pedal on either side at the rear of

the cleaner. (Some models have

only one pedal. )

ON-OFF switch

To turn cleaner ON, push switch

down. To turn cleaner OFF, push

switch up.

Some cleaners are equipped with

a two-speed switch. When the

switch is pushed up as far as pos-

sible, it is in the OFF position.

LOW SPEED is to be used for less

vigorous cleaning and reduced

suction on delicate carpet, rugs,

and non-carpeted floors. Slide

the switch down one notch from

OFF to LOW speed.

HIGH SPEED is to be used for

cleaning most carpet and for use

with attachments. When the

switch is pushed down as far as

possible it is in HIGH speed.

Note: When cleaning any floor

covering, turn cleaner "OFF"

when unattended, particularly on

non-carpeted floors. The agitator

cleans so thoroughly that opera-

tion while the cleaner is stationary

may mar the floor covering.

Special features

Edge cleaning

Brushed edge cleaning is provided

on the right side of the cleaner to

remove imbedded dirt in carpet

near baseboards and furniture.

Guide the right side of the cleaner

parallel to the edge of carpet or

furniture for brushed edge clean-

ing.

Standard edge cleaning is provid-

ed on the left side of the cleaner.

Standard edge cleaning removes

surface dust and litter.

Adjustment for carpet

pile height

The cleaning of carpet and rugs

takes place at the nozzle. This is

the opening at the bottom of the

cleaner where the agitator is lo-

cated.

It is necessary for the nozzle to be

adjusted properly to the various

carpet pile heights. The adjust-

ment lever on the front of the

cleaner may be set on three differ-

ent self-adjusting ranges.

On very dense pile plush or shag

carpet, some difficulty in pushing

the cleaner may occur. In this

case, position the adjustment le-

ver on PLUSH or SHAG.

When cleaning non-carpeted

floors, set adjustment lever to

LOW/MEDIUM and use LOW

SPEED, if available on your

cleaner. Because of the vigorous

action of the agitator, do not

allow cleaner to run in a sta-

tionary position on any floor

covering, as marring may occur.

Disconnect cleaner from electri-

cal outlet before making nozzle

adjustment.

To change nozzle adjustment

grasp the handle and tilt the

cleaner forward. Move the lever

with your hand until it "clicks" in-

to the desired position.

Cleaning Tools

This cleaner may be used with cleaning tool attachments. Some models

have a cleaning tool set included. If not, the Deluxe or Standard cleaning

tool set may be purchased at additional cost from Hoover Dealers. The

cleaning tools allow you to do above the floor cleaning and to clean hard

to reach areas.

Deluxe cleaning tool set

U3901 includes vinyl hose, con-

vertor, wands, dusting brush, fur-

niture nozzle, wall/floor brush

and crevice tool.

Standard cleaning tool set

U3903 includes lightweight hose,

converter, wand, multi-purpose

brush and crevice tool.

How to assemble hose

and converter

By using this converter attach-

ment, suction is channeled from

the cleaner to the hose and clean-

ing tools.

HOLES

HOSE

CONNECTOR CONVERTER

The converter must first be as-

sembled to the hose by inserting

the converter into the hose con-

nector.

Push connector and converter to-

gether and twist until the projec-

tions on the converter fit into the

holes on the hose connector. This

unit should remain assembled for

all future tool use.

Using cleaning tools

A. Attach converter

Disconnect cleaner from elec-

trical outlet. Cleaner must not be

plugged in when positioning or

removing converter.

With cleaner in upright position,

grasp handle and lean cleaner

backwards until bag is flat on the

floor and underside is accessible.

Turn lock on converter so that the

serrated portion is in line with the

hose.

Place projections on converter

onto rim on bottom plate of

cleaner.

Pivot converter until it covers the

opening. Place edge of lock in slot on

cleaner and turn lock to secure

converter.

Raise cleaner to upright position.

Other manuals for Concept one

This manual suits for next models

Other Hoover Vacuum Cleaner manuals

Hoover

Hoover FloorMate SpinScrub FH40000 User manual

Hoover

Hoover Sensory Ecobox System User manual

Hoover

Hoover 094HF122GH User manual

Hoover

Hoover Vap&Dry User manual

Hoover

Hoover WindTunnel Wind Tunnel Bagless Canister... User manual

Hoover

Hoover SH40055 User manual

Hoover

Hoover DF71DV08011 User manual

Hoover

Hoover FREEJET 3in1 FJ120R2 User manual

Hoover

Hoover UH71250 User manual

Hoover

Hoover WindTunnel U6434-900 User manual

Hoover

Hoover Corded & Cordless Rechargeable User manual

Hoover

Hoover Platinum Power Max CWKTH012 User manual

Hoover

Hoover SMARTWASH+ User manual

Hoover

Hoover POWERDRIVE User manual

Hoover

Hoover HGO320H 011 User manual

Hoover

Hoover Platinum Collection User manual

Hoover

Hoover SteamVac LS User manual

Hoover

Hoover Spirit S3617 User manual

Hoover

Hoover Acenta User manual

Hoover

Hoover WindTunnel S3765040 User manual

Hoover

Hoover FloorMATE Hard Floor Cleaner User manual

Hoover

Hoover UH70010 User manual

Hoover

Hoover U5473 User manual

Hoover

Hoover FREESPACE EVO User manual

Popular Vacuum Cleaner manuals by other brands

Bissell

Bissell LittleGreen Proheat 1425 Series user guide

Panasonic

Panasonic MC-YL637S147-AE Service manual

NEFF

NEFF N17XH10 0 Series instruction manual

LG A9 Series owner's manual

Oreck

Oreck Cordless Captura BK51700 Series user guide

Kogan

Kogan KAVACROBVWA user manual

Kränzle

Kränzle VENTOS 50 ID Use and maintenance

EVVO

EVVO Ai35 instruction manual

DeWalt

DeWalt DWH200D instruction manual

Pontec

Pontec Pondomatic Vacuum Cleaner operating instructions

Cleanmaxx

Cleanmaxx PC-P007E instruction manual

Exido

Exido 240-114 manual

RIDGID

RIDGID WD1685AU0 owner's manual

Ezviz

Ezviz RE4P manual

STG global

STG global TANVAC HDV3000 Operator's manual

Shark

Shark ROTATOR PRO COMPLETE NV550 Series manual

Factory

Factory M3340 operating manual

Shop-Vac

Shop-Vac VN92 SERIES user manual