Honeywell W1KS User manual
Lyric™ W1 Wi-Fi Water Leak
and Freeze Detector
INSTALLATION INSTRUCTIONS
Before you begin
Read these instructions carefully. Failure to follow these instructions can
damage the product.
Download the Lyric app
To setup and use your new water
leak and freeze detector, search for
Honeywell Lyric in the App Store or
Google Play.
GET IT ON
Lyric
For help, go to getconnected.honeywell.com ii
Need help?
If you need help any point during the installation and setup of
the W1 Wi-Fi Water Leak and Freeze Detector, please contact
Customer Care:
Web: getconnected.honeywell.com
iii For help, go to getconnected.honeywell.com
Contents
Welcome • 1
Parts of your detector • 2
Placement • 3
Preparing for installation • 4
Download and install the app • 4
Power up the detector • 5
Pair and name your detector • 6
Connect to Wi-Fi • 7
Placement • 8
Optional cable sensor • 8
Configure the detector • 10
Select alert recipients • 11
App dashboard • 12
Temperature/Humidity trend • 12
Leak detected • 13
Using the Lyric app • 15
Rename a detector • 15
Remove a detector • 16
For help, go to getconnected.honeywell.com iv
Change alert settings • 17
Add alert recipients • 18
Remove alert recipients • 19
Reset • 20
Status LED • 20
Maintenance • 21
Frequently Asked Questions • 22
Regulations • 25
Guarantee • 25
Specifications • 26
1 For help, go to getconnected.honeywell.com
Welcome
Congratulations on your purchase of Honeywell’s Lyric™ Wi-Fi
Water Leak and Freeze Detector. This sensor keeps an eye on your
home or business, alerting you at the first sign of water leaks or
large changes in temperature or humidity, which can help stop a
leak before it becomes a flood, or alert you to conditions that can
result in frozen pipes.
What’s in the box?
You should find:
• Honeywell Lyric™ W1 Wi-Fi Water Leak and Freeze Detector
• Three AA alkaline batteries
• Optional cable sensor
• Optional mounting screw
Download the app
To setup and use your new
detector, search for Honeywell Lyric
in the App Store or Google Play.
After downloading, follow the
instructions in the app and skip the install step.
GET IT ON
Lyric
For help, go to getconnected.honeywell.com 2
Parts of your detector
LED indicator
Cable sensor
Mounting keyhole (to hang on wall)
Water sensors
Cable sensor jack
Sensor jack plug
3 For help, go to getconnected.honeywell.com
Placement
The detector and (if used) the optional cable sensor should be placed where leaks
are likely to occur. For the most part, this will be on the bottom level of your home or
business, near water sources, or anywhere you think leaks are possible.
Locations to consider:
• Floor drain
• Water heater
• Sump pump
• Washing machine
• Kitchen
• Sink
• Toilet
For help, go to getconnected.honeywell.com 4
Preparing for installation
To install this product, you will need:
• The Lyric app
• Bluetooth connectivity turned on for your Android or Apple mobile
device
• Your Wi-Fi® password
Download and install the app
1 Go to the App Store or Google Play and search
for Honeywell Lyric. Follow instructions to
download and install the free Lyric app.
2 After downloading, launch the app, register (if
necessary), go to Menu, and then go to Add New
Device.
Note: Make sure Bluetooth is enabled on your
mobile device.
Honeywell Lyric app
Download and login
to complete the setup.
5 For help, go to getconnected.honeywell.com
Power up the detector
It is important to install the app before you
install the batteries.
After the batteries are installed, the
detector will begin attempting to pair with
the app immediately.
If you are installing multiple detectors,
the easiest way to do it is to install the
batteries in one leak detector at a time.
If you have more than one leak detector
attempting to pair with the app, you will
see multiple MAC IDs listed in the app.
Remove the battery cover and the batteries
to see the detector’s MAC ID label.
The detector is powered by 3 AA batteries (included). Open the battery cover on the
detector and install the batteries.
1 Remove the battery cover from the detector.
2 Install the 3 AA alkaline batteries (included).
3 Replace the battery cover. Press firmly around the edges to ensure a snug fit.
Note: The cable sensor jack is NOT for plugging in a power adaptor. Plugging in a
power adaptor could damage the detector.
For help, go to getconnected.honeywell.com 6
Pair and name your detector
1 Under Add New Device, select Lyric
Water Leak and Freeze Detector.
Note: Make sure Bluetooth is enabled on
your mobile device.
2 Provide a location for your detector.
Press NEXT.
3 The detector will now pair with the app.
Note: If you have more than one detector,
you will need to connect each detector
individually.
4 An audible alert will sound and your
detector’s LED will turn solid blue to
indicate your detector is paired. Press
NEXT.
5 Create a custom name for the detector or
select one from the list. Press NEXT.
This manual suits for next models
1
Table of contents
Other Honeywell Security Sensor manuals
Honeywell
Honeywell ADEMCO 5808EU User manual
Honeywell
Honeywell C7061A1020 User manual
Honeywell
Honeywell FF-SB12 Series User manual
Honeywell
Honeywell BW Ultra User manual
Honeywell
Honeywell PEHA LightSpot Mid Range Series Installation and operation manual
Honeywell
Honeywell Lyric YCHW4000W4004 Installation guide
Honeywell
Honeywell DUAL TEC DT8050A User manual
Honeywell
Honeywell FlexGuard 5853 User manual
Honeywell
Honeywell FlexGuard FG-1625F User manual
Honeywell
Honeywell C7076A User manual
Honeywell
Honeywell FS24X User manual
Honeywell
Honeywell X-ND100 User manual
Honeywell
Honeywell Eclipse Instruction Manual
Honeywell
Honeywell Activ8 BG User manual
Honeywell
Honeywell Miller 8172 Operator's manual
Honeywell
Honeywell PEHA MLS Digital Hi-Bay D MLS2001AHBF Installation and operation manual
Honeywell
Honeywell FIRE-LITE ALARMS W-SD355 User manual
Honeywell
Honeywell EXCEL ADT-HRSI User manual
Honeywell
Honeywell DT8035 DUAL TEC User manual
Honeywell
Honeywell IS2535T User manual
