Honeywell 50198 User manual
LISTED
FOR WET
LOCATION
BELMAR 52” CEILING FAN
MODELS #50198, 50199
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-877-361-3883, Monday - Thursday, 8 am - 6 pm, EST and Friday,
8 am - 5 pm, EST.
Español p. 19
2
WELCOME
PREPARATION
Before beginning the assembly of this product, ensure
that all parts are present. Compare all parts with the
package contents list and hardware contents list. If
any part is missing or damaged, do not attempt to
assemble the product.
After opening the top of the carton, remove the
mounting hardware package from the foam inserts,
then remove the motor from the packaging and
place it on a soft surface, such as a carpet, to avoid
damage to the nish.
Estimated Assembly Time: Under 60 minutes
Tools Required for Assembly (not included): Electrical
Tape, Phillips Screwdriver, Pliers, Safety Glasses,
Step Ladder, and Wire Strippers
Helpful Tools (not included): AC Tester Light, Tape
Measure, Wiring Handbook, and Wire Cutters
CARE AND MAINTENANCE
At least twice each year, lower the canopy to check
the downrod assembly, and then tighten all screws
on the fan. Clean the motor housing with only a soft
brush or lint-free cloth to avoid scratching the nish.
Clean the blades with a lint-free cloth. You may
occasionally apply a light coat of furniture polish to
wood blades for added protection.
Important: Shut off the main power supply before you
begin any maintenance tasks. Do not use water or a
damp cloth to clean the ceiling fan.
FAN WEIGHT
The net weight of this fan is: 14.52 lbs. (6,59 kg).
TABLE OF CONTENTS
ATTACH YOUR RECEIPT HERE
Serial Number
Purchase Date
Care and Maintenance ........................2
Package Contents ...........................3
Safety Information ...........................4
Mounting Options ............................5
Mounting Bracket Installation ...................6
Standard or Angle Mounting Instructions . . . . . . . . . .7
Closemount Instructions......................10
Wiring ....................................11
Canopy Installation..........................12
Blade Installation ...........................13
Final Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Operating Installation . . . . . . . . . . . . . . . . . . . . . . . .15
Replacement Parts List ......................16
Troubleshooting ............................17
Limited Lifetime Warranty.....................18
3
PACKAGE CONTENTS
1
2
6
3
4
5
Unpack your fan and check the contents. You should
have the following items:
1. Blade (5)
2. Canopy
3. Mounting Bracket
4. Canopy Cover
5. Downrod
6. Motor Housing
7. Switch Housing
8. Yoke Cover
9. Blade Arm (5)
10. Loose parts bags containing (not shown):
Mounting hardware, blade attachment hardware,
electrical hardware, pull chains, wire connectors, etc. 7
8
9
WARNING
CAUTION
CAUTION
To reduce the risk of re, electric shock, or
personal injury, do not bend the blade arms
when installing them, balancing the blades, or
cleaning the fan. Do not insert objects between
the rotating fan blades.
Read all instructions and safety information
before installing your new fan. Review the
accompanying assembly diagrams.
Carefully check all screws, bolts, and nuts on the
motor housing to ensure that they are secured.
!
!
!
!
!!
DANGER
If using the fan in a damp location, the fan must
be connected to a supply circuit that is protected
by a Ground Fault Circuit Interrupter (GFCI) to
reduce the risk of personal injury, electrical shock
or death.
! !
4
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate, or install the product.
• Before you begin installing the fan, disconnect the power by removing fuses or turning off the
circuit breakers.
• Make sure that all electrical connections comply with local codes, ordinances, the National Electrical
Code, and ANSI/NFPA 70-199. Hire a qualied electrician or consult a do-it-yourself wiring handbook if
you are unfamiliar with installing electrical wiring.
• Make sure the installation site you choose allows a minimum clearance of 7 ft. (2,14 m) from the blades
to the oor and at least 30 in. (76 cm) from the end of the blades to any obstruction.
DANGER
WARNING
WARNING
When using an existing outlet box, make sure
the outlet box is securely attached to the building
structure and can support the full weight of
the fan. Failure to do this can result in serious
injury or death. The stability of the outlet box is
essential in minimizing wobble and noise in the
fan after installation is complete.
To reduce the risk of re or electric shock, do not
use the fan with any solid-state speed-control
device or control the fan speed with a full-range
dimmer switch.
To reduce the risk of re, electric shock, or
personal injury, mount the fan to an outlet box
marked “ACCEPTABLE FOR FAN SUPPORT”
and use the mounting screws provided with the
outlet box. Most outlet boxes commonly used for
the support of lighting xtures are not acceptable
for fan support and may need to be replaced.
Consult a qualied electrician if in doubt. Secure
the outlet box directly to the building structure.
The outlet box and its support must be able to
support the moving weight of the fan, at least 35
lbs. (15,88 kg).
!
!
!
!
! !
Fig. 1
Fig. 2
Fig. 3
5
MOUNTING OPTIONS
DANGER
1. Your fan has 3 mounting options:
• Standard (Fig. 1)
• Angled (Fig. 2)
• Closemount (Fig. 3)
Note: The fans in gures 1 through 3 are not the actual
fan in your package, they are representation of the 3
different mounting options.
Important: If using the angle mount, check to ensure
the ceiling angle is not steeper than 16°.
Helpful Hint: Downrod style mounting is best suited for
ceilings 8 ft. or higher. For taller ceilings you may
want to use a longer downrod (sold separately).
Angle style mounting is best suited for angled or
vaulted ceilings. A longer downrod is sometimes
necessary to ensure proper blade clearance.
Closemount-style mounting is more suitable for
ceilings lower than 8 ft. (2,44 m) high.
2. Ensure that the blades of the fan are 30 in. (76 cm)
from any obstruction.
3. Check the downrod length to ensure the blades will
be at least 7 ft. (2,14 m) above your oor.
Turn off the circuit breakers and the wall switch to
the fan supply line leads. Failure to disconnect
the power supply prior to installation may result in
serious injury or death.
! !
Fig. 5
Fig. 4
Mounting
Bracket
Screws
Mounting
Bracket
Canopy
Washer
4. Loosen all mounting bracket screws. Remove the
two mounting bracket screws and washers from
the round holes of canopy. Set aside for later use.
Detach mounting bracket from canopy (Fig. 4).
5. Secure the mounting bracket to the outlet box using
screws and washers provided with the outlet box
(not included) (Fig. 5).
Note: It is very important to use proper hardware when
installing the mounting bracket as it supports the fan.
Important: If using the angle mount, ensure the open
end of the mounting bracket is installed facing the
peak of the ceiling.
6
MOUNTING BRACKET INSTALLATION
Mounting Bracket
Screw
Washer
Fig. 8
Downrod
Canopy
Yoke
Cover
Motor
Housing
Downrod
Clip
Downrod
Pin
Fig. 7
Fig. 6
Set Screws
7
STANDARD OR ANGLE MOUNTING INSTRUCTIONS
Downrod Pin
Downrod Clip
6. Partially loosen the two set screws in the yoke at
the top of the motor housing (Fig. 6).
7. Remove the downrod pin and downrod clip from
the downrod (Fig. 7).
8. Thread the wires from the motor housing through
the yoke cover, canopy, and out the top of the
downrod (Fig. 8).
8
STANDARD OR ANGLE MOUNTING INSTRUCTIONS
9. Slide the downrod into the yoke of the motor
housing, align the holes, and re-install the downrod
pin and downrod clip. Then re-tighten the two set
screws (Fig. 9).
10. Depending on the length of downrod you use, you
may need to cut the lead wires back to simplify the
wiring. If you decide to cut back the lead wires, it is
suggested that you do so in the following manner:
Take the lead wires and make sure that you have
pulled them all the way through the top of the
downrod and measure 8 in. (2,44 m) of lead wire,
and then cut the excess wire off with wire cutters
(not included) (Fig. 10).
11. If you cut back the lead wire in Step 10, strip 1/2
in. of insulation from the end of each wire. Twist
the stripped ends of each strand of wire within the
insulation with pliers (not included) (Fig. 11).
Note: If you did not cut back the lead wires in Step 10,
Step 11 is not necessary and you may proceed to
Step 12 instead.
Downrod
Downrod
Pin
Set Screw
Downrod
Clip
Fig. 9
Fig. 10
Fig. 11
Cut Wires
Stripped
Wires
Downrod Pin
Downrod Clip
9
STANDARD OR ANGLE MOUNTING INSTRUCTIONS
12. Install the downrod ball into the mounting bracket
opening. Align the slot in the ball with the tab in the
mounting bracket. The downrod should not rotate if
installed correctly (Fig. 12).
Mounting
Bracket
Downrod
Ball
Tab
Slot
Fig. 12
10
CLOSEMOUNT INSTRUCTIONS
13. Remove the canopy cover from the bottom of the
canopy (Fig. 13)
Helpful Hint: The downrod, hanging ball, and canopy
cover are not used in this type of installation.
15. Raise the fan and place the canopy on the
mounting bracket hook for wiring (Fig. 15).
Canopy
Canopy
Hook
Canopy
Cover
Fig. 13
Fig. 15
Closemount Screw
Fig. 14
14. Remove the three closemount screws and washers
from the top of the motor housing. Align the canopy
with the closemount screw holes in the top of the
motor housing. Secure the canopy to the top of
the motor housing by reinstalling the closemount
screws and washers into the top of the motor
housing (Fig. 14).
Spring Washer
Closemount
Screws
Spring
Washer
This manual suits for next models
2
Table of contents
Other Honeywell Fan manuals
Honeywell
Honeywell HTF090E Series User manual
Honeywell
Honeywell HV-140E User manual
Honeywell
Honeywell 50207 User manual
Honeywell
Honeywell HFT-3108B User manual
Honeywell
Honeywell CARMEL 50196 User manual
Honeywell
Honeywell D896 User manual
Honeywell
Honeywell HYF260B Series User manual
Honeywell
Honeywell EASTOVER 10214 User manual
Honeywell
Honeywell HT-900 Series TURBO FORCE User manual
Honeywell
Honeywell HYF290E User manual
Honeywell
Honeywell HS-1650 Series User manual
Honeywell
Honeywell HV-120 Series Installation instructions
Honeywell
Honeywell HTF337 Series User manual
Honeywell
Honeywell HYF013 series User manual
Honeywell
Honeywell HYF260E User manual
Honeywell
Honeywell V50L User manual
Honeywell
Honeywell DREAMWEAVER User manual
Honeywell
Honeywell HT-906 Series User manual
Honeywell
Honeywell HT-900 Series TURBO FORCE User manual
Honeywell
Honeywell QUIETSET HY-254 Series User manual
Popular Fan manuals by other brands
ELTA FANS
ELTA FANS H03VV-F installation guide
Hunter
Hunter 20714 Owner's guide and installation manual
Emerson
Emerson CARRERA VERANDA CF542ORB00 owner's manual
Hunter
Hunter Caraway Owner's guide and installation manual
Panasonic
Panasonic FV-15NLFS1 Service manual
Kompernass
Kompernass KH 1150 operating instructions
