Honeywell Hometronic HAV 20 Guide

Hometronic

ball valve

HAV 20, 25, 32

Mounting and operation

Application

The motor-driven Hometronic ball valve HAV opens or closes drinking

water conduits by means of a ball valve. It is controlled by the Home-

tronic Manager and allows e.g. watering during the owner's absence

while at the same time protecting from damage caused by water.

The ball valve is available in the nominal diameters DN 20, DN 25 and

DN 32. It is available ready to be mounted with drive and connecting

cable.

The ball valve has a very low noise level. It can be operated without a

tool in case of a power failure. The valve state (open/closed) is indicated

mechanically.

Mounting

Danger!

Danger to life through electric shock!

Live contacts are exposed while the module is being

connected electrically. Touching a live contact can cause

critical injuries.

►All work may only be carried out by authorized

specialized personnel.

►De-energize the corresponding fuse during all work on

the module.

It is advisable to install a cleaning filter in order to prolong the

service life of the valve and to protect the seals against

mechanical damage. Observe the relevant regulations, e.g. DIN

1988.

Selecting the mounting site

Depending on the mounting site selected, the ball valve can be used to

control the water supply of an entire house or of an individual apartment.

1. Existing

plumbing on

site (e.g. shut-

off valve)

2. Cleaning filter

(may already

exist)

3. Ball valve

Mounting

Caution!

The ball valve can impair the function of sprinkler systems

or similar water-based extinguishing systems.

Before mounting the module check whether an extinguishing

system is installed or is to be installed.

►If appropriate, select a different mounting site.

►Loosen the 2 screws M 6x15 (3)

on the bottom of the drive (1).

►Lift the drive off the valve (2).

►Install the ball valve at the

corresponding plumbing by

using a suitable tool (open-

ended spanner).

►Mount the device switch HS 30

as described in the mounting

and operating instructions of the

device switch. Ensure that the

cable has the right length!

Electrical connection

►Install an all-pole switch

with 3 mm opening on

site in the incoming

line.

►Wire the device switch

and ball valve in

accordance with the

adjacent diagram and

connect them to the

power supply.

Mounting

Assembling the ball valve

When selecting the mounting site

ensure that:

•The ball valve is accessible and

operable when power fails.

•The drive is mounted parallel to

the plumbing.

Mounting of the drive upside down

or transverse to the plumbing is

not allowed.

Right

Wrong

►Place the drive on the valve. Observe the plumbing direction!

►Screw the drive to the valve by using the 2 screws M 6x15.

►Assign the device switch HS 30 to the Hometronic Manager as

described in the operating instructions of the device switch.

Mounting has been completed.

Operation

Manual operation

The ball valve can be operated

manually if the power fails:

►Press the drive to the valve (1).

►Turn the drive by 90°(2).

The valve is closed.

Indication of the valve state (open/closed)

When the drive has been removed

Position of the valve axis:

(1) Closed

(2) Open

When the drive is mounted

Colored triangle in the indicator window

(1):

Red: Open

No Color: Closed

Technical data

Type designation HAV 20 HAV 25 HAV 32

Weight 0.88 kg 1.10 kg 1.42 kg

Nominal width DN 20 DN 25 DN 32

Power supply 230 V AC +6 ...–15% 50...60 Hz

Limit switch 5 (1) A, 230 V, 50 Hz

Power (operation consumption) 7.5 VA

Power (standby consumption) 3 VA

Protection standard IP 44 conforming to IEC 529

Protection class 2 conforming to EN 60335-1

Dimensions Refer to "Dimensions"

Rotation time 30 sec for 90°

Max. operating pressure PN 16

Max. initial torque 8 Nm

Connecting cable 4 x 0.5 mm, 2 m

Dimensions

Des. G KVS PN A B C D E H

HAV 20 ¾ " 4116144 124.5 19.5 90.5 77.5 84

HAV 25 1"68 16153 129.5 23.5 104 90 93

HAV 32 1¼ " 123 16163 134.5 28.5 119.5 105.5 103

All dimensions in mm, KVS in m3/h

Honeywell AG

Böblinger Straße 17

D – 71101Schönaich

Telephone ++49 (0) 7031637-300

The right is reserved to make

modifications This company is certified to

This document is definitive for the enclosed product and replaces all previous

publications.

EN1H-0165GE51_R1100

This manual suits for next models

Table of contents

Other Honeywell Control Unit manuals

Honeywell

Honeywell FIRE-LITE-ALARMS CMF-300 User manual

Honeywell

Honeywell AlarmNet IGSMHS Assembly instructions

Honeywell

Honeywell 2MLF-HO2A User manual

Honeywell

Honeywell VP513A User manual

Honeywell

Honeywell DS06D Operation manual

Honeywell

Honeywell 7800 SERIES User manual

Honeywell

Honeywell FALCON MJ Pulse/M-Bus User manual

Honeywell

Honeywell R4795A User manual

Honeywell

Honeywell VP525C User manual

Honeywell

Honeywell ADEMCO 5800RL User manual

Honeywell

Honeywell VR4300 User manual

Honeywell

Honeywell DCCC6500 User manual

Honeywell

Honeywell RV181 User manual

Honeywell

Honeywell 5496 User manual

Honeywell

Honeywell DIAL-SET DS05C Operation manual

Honeywell

Honeywell S89C User manual

Honeywell

Honeywell SmartValve SV9401 User manual

Honeywell

Honeywell TrueZONE ARD Series User manual

Honeywell

Honeywell Kromschroder GIK Series User manual

Honeywell

Honeywell NOTIFIER FCM-1 User manual

Honeywell

Honeywell RV284 User manual

Honeywell

Honeywell R7140G User manual

Honeywell

Honeywell SUPER TRADELINE VR8300A User manual

Honeywell

Honeywell V5097A-E Operation manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual